Категории

Optical Transceiver

SFP

1.25G SFP

1.25G BiDi SFP

1.25G CWDM SFP 80KM

1.25G DWDM SFP 80KM

155M SFP

155M BiDi SFP

1.25G CSFP

SONET/SDH SFP

SFP+

10G SFP+

10G BiDi SFP+

10G CWDM SFP+

10G DWDM SFP+80KM

Fibre Channel SFP+

Customized SFP+

XFP

10G XFP

10G BiDi XFP

10G CWDM XFP

10G DWDM XFP

Copper-T RJ45

10G Copper-T RJ45

1.25G Copper-T RJ45

25G SFP28

40G QSFP+

100G QSFP28

200G QSFP56

400G QSFP-DD

400G QSFP112

400G OSFP

800G OSFP/QSFP-DD

Ethernet Switch

800G OSFP InfiniBand

400G OSFP/QSFP112 InfiniBand

200G QSFP56 InfiniBand

100G QSFP28 InfiniBand

Active Optical Cable

10G SFP+ AOC

25G SFP28 AOC

40G QSFP+ AOC

100G QSFP28 AOC

200G QSFP56 AOC

800G QSFP-DD AOC

Direct Attach Cable

10G SFP+ DAC

25G SFP28 DAC

40G QSFP+ DAC

100G QSFP28 DAC

Optical Component

FEATURED

H3C QSFP-100G-D-CAB-1M Compatible 100G QSFP28 Passive Copper Twinax Cable 1m(3ft) Bulk Wholesale | HYTOPTODEVICE

Dell DAC-Q28-100G-1M Compatible 100G QSFP28 Passive Copper Twinax Cable 1m(3ft) Bulk Wholesale | HYTOPTODEVICE

Cisco QSFP-4SFP10G-CU3M Compatible QSFP+ 40G to 4x10G Breakout Cable 3m(10ft) Bulk Wholesale | HYTOPTODEVICE

Cisco QSFP-4SFP10G-CU2M Compatible QSFP+ 40G to 4x10G Breakout Cable 2m(7ft) Bulk Wholesale | HYTOPTODEVICE

IBM BN-QS-SP-CBL-1M Compatible 40G QSFP+ Passive Copper Breakout Twinax Cable 1m(3ft) Bulk Wholesale | HYTOPTODEVICE

NVIDIA(Mellanox) MC2609130-001 Compatible 40G QSFP+ Ethernet Passive Copper Breakout Twinax Cable 1m(3ft) Bulk Wholesale | HYTOPTODEVICE

Intel X4DACBL1 Compatible 40G QSFP+ Passive Direct Attach Copper Breakout Cable 1m(3ft) Bulk Wholesale | HYTOPTODEVICE

Dell 331-8149 Compatible 40G QSFP+ Passive Direct Attach Copper Breakout Cable 1m(3ft) Bulk Wholesale | HYTOPTODEVICE

Brocade 40G-QSFP-4SFP-C-0101 Compatible 40G QSFP+ DAC Breakout Cable 1m(3ft) Bulk Wholesale | HYTOPTODEVICE

Juniper QFX-QSFP-DACBO-1M Compatible 40G QSFP+ DAC Breakout Cable 1m(3ft) Bulk Wholesale | HYTOPTODEVICE

Fortinet SFP-10G54-BX80 10G BiDi SFP+ Module | 10GBASE-BX80-D 80km Tx1550Rx1490nm Bulk & Wholesale | HYTOPTODEVICE

Buy HYTOPTODEVICE Fortinet SFP‑10G54‑BX80 compatible 10G BiDi SFP+ transceiver. 10GBASE‑BX80‑D Tx1550/Rx1490, 80km OS2 single‑mode simplex LC. Bulk factory wholesale, custom EEPROM, OEM available for Fortinet switches & firewalls, distributors & integrators.

NO.	Brand	Compatible P/N	Transceiver Type
1	Cisco	SFP-10G54-BX80
2	Arista	SFP-10G54-BX80
3	Brocade	10G-SFPP-BXD-80K
4	Dell	GP-SFP-10GBX-D-80
5	Extreme	10GB-BX80-D
6	Juniper	SFP-10G54-BX80
7	D-Link	SFP-10G-BX80-D
8	Fortinet	SFP-10G54-BX80

GET A QUOTE

делиться:

Description

Fortinet SFP-10G54-BX80 Compatible 10G BiDi SFP+ Module | 10GBASE‑BX80‑D 80km Tx1550Rx1490nm Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 10G BiDi SFP+ transceiver serves as a drop‑in replacement for Fortinet SFP‑10G54‑BX80. Built to 10GBASE‑BX80‑D and SFF‑8472 MSA standards, this optic delivers stable 10.3125Gbps transmission up to 80km over OS2 single‑mode fiber, with Tx1550nm transmit and Rx1490nm receive wavelengths via simplex LC connector.

