| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | GLC-T | |
| 2 | Alcatel-Lucent | SFP-GIG-T | |
| 3 | Brocade | E1MG-TX | |
| 4 | Cisco Meraki | MA-SFP-1GB-TX | |
| 5 | Huawei | SFP-1000BaseT | |
| 6 | IBM | 00FE333 | |
| 7 | Juniper Networks | JX-SFP-1GE-T | |
| 8 | HPE | JD089A | |
| 9 | HPE Procurve | J8177B | |
| 10 | IBM | 00FE333 | |
| 11 | Ruijie | MINI-GBIC-GT |
| Ruijie Compatible | MINI-GBIC-GT | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Data Rate | 1000Mbps |
| Connector | RJ-45 | Cable Distance | 100m |
| Media | Copper | Cable Type | Cat 5e/6/6a (UTP) |
| Max. Power Consumption | ≤1.2W | DDM Support | YES |
| Protocols | MSA Compliant, IEEE STD 802.3 and 802.3ab | Operation Temperature | 0 to 70°C (32 to 158°F) |
Standard: Cat5e or Cat6 twisted-pair cable is required to achieve full 100-meter Gigabit performance.
Note: Standard Cat5 cable may limit link stability at full 1G speed and is not recommended.
Live Insertion: The SFP RJ45 transceiver supports live insertion and removal.
Precaution: Avoid repeated hot swapping under continuous heavy traffic loads to ensure optimal hardware longevity.
Heat Dissipation: This 1Gbps copper module generates mild heat during operation.
Deployment Advice: Verify the switch thermal budget and ensure adequate ventilation before fully populating all SFP ports.
Fixed Rate: This RJ45 transceiver operates at a fixed 1000Mbps speed only.
Compatibility Warning: It cannot auto-negotiate down to 100Mbps or 10Mbps. The connected peer device must support 1G speed to successfully establish a link.
Storage Environment: Keep unused transceivers stored in dry, ESD-safe packaging.
Dust Protection: Always fit dust caps onto the RJ45 port when the module is not in service.
Built on SFP MSA and IEEE standards, this RJ45 transceiver also works with Cisco, Arista, MikroTik, Avaya Nortel and other mainstream network hardware, ideal for mixed-vendor legacy network upgrade projects.



The Core Features



FAQ
Q1: What real-world throughput can buyers expect from 1000BASE-T RJ45 transceiver deployments? A: Yes, this HYTOPTODEVICE Ruijie MINI-GBIC-GT compatible SFP RJ45 transceiver runs with low power consumption at roughly 1.2W. Although the 1000BASE-T physical layer supports a raw rate of 1Gbps, protocol overhead, signal interference and cable quality will cap practical throughput between 940–980 Mbps under ideal deployment conditions. When paired with certified Cat5e or Cat6 cabling within 100m, our RJ45 transceiver maintains this steady gigabit throughput for office and data center traffic loads.
Q2: How much latency gap exists between 1000BASE-T copper RJ45 transceiver and fiber gigabit modules? A: 1000BASE-T copper links carry marginally higher latency compared to fiber optic transceivers. HYTOPTODEVICE’s SFP RJ45 copper transceiver introduces approximately 0.3–0.6 microseconds of extra latency versus equivalent 1G fiber modules. This minor delay works well for office LAN, surveillance and basic storage traffic, while fiber remains preferred for applications requiring ultra-low latency.
Q3: How will heavy EMI interference affect 1000BASE-T RJ45 transceiver link performance? A: Severe electromagnetic interference will trigger rising packet loss and degrade 1000BASE-T link stability. The HYTOPTODEVICE Ruijie MINI-GBIC-GT compatible RJ45 transceiver includes built-in signal equalization to counter mild crosstalk, yet strong EMI noise will create bit errors. Deploying shielded copper cables helps reduce external interference and preserve reliable link operation inside dense equipment racks.
Q4: Can multiple 1000BASE-T RJ45 transceiver ports be grouped together via LACP for higher bandwidth? A: Yes, this HYTOPTODEVICE Ruijie-compatible SFP RJ45 transceiver fully supports LACP port aggregation. Multiple gigabit ports fitted with our modules can be bundled on Ruijie enterprise switches to boost total bandwidth and add link redundancy. LACP aggregation operates at the switch level, with each individual RJ45 transceiver running native 1000BASE-T.
Q5: Will continuous 24/7 heavy data transmission shorten the usable lifespan of 1000BASE-T RJ45 transceiver? A: Sustained heavy data transmission will not degrade performance of HYTOPTODEVICE’s 1000BASE-T RJ45 transceiver when operated within the rated temperature range. Every Ruijie MINI-GBIC-GT compatible module undergoes burn-in testing before shipment to validate long-duration reliability. Continuous traffic generates only mild heat, so proper rack ventilation is essential for round-the-clock network operation.
