| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | GLC-TE-I | |
| 2 | Juniper Networks | SFP-GE-T-I | |
| 3 | Arista | SFP-GE-T-I | |
| 4 | Alcatel-Lucent | SFP-GIG-T-I | |
| 5 | Brocade | SFP-GE-T-I | |
| 6 | Huawei | SFP-GE-T-I | |
| 7 | H3C | SFP-GE-T-I | |
| 8 | Dell | SFP-GE-T-I | |
| 9 | HPE Aruba | SFP-GE-T-I | |
| 10 | HPE Procurve | SFP-GE-T-I |
Product Overview
HYTOPTODEVICE’s Juniper SFP-GE-T-I compatible industrial copper SFP module delivers 1000BASE-T gigabit Ethernet transmission over twisted pair cabling. Built to withstand harsh industrial settings, this rugged transceiver maintains stable high-speed data transfer while resisting extreme temperature shifts, electromagnetic interference and mechanical vibration. It fits industrial automation, smart grid infrastructure, railway communication and factory floor networks where standard commercial transceivers fail. This hot-pluggable RJ45 SFP transceiver supports up to 100m links over Cat5e or Cat6 cable. Compliant with IEEE 802.3ab and SFP MSA standards. Pre-flashed EEPROM enables seamless plug-and-play operation on Juniper Junos OS without transceiver warning logs. It operates at fixed 1000Mbps only and does not support 10/100Mbps speeds.
Key Technical Specifications
| Juniper Compatible | SFP-GE-T-I | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Data Rate | 1000Mbps |
| Connector | RJ-45 | Cable Distance | 100m |
| Media | Copper | Cable Type | Cat 5e/6/6a (UTP) |
| Max. Power Consumption | ≤1.2W | DDM Support | YES |
| Protocols | MSA Compliant, IEEE STD 802.3 and 802.3ab | Operation Temperature | -40 to 85°C (-40 to 185°F) |
Standard: Cat5e or Cat6 twisted-pair cable is required to achieve full 100-meter Gigabit performance.
Note: Standard Cat5 cable may limit link stability at full 1G speed and is not recommended.
Live Insertion: The SFP RJ45 transceiver supports live insertion and removal.
Precaution: Avoid repeated hot swapping under continuous heavy traffic loads to ensure optimal hardware longevity.
Heat Dissipation: This 1Gbps copper module generates mild heat during operation.
Deployment Advice: Verify the switch thermal budget and ensure adequate ventilation before fully populating all SFP ports.
Fixed Rate: This RJ45 transceiver operates at a fixed 1000Mbps speed only.
Compatibility Warning: It cannot auto-negotiate down to 100Mbps or 10Mbps. The connected peer device must support 1G speed to successfully establish a link.
Storage Environment: Keep unused transceivers stored in dry, ESD-safe packaging.
Dust Protection: Always fit dust caps onto the RJ45 port when the module is not in service.
Built on SFP MSA and IEEE standards, it works with Cisco, Juniper, Extreme, Brocade, MikroTik, Huawei, HPE and more for mixed-brand industrial automation, smart grid and railway deployments.



The Core Features



FAQ
Q1: Can this Juniper-compatible industrial copper SFP transceiver run at 10Mbps or 100Mbps speeds?
A: No. HYTOPTODEVICE Juniper SFP-GE-T-I compatible industrial copper SFP module is locked to fixed 1000Mbps operation. The connected Juniper port must be configured for gigabit mode to establish a valid link.
Q2: What host hardware requirements apply to deploy this rugged industrial copper SFP module properly?
A: The switch or router must feature standard SFP ports supporting 1000BASE-T. This HYTOPTODEVICE copper SFP transceiver follows SFP MSA and IEEE 802.3ab standards to sustain reliable gigabit links in high EMI and vibration-prone industrial sites.
Q3: Which copper cable types support the full 100-meter reach of this industrial 1000BASE-T SFP module?
A: Cat5e or Cat6 twisted pair cabling is required to hit the full 100m distance. Legacy Cat5 cable creates signal loss and unstable connections. Cat6/Cat6a is recommended for superior noise suppression in industrial environments.
Q4: Can this industrial copper SFP transceiver create gigabit links between network gear from different vendors?
A: Yes, cross-vendor interoperability is fully supported under IEEE and SFP MSA standards. This HYTOPTODEVICE copper SFP module works on multi-brand industrial network hardware as long as ports support 1000BASE-T.
Q5: Does this industrial copper SFP module include integrated auto MDI/MDIX crossover functionality?
A: Yes, built-in auto MDI/MDIX crossover removes the need for special crossover cables. Standard straight-through patch cables can be used directly for on-site installation.
Q6: What power consumption should be expected when populating multiple copper SFP transceivers in high-density Juniper switch or router chassis?
A: Each module consumes approximately ~1.2W. Low power design reduces heat buildup when many SFP ports are populated in compact industrial chassis.
Q7: What industrial networking scenarios are most suitable for this rugged 1000BASE-T copper SFP transceiver?
A: It is built for factory automation, smart grid, railway and shop-floor networking environments. HYTOPTODEVICE rugged copper SFP transceiver withstands harsh operating conditions where ordinary commercial transceivers fail to operate reliably.
Q8: Does this industrial copper SFP module offer DDM digital diagnostics to monitor real-time operating parameters?
A: No, DDM/DOM monitoring is unavailable for this RJ45 copper transceiver. Link status and port statistics can be viewed via the Juniper Junos OS management dashboard.
Q9: Is this transceiver compatible with Juniper EX and MX series network hardware?
A: Yes. Preloaded SFP-GE-T-I EEPROM identity ensures smooth recognition across Juniper EX2300, EX3400, MX and QFX platforms without transceiver warning logs.
Q10: Can I hot swap this industrial copper SFP module while the Juniper switch or router remains powered and online?
A: Yes, it meets SFP MSA hot-swap specifications. Frequent repeated hot plugging should be minimized to reduce mechanical wear on the SFP connector.
Q11: Can this copper SFP transceiver maintain stable gigabit links across the full -40℃ to +85℃ industrial temperature range?
A: Yes. Rated for -40℃ ~ +85℃ and validated with 3-temperature burn-in testing. HYTOPTODEVICE copper SFP module maintains consistent 1000BASE-T links in harsh industrial environments.
Q12: Will 802.1X port-based network access control operate normally on ports fitted with this industrial copper SFP module?
A: Yes, 802.1X authentication functions without disruption. This HYTOPTODEVICE copper SFP transceiver forwards Ethernet frames transparently and does not interfere with security authentication traffic.
Q13: What happens to active connections if the power supply fails on a Juniper switch loaded with this industrial copper SFP module?
A: Without redundant power supply, the network device will power off and drop all active copper links. Redundant power supplies are recommended for mission-critical industrial LAN deployments.
Q14: Can network monitoring platforms capture port-mirrored traffic over links using this industrial copper SFP transceiver?
A: Yes, port mirroring works as expected. This HYTOPTODEVICE copper SFP transceiver forwards mirrored network packets unchanged for traffic inspection and troubleshooting.
Q15: Can HYTOPTODEVICE customise the EEPROM programming of this industrial copper SFP module for Juniper network hardware?
A: Yes. HYTOPTODEVICE offers free EEPROM customization for bulk orders to match SFP-GE-T-I identifier and suppress transceiver warning logs on Juniper devices.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