Pre‑programmed with Fortinet‑specific EEPROM data, it supports plug‑and‑play deployment without unsupported transceiver alarms on FortiSwitch and FortiGate devices running FortiOS / FortiSwitchOS. This single‑strand BiDi optic must pair with the complementary opposite wavelength module at the far end. HYTOPTODEVICE provides factory bulk stock, sample trial orders and OEM customization for wholesalers, distributors and system integrators deploying Fortinet long‑distance metro links.

Key Technical Specifications

Fortinet Compatible	SFP-10G54-BX80	Vendor Name	HYTOPTODEVICE
Form Factor	SFP+	Max Data Rate	10.7Gbps
Wavelength	TX1550nm/RX1490nm	Max Distance	80km
Connector	Simplex LC	Transmitter Type	1550nm EML
Cable Type	SMF	Receiver Type	APD
TX Power	-1.0~+4dBm	Receiver Sensitivity	< -23dBm
Max. Power Consumption	≤1.8W	Receiver Overload	-7dBm
Protocols	IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI	Operation Temperature	0 to 70°C (32 to 158°F)

For detailed technical specifications, please refer to the Datasheet

Usage Guidelines & Operational Best Practices

• BiDi Pairing Rule: SFP‑10G‑BXD (Tx1550/Rx1490) must pair with SFP‑10G‑BXU (Tx1490/Rx1550) at remote end. Two BXD modules will NOT form a valid link.

• Cabling Requirement: Use OS2 single‑mode simplex‑LC UPC cables only. Multimode fiber / APC connectors reduce reach and cause link issues; keep connectors clean.

• Optical Attenuator Required for Short Links: For testing or short-distance connections (<10km), connect a 12dB–15dB optical attenuator to the RX port to prevent damaging the receiver.(10KM

• Environment: Run within 0‑70 °C. Avoid high‑heat, dusty, poorly ventilated rack positions.

• Hot‑swap: Supports hot‑swap; disconnect fiber before plugging / unplugging to protect optical ports.

• DDM Monitoring: Enable DDM/DOM; monitor optical power and temperature for early fault warning.

• Pre‑test Recommendation: Test sample units with real hardware before large‑scale bulk deployment.

• Laser Safety: Avoid direct eye exposure to powered optical ports; infrared laser can harm eyes.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Supported Network Hardware

1. Validated Fortinet Hardware & Firmware

This module adopts Fortinet‑specific EEPROM, supporting zero‑alarm plug‑and‑play with official FortiOS / FortiSwitchOS firmware. All products are strictly tested, fully compatible with the below Fortinet hardware models:

FortiSwitch Enterprise Switches: FS‑124F, FS‑148F, FS‑424E, FS‑448E stackable campus switches with SFP+ uplinks
FortiSwitch Data‑Center Platforms: FS‑1024D, FS‑1048E high‑density fiber‑centric switch platforms
FortiGate Next‑Gen Firewalls: 200E, 300E, 400E, 500E series firewalls equipped with 10G SFP+ interfaces
Universal Compatibility: All Fortinet devices with standard 10G SFP+ ports supporting 10GBASE‑BX80‑D protocol

2. Cross‑Brand Interoperability

Built on universal MSA open standards, this SFP+ BiDi transceiver is interoperable with mainstream network brands including Arista, Juniper, D-Link, H3C, Huawei and Fortinet, adapting to mixed-vendor network upgrade and expansion scenarios.

3. Free Value-Added Services

Custom EEPROM programming for multi-platform compatibility
Sample testing available before bulk orders for project validation
Private label customization and professional deployment guides
Rigorous batch quality consistency control
Custom EEPROM configuration for special and legacy network setups
Free EEPROM recoding with 24/7 technical support

Primary Application Scenarios

Fortinet Enterprise Long‑Distance Branch Networking: Suitable for 80km point‑to‑point single‑fiber links connecting remote enterprise branches and campus sites built on FortiSwitch switches and FortiGate firewalls.
Carrier‑Grade Metro Aggregation Transmission: Deployed for operator metro access long‑haul transmission to relieve fiber shortage and reduce network construction costs.
Data Center Remote Interconnection: Used for long‑distance interconnection between geographically separated data centers and backup computer rooms to deliver stable 10G high‑bandwidth connectivity.
Cost‑Effective Fortinet Hardware Upgrade: High‑quality replacement alternative to expensive original Fortinet SFP‑10G54‑BX80 modules, lowering bulk network hardware procurement and operating expenses.
Global Wholesale & Resale: Stable batch supply for global optical module distributors and network engineering integrators, supporting private label resale business.