Q6: Is cable replacement mandatory to upgrade legacy networks to 1000BASE-T with SFP RJ45 transceiver? A: No, properly certified Cat5e cabling can support 1000BASE-T connections up to 100 meters. HYTOPTODEVICE Ruijie MINI-GBIC-GT compatible SFP RJ45 transceiver functions flawlessly on correctly terminated Cat5e wiring. Cable replacement is only necessary if cables suffer physical damage or fail formal cable certification testing.
Q7: Is old standard Cat5 wiring acceptable to run gigabit speeds with 1000BASE-T RJ45 transceiver? A: No, standard Cat5 cables cannot reliably sustain full 1000BASE-T gigabit speeds. HYTOPTODEVICE 1000BASE-T SFP RJ45 transceiver requires Cat5e or Cat6 copper media to maintain stable gigabit links within the 100m limit. Plain Cat5 cable only supports stable 100Mbps and often fails to establish gigabit connections entirely.
Q8: What impact do poor cable terminations and damaged RJ45 jack pins bring to 1000BASE-T transceiver links? A: 1000BASE-T technology is very sensitive to poor cable termination and defective RJ45 connectors. Minor wiring mistakes create crosstalk issues and may stop the HYTOPTODEVICE Ruijie MINI-GBIC-GT compatible RJ45 transceiver from locking a valid 1G link. Always inspect RJ45 pins and verify keystone jack termination before commissioning the network.
Q9: Can structured cabling systems including patch panels and wall outlets support 1000BASE-T RJ45 transceiver without performance drops? A: Yes, 1000BASE-T works across patch panels and wall jacks when all components meet Cat5e specifications and are wired correctly. HYTOPTODEVICE SFP RJ45 transceivers are designed to operate within standard structured cabling infrastructures. Too many connection points or low-grade wall jacks will accumulate signal loss and reduce gigabit performance.
Q10: What troubleshooting steps apply when gigabit connection cannot come up for SFP 1000BASE-T RJ45 transceiver? A: Link downgrade to 100Mbps generally originates from cable or connector faults rather than the HYTOPTODEVICE Ruijie MINI-GBIC-GT compatible RJ45 transceiver. This module is fixed-rate 1000Mbps only and cannot fall back to 100Mbps mode; a 100Mbps reading means no valid gigabit link is established. Check for damaged cables, bent connector pins and confirm the peer device supports gigabit operation.
Q11: Does upgrading old 100Mbps Fast Ethernet network with bulk RJ45 transceiver bring good ROI for small business sites? A: Yes, upgrading to HYTOPTODEVICE Ruijie MINI-GBIC-GT compatible SFP RJ45 transceivers delivers excellent value for small office networks. Our wholesale-priced gigabit copper transceivers deliver 10 times more bandwidth than 100Mbps fast ethernet. This upgrade speeds up file transfers and supports IP cameras plus NAS storage without large-scale infrastructure overhauls.
Q12: Are 1000BASE-T RJ45 transceiver and gigabit switch hardware high power consuming for network deployments? A: No, these 1000BASE-T copper RJ45 transceivers feature low power draw. The HYTOPTODEVICE Ruijie MINI-GBIC-GT compatible SFP transceiver adopts low-power hardware design with only ~1.2W power consumption. The overall power load mainly comes from the switch chassis; adding our gigabit RJ45 transceivers adds minimal extra power usage.
Q13: What hidden project expenses should network integrators plan for bulk 1000BASE-T RJ45 transceiver rollout? A: Major hidden expenses for mass 1000BASE-T rollouts come from cable certification, re-termination works and on-site network validation. HYTOPTODEVICE provides bulk SFP RJ45 transceivers and sample testing support to help wholesalers and integrators mitigate project risks. Setting aside budget for cable testing and spare transceiver stock prevents costly delays during deployment.
Q14: What service lifespan can network planners expect for 1000BASE-T switch and matching RJ45 transceiver hardware? A: With proper maintenance, 1000BASE-T switch hardware can remain operational for 8–12 years. HYTOPTODEVICE Ruijie MINI-GBIC-GT compatible SFP RJ45 transceivers match this long service life for Ruijie enterprise switching hardware. Gigabit copper access networks remain widely adopted and will not become obsolete in the near term.
Q15: Which field testing methods verify if cabling meets requirements for 1000BASE-T RJ45 transceiver installation? A: Professional cable validation tools are used by field technicians to verify cabling quality. These testers measure near-end crosstalk, signal attenuation and return loss to satisfy TIA/EIA industry cabling requirements. Complete full cable certification before installing HYTOPTODEVICE Ruijie MINI-GBIC-GT compatible SFP RJ45 transceivers, to avoid unstable gigabit links after network launch.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




