• F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE

F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE

Source F5 Networks F5-UPG-SFPC-R compatible RJ45 SFP Module directly from HYTOPTODEVICE factory. This 1G 1000BASE-T copper transceiver supports 100m Cat5e/Cat6 links for F5 load balancer and network appliances. Bulk factory wholesale, sample evaluation and flexible MOQ for distributors, integrators and bulk buyers.
NO. Brand  Compatible P/N Transceiver Type
1 Aruba  SFP-TX
2 Avaya 700283872
3 D-link  DGS-712
4 DELL  310-7225
5 Extreme  MGBIC-02
6 F5 Networks  F5-UPG-SFPC-R 
7 Fortinet  FN-TRAN-GC
8 H3C  SFP-GE-T
9 HPE BladeSystem  453154-B21
10 Netgear  AGM734 
11 Nortel  AA1419043-E6
Description

F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE F5 Networks F5-UPG-SFPC-R compatible RJ45 SFP Module delivers stable 1000BASE-T gigabit Ethernet transmission over twisted-pair copper cabling. This hot-swappable SFP copper transceiver with RJ45 port supports up to 100-meter reach for F5 load balancers and enterprise network appliance upgrades. Built to IEEE 802.3ab and SFP MSA standards, pre-programmed F5-UPG-SFPC-R EEPROM ensures automatic recognition on F5 appliance OS without unsupported transceiver warning logs. This RJ45 SFP Module runs fixed 1000Mbps only and cannot auto-negotiate down to 100M/10M speeds. HYTOPTODEVICE manufactures this RJ45 SFP Module for network wholesalers, system integrators and bulk purchasers.

Key Technical Specifications

F5 Networks Compatible F5-UPG-SFPC-R Vendor Name HYTOPTODEVICE
Form Factor SFP  Data Rate 1000Mbps
Connector RJ-45 Cable Distance 100m
Media Copper Cable Type Cat 5e/6/6a (UTP)
Max. Power Consumption ≤1.2W DDM Support YES
Protocols MSA Compliant, IEEE STD 802.3 and 802.3ab Operation Temperature 0 to 70°C (32 to 158°F)

  For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

1. Cabling Requirement

  • Standard: Cat5e or Cat6 twisted-pair cable is required to achieve full 100-meter Gigabit performance.

  • Note: Standard Cat5 cable may limit link stability at full 1G speed and is not recommended.

2. Hot-Plug Support

  • Live Insertion: The SFP RJ45 transceiver supports live insertion and removal.

  • Precaution: Avoid repeated hot swapping under continuous heavy traffic loads to ensure optimal hardware longevity.

3. Thermal Management

  • Heat Dissipation: This 1Gbps copper module generates mild heat during operation.

  • Deployment Advice: Verify the switch thermal budget and ensure adequate ventilation before fully populating all SFP ports.

4. Speed Limitation

  • Fixed Rate: This RJ45 transceiver operates at a fixed 1000Mbps speed only.

  • Compatibility Warning: It cannot auto-negotiate down to 100Mbps or 10Mbps. The connected peer device must support 1G speed to successfully establish a link.

5. Storage & Maintenance

  • Storage Environment: Keep unused transceivers stored in dry, ESD-safe packaging.

  • Dust Protection: Always fit dust caps onto the RJ45 port when the module is not in service.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Firmware Adaptation

1. Validated Target Hardware & Firmware

This 1000BASE-T copper transceiver uses F5-UPG-SFPC-R matched EEPROM coding for seamless plug-and-play detection without transceiver warning alerts. All modules pass end-to-end traffic testing and maximum distance validation before delivery:
  • F5 BIG-IP Series Load Balancers: BIG-IP iSeries, VIPRION
  • F5 Advanced WAF & traffic management appliances
  • Any network hardware fitted with standard SFP ports supporting 1000BASE-T

2. Multi‑Brand Cross Interoperability

Built on SFP MSA and IEEE standards, this copper RJ45 transceiver also works with Cisco, Arista, MikroTik, Avaya Nortel and other mainstream network hardware, ideal for mixed-vendor legacy network upgrade projects.