Connectivity Solutions(Applications)

1.Switch-to-Switch

HYTOPTODEVICE 80km 10g SFP+ BIDI TRANSCEIVER point‑to‑point single‑fiber links for carrier‑grade metro aggregation and remote site interconnection

2.Core to Access (With Structured Cabling)

The Core Features

1.Halve Your Fiber, Upgrade for Less

This 10G BiDi SFP+ transceiver carries transmit and receive over a single fiber strand, freeing up half your existing fiber resources while keeping a full 10G bidirectional link. Boost network capacity at a fraction of the cost of laying new cables.

hytoptodevice 10G SFP+ BIDI MODULE 80KM SMF TX1550RX1490nm

2.2x Capacity, Half the Cabling
A single fiber strand carries two wavelengths, enabling full-duplex 10G over one link. Double capacity per port, cut fiber cabling costs in half — no extra cables, no extra ports.

3.High-density, Low Power for Data Centers
Full 10G performance at just 1.8W. This SFP+ transceiver keeps high-density racks stable and cool, lowering both energy and cooling costs without compromising transmission quality.

4.Plug-and-Play Across Leading Brands
Drop into any multi-vendor environment with confidence. Every single unit is rigorously compatibility-tested on original switches from major vendors, so you get seamless, worry-free performance across Cisco, Juniper, Huawei and more. Real products, real switches, real results—Specific Compatibility Video available upon request.

hytoptodevice plug-and-play 10g sfp+ bidi transceiver 80km smf

hytoptodevice plug-and-play 10g sfp+ bidi transceiver 80km smf

5.Every Module Tested, Every Link Reliable
Reliability isn't a claim — it's engineered. Each 10G BiDi 80km SFP+ module clears signal integrity checks, full-distance runs, and extreme temperature cycling before leaving our Test Center, guaranteeing stable, packet-loss-free performance under any network load.

hytoptodevice comprehensive test for 80km 10g sfp+bidi optical transceiver module

hytoptodevice comprehensive test for 80km 10g sfp+bidi optical transceiver module

FAQ

Q1: Do I need specific firmware updates on my switch to recognize HYTOPTODEVICE 10GBASE‑BX80‑D 80km BiDi SFP+ compatible transceiver?

A: In most cases, modern switches with correct vendor‑specific EEPROM programming will recognize the HYTOPTODEVICE 10GBASE‑BX80‑D 80km BiDi SFP+ compatible transceiver without extra firmware upgrades. However, some older switch firmware versions may have transceiver whitelist restrictions. It is recommended to run your switch on the latest stable firmware release to avoid identification failures or alarm logs.

Q2: Do I need an APC or UPC fiber connector for HYTOPTODEVICE 80km single fiber BiDi 10G SFP+ optic module?

A: This HYTOPTODEVICE 80km single fiber BiDi 10G SFP+ optic module requires UPC simplex LC connectors. APC connectors produce higher insertion loss and return loss, which degrade long‑distance 80km link performance and are not supported for this module.

Q3: Can HYTOPTODEVICE 10G 80km BiDi SFP‑plus work on passive CWDM or DWDM multiplexed fiber network?

A: No. HYTOPTODEVICE 10G 80km BiDi SFP‑plus is a BiDi single‑fiber bidirectional module operating on fixed 1490/1550nm wavelengths, not standard CWDM/DWDM grid wavelengths. It cannot work over passive CWDM or DWDM multiplexer/demultiplexer systems. It is designed for direct point‑to‑point single‑fiber links only.

Q4: What is the minimum optical link budget for full‑range 80km transmission using HYTOPTODEVICE 10GBASE‑BX80‑D compatible BiDi transceiver?

A: This HYTOPTODEVICE 10GBASE‑BX80‑D compatible BiDi transceiver provides typical link budget around 24 dB. To reliably reach full 80km, total end‑to‑end link loss must stay below the module’s maximum allowable loss budget, reserving extra margin for splices, connectors and aging‑related fiber loss.

Q5: Will HYTOPTODEVICE 10G BiDi‑D 80km optical module still hit 80km with multiple splices and dirty LC connectors on fiber run?

A: Multiple splices and contaminated connectors add cumulative insertion loss. If total link loss exceeds the HYTOPTODEVICE 10G BiDi‑D 80km optical module’s available optical budget, you cannot achieve stable 80‑km transmission. Keep connectors clean, minimize splice count, and perform loss testing before deployment; reserve 3‑5 dB safety margin for real‑world field environments.

Q6: What laser type is built inside HYTOPTODEVICE 10GBASE‑BX80‑D 80km long‑reach BiDi SFP+ module, EML or DFB?

A: Our HYTOPTODEVICE 10GBASE‑BX80‑D 80km long‑reach BiDi SFP+ module uses high‑performance EML laser, delivering excellent spectral quality, low chirp and superior signal integrity optimized for 80‑kilometer single‑mode fiber long‑haul transmission.

