| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Aruba | SFP-TX | |
| 2 | Avaya | 700283872 | |
| 3 | D-link | DGS-712 | |
| 4 | DELL | 310-7225 | |
| 5 | Extreme | MGBIC-02 | |
| 6 | F5 Networks | F5-UPG-SFPC-R | |
| 7 | Fortinet | FN-TRAN-GC | |
| 8 | H3C | SFP-GE-T | |
| 9 | HPE BladeSystem | 453154-B21 | |
| 10 | Netgear | AGM734 | |
| 11 | Nortel | AA1419043-E6 |
| H3C Compatible | SFP-GE-T | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Data Rate | 1000Mbps |
| Connector | RJ-45 | Cable Distance | 100m |
| Media | Copper | Cable Type | Cat 5e/6/6a (UTP) |
| Max. Power Consumption | ≤1.2W | DDM Support | YES |
| Protocols | MSA Compliant, IEEE STD 802.3 and 802.3ab | Operation Temperature | 0 to 70°C (32 to 158°F) |
Standard: Cat5e or Cat6 twisted-pair cable is required to achieve full 100-meter Gigabit performance.
Note: Standard Cat5 cable may limit link stability at full 1G speed and is not recommended.
Live Insertion: The SFP RJ45 transceiver supports live insertion and removal.
Precaution: Avoid repeated hot swapping under continuous heavy traffic loads to ensure optimal hardware longevity.
Heat Dissipation: This 1Gbps copper module generates mild heat during operation.
Deployment Advice: Verify the switch thermal budget and ensure adequate ventilation before fully populating all SFP ports.
Fixed Rate: This RJ45 transceiver operates at a fixed 1000Mbps speed only.
Compatibility Warning: It cannot auto-negotiate down to 100Mbps or 10Mbps. The connected peer device must support 1G speed to successfully establish a link.
Storage Environment: Keep unused transceivers stored in dry, ESD-safe packaging.
Dust Protection: Always fit dust caps onto the RJ45 port when the module is not in service.
Built on SFP MSA and IEEE industry standards, this RJ45 SFP Module also works with Fortinet, Dell, Extreme and other mainstream network hardware, suitable for mixed-brand enterprise and campus network renovation projects.



The Core Features



FAQ
Q1: How will this RJ45 SFP Module behave on H3C campus switches under heavy concurrent user traffic?
A: 1000BASE-T can handle multi-user heavy traffic within its 1Gbps per-port bandwidth limit. HYTOPTODEVICE H3C SFP-GE-T compatible RJ45 SFP Module supports standard Ethernet flow control to reduce packet loss during traffic surges. Once traffic exceeds 1Gbps per port, packet queuing delays will appear, so QoS configuration is recommended for busy campus LANs.
Q2: Can this RJ45 SFP Module deliver sufficient bandwidth for centralized NAS storage and large file sharing in enterprise LAN?
A: 1000BASE-T delivers stable throughput for large office file transfers, though it will become a bottleneck for 8K raw media workflows. Our HYTOPTODEVICE RJ45 SFP Module maintains consistent 1Gbps for daily NAS access and file sharing. For high-volume 8K media workloads, upgrading to 10G links brings better performance.
Q3: What throughput limitations should I expect when connecting wireless APs via this RJ45 SFP Module on H3C switches?
A: 1000BASE-T creates bandwidth bottlenecks for Wi-Fi7 access points under full load. This HYTOPTODEVICE H3C-compatible RJ45 SFP Module provides maximum 1Gbps port bandwidth. A single fully loaded Wi-Fi7 AP can exceed 1Gbps, so 10G uplinks are recommended for high-density wireless deployments. Wi-Fi6 with limited users works fine over gigabit.
Q4: Does the RJ45 SFP Module support full-duplex bidirectional transmission over Cat5e copper cable?
A: Yes, 1000BASE-T operates in full-duplex mode. This HYTOPTODEVICE RJ45 SFP Module supports 1Gbps upload and 1Gbps download at the same time over one twisted-pair copper cable, reaching up to 2Gbps aggregate bandwidth.
Q5: Is the 1000BASE-T RJ45 SFP Module suitable for new smart campus and IP camera surveillance network builds?