Q7: Can high‑density switch overheating cause packet loss with HYTOPTODEVICE compatible 80‑kilometer BiDi 10G SFP+ transceivers?

A: Excessive high ambient temperature will degrade laser performance and receiver sensitivity of HYTOPTODEVICE compatible 80‑kilometer BiDi 10G SFP+ transceivers, potentially triggering bit‑errors or packet loss. Ensure proper cabinet airflow and cooling, keep operating temperature within 0‑70 °C commercial specification range. Hot‑swap modules help, but overheating conditions must be corrected.

Q8: Is there extra latency introduced by HYTOPTODEVICE 80km 10G BiDi SFP+ compared to short‑reach multimode optics?

A: The transceiver internal chip latency difference of HYTOPTODEVICE 80km 10G BiDi SFP+ versus short‑reach multimode optics is negligible. Almost all latency comes from light propagation speed inside fiber, around 5 μs per kilometer for single‑mode fiber, which is physical fiber‑distance‑dependent, not caused by the transceiver hardware itself.

Q9: Do I get packet drops when received optical power is near sensitivity limit for HYTOPTODEVICE 10G 80km single‑strand BiDi transceiver?

A: Yes. When received optical power approaches the receiver sensitivity threshold for HYTOPTODEVICE 10G 80km single‑strand BiDi transceiver, bit‑error‑rate rises sharply, leading to intermittent packet loss and unstable link flapping. Always maintain sufficient optical power margin above the minimum receive sensitivity value.

Q10: Are HYTOPTODEVICE 10GBASE‑BX80‑D 80km BiDi transceivers eye‑safe when fiber cable is unplugged?

A: HYTOPTODEVICE 10GBASE‑BX80‑D 80km BiDi transceivers are Class 1 laser eye‑safe under normal operating conditions when fiber connectors are properly mated. Never look directly into an active optical port or bare fiber end, invisible infrared laser radiation can cause permanent eye injury. Power off ports before inspecting bare fiber ends.

Q11: How long is the factory warranty for HYTOPTODEVICE third‑party replacement 10G 80km BiDi SFP+ optical transceivers?

A: All HYTOPTODEVICE third‑party replacement 10G 80km BiDi SFP+ optical transceivers come with 5‑year factory warranty. Exact warranty period follows your sales contract; defective units can be replaced under warranty for quality‑related failures, excluding damage from improper installation, physical crush, surge or field environmental abuse.

Q12: Can I buy single spare HYTOPTODEVICE BX80‑D unit instead of full matched BiDi transceiver pair for point‑to‑point link?

A: BiDi links require strictly matched‑pair transceivers: one unit Tx1550/Rx1490 (BX80‑D) and its opposite‑end partner Tx1490/Rx1550 (BX80‑U). You may purchase single‑unit spare HYTOPTODEVICE BX80‑D unit if you confirm you get the correct complementary wavelength direction; mismatched single modules cannot establish link.

Q13: How do I tell BX80‑D and BX80‑U HYTOPTODEVICE 10G 80km BiDi SFP+ modules apart before installation?

A: Check printed part‑number and wavelength marking on the HYTOPTODEVICE 10G 80km BiDi SFP+ transceiver housing label. BX80‑D = Tx1550 nm / Rx1490 nm; BX80‑U = Tx1490 nm / Rx1550 nm. Always cross‑check labels before installation; do not rely on memory alone.

Q14: Troubleshooting: how to confirm HYTOPTODEVICE 10G BiDi‑80K module fault versus bad single‑mode fiber cable issue?

A: Perform step‑by‑step troubleshooting: swap with known‑good spare HYTOPTODEVICE optic to isolate hardware fault; use optical power meter to test transmit / receive optical levels; inspect and clean LC connectors; run OTDR fiber test to check splice loss, breakpoints and overall fiber‑link quality. Compare DDM readouts against specification values.

Q15: What troubleshooting steps should I take if DDM reports "Rx Power Low" on HYTOPTODEVICE 10GBASE‑BX80‑D 80km BiDi SFP‑plus?

A: Low received optical power indicates insufficient light arriving at receiver of HYTOPTODEVICE 10GBASE‑BX80‑D 80km BiDi SFP‑plus. Actions: clean both ends of LC connectors; inspect fiber for bends, crush damage or bad splices; verify correct matched‑pair BiDi module is used; measure real‑world link loss with optical power meter; reduce total link loss or shorten fiber distance if loss exceeds module budget.

Packaging & Custom OEM Solutions

Each module ships individually sealed in ESD-safe packaging, protected from static from our warehouse to your shelf—and ready to ship on receipt of order. Volume buyers and system integrators also unlock our full OEM program: custom logos, private labeling, and branded packaging, all designed to help you build and protect your own brand.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
Ample stock, fast global DHL/FedEx shipping in 3–5 working days
Free pre-sales engineering support for custom EEPROM & private label firmware
Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.