A: 1000BASE-T meets connection demands for most IP cameras and IoT sensors in smart campus environments, but cannot support future high-speed endpoints. HYTOPTODEVICE RJ45 SFP Module works reliably for surveillance and environmental monitoring devices. Plan a 10G upgrade path if high-performance workstations will be added later.
Q6: What maximum cable distance can I run with this RJ45 SFP Module before signal degradation happens?
A: The IEEE standard maximum transmission distance for 1000BASE-T is 100 meters using certified Cat5e or Cat6 UTP cable. This HYTOPTODEVICE H3C SFP-GE-T compatible RJ45 SFP Module strictly complies with IEEE specs. Cables longer than 100m result in signal loss, higher BER and random link flapping.
Q7: Is shielded STP cable mandatory for the RJ45 SFP Module, or will standard UTP cable work normally?
A: Standard unshielded Cat5e/Cat6 UTP works great for regular office and campus environments. STP shielded cabling is only required for industrial sites with strong electromagnetic interference. Our HYTOPTODEVICE RJ45 SFP Module maintains stable links on regular UTP in typical H3C campus network deployments.
Q8: Can the H3C compatible RJ45 SFP Module establish links with legacy 10/100Mbps network equipment?
A: No, this HYTOPTODEVICE RJ45 SFP Module is pure gigabit only. It locks at fixed 1000Mbps and does not support 10/100 auto-negotiation. The connected peer hardware must support gigabit speed to build a valid network link.
Q9: Which type of patch cord delivers the most stable performance when paired with this RJ45 SFP Module?
A: Factory pre-tested certified patch cables offer more consistent gigabit performance. Field-crimped cables may introduce crosstalk and connection errors with poor termination. When matched with HYTOPTODEVICE RJ45 SFP Module, pre-made Cat5e/Cat6 patch cords reduce troubleshooting time during H3C network rollouts.
Q10: For campus LAN construction, is it more economical to deploy standalone switches or H3C switches equipped with RJ45 SFP Module?
A: Separate 1G switches cost less upfront for small-scale networks. Medium and growing campus networks achieve better long-term ROI using H3C switches with available SFP slots populated with HYTOPTODEVICE RJ45 SFP Module, cutting total hardware and maintenance expenses.
Q11: How complex is the port configuration for an RJ45 SFP Module on H3C enterprise switches?
A: Basic networking knowledge is sufficient for standard deployment. Ports using HYTOPTODEVICE RJ45 SFP Module work plug-and-play. Managed H3C switch ports need simple VLAN configuration, which does not require expert engineering skills for most enterprise IT teams.
Q12: Will adding multiple VLANs reduce the throughput of a copper port fitted with RJ45 SFP Module?
A: Properly configured VLANs barely affect 1000BASE-T throughput since VLAN tagging is processed by hardware ASIC. Misconfiguration such as oversized broadcast domains or mismatched trunk settings can trigger broadcast storms and degrade links with HYTOPTODEVICE RJ45 SFP Module.
Q13: What cooling requirements apply when multiple RJ45 SFP Module are installed in rack-mounted H3C switches?
A: Rack-mounted switches require front-to-back airflow and unobstructed ventilation. Each HYTOPTODEVICE RJ45 SFP Module consumes only ~1.2W and generates minimal heat. Even so, fully loaded racks need functional fans to prevent thermal throttling of the main switch board.
Q14: What network hazards are introduced by redundant inter-switch links using RJ45 SFP Module copper ports?
A: Redundant links without loop protection create network loops. STP/RSTP automatically detects and blocks redundant network paths. Even with HYTOPTODEVICE RJ45 SFP Module installed, enabling spanning tree on H3C managed switches prevents broadcast storms and full network outages.
Q15: What warranty and technical support can bulk purchasers receive when ordering RJ45 SFP Module from HYTOPTODEVICE?
A: Reliable transceiver manufacturers provide multi-year hardware warranty plus optional professional technical support packages. HYTOPTODEVICE supplies 1000BASE-T RJ45 SFP Module with quality warranty, batch test reports and pre-sales & after-sales technical support for wholesalers, integrators and bulk buyers.
Q16: Will firmware upgrades on H3C switches impact the operation of this compatible RJ45 SFP Module?
A: Firmware upgrades are low-risk if following official H3C operation guides. Remember to back up switch configurations before updating firmware. HYTOPTODEVICE RJ45 SFP Module itself requires no firmware updates; compatibility depends fully on the host H3C switch firmware version.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