3.Value-Added Services

HYTOPTODEVICE provides free custom EEPROM programming, pre-sales technical consultation, test sample support, custom labeling and packaging services for wholesalers, integrators and bulk buyers working on 1000BASE-T SFP copper deployments.


Primary Application Scenarios

  • Enterprise access layer fixed gigabit copper connections
  • F5 BIG-IP load balancer 1000BASE-T RJ45 SFP Module uplink deployment
  • Server NIC to top-of-rack access switch short copper patch links
  • Legacy network upgrades converting SFP slots to fixed-rate RJ45 gigabit ports
  • Office LAN, IP camera and storage gigabit connections (endpoints must support 1G)


Connectivity Solutions(Applications)

1. 1G to 1G for Switch-Switch

2.1G Connectivity with Switch-NIC


3.1G Structured Cabling Connectivity



The Core Features

1.Low power design for reliable 1G copper connectivity.

These low-power SFP transceivers deliver stable 1G copper connectivity, perfectly suited for Gigabit Ethernet deployments in data centers.
1000BASE-T SFP transceiver, low power, 1G copper connectivity for data center Gigabit Ethernet networking


2.Tested in Host Devices for Proven Interoperability

Each RJ45 transceiver module undergoes host device testing to deliver proven interoperability with mainstream switches and routers. Specific Compatibility Video available upon request.

1000BASE-T SFP transceiver, fully tested on host devices for proven interoperability with mainstream network hosts

3. Full-Range Quality Inspection

Full-process quality control and multi-stage inspection are implemented to secure stable and consistent module performance before shipment.Curious how? Tour the Test Center.
000BASE-T SFP transceiver with comprehensive quality management and multi-stage inspection for reliable performance


FAQ

Q1: How will 1000BASE-T ports behave under heavy concurrent user traffic and network congestion?

A: 1000BASE-T handles congested multi-user traffic within its 1Gbps per-port bandwidth limit. HYTOPTODEVICE F5 Networks F5-UPG-SFPC-R compatible RJ45 SFP Module supports standard Ethernet flow control to minimize packet loss during traffic spikes. If aggregate traffic exceeds 1Gbps per port, packet queuing delays occur; QoS tuning is recommended for busy data center environments.

Q2: Can 1000BASE-T deliver enough bandwidth for collaborative 4K/8K video editing and bulk media file transfers?

A: 1000BASE-T works well for compressed 4K media transfers but acts as a bottleneck for uncompressed 8K raw video workflows. Our HYTOPTODEVICE RJ45 SFP Module provides stable 1Gbps throughput for team-based 4K editing. For continuous large-volume 8K raw media transmission, upgrading to 10G network links delivers much smoother operation.

Q3: Do Wi-Fi 6 or Wi-Fi7 access points hit throughput limits when connected via 1000BASE-T uplink ports?

A: Yes, 1000BASE-T creates bandwidth bottlenecks for fully loaded Wi-Fi7 APs. This HYTOPTODEVICE F5-compatible RJ45 SFP Module delivers a maximum of 1Gbps per port. A single Wi-Fi7 AP under peak load can easily exceed 1Gbps, so 10G uplinks are recommended for high-density wireless deployments. Wi-Fi6 with small user groups works fine on 1G.

Q4: Does 1000BASE-T copper cable support simultaneous upload and download data transmission at full speed?

A: Yes, 1000BASE-T operates in full-duplex bidirectional mode. This HYTOPTODEVICE RJ45 SFP Module supports 1Gbps upload and 1Gbps download at the same time over a single twisted pair copper cable, reaching up to 2Gbps total aggregate bandwidth.

Q5: Will 1000BASE-T infrastructure remain adequate for smart office and building automation requirements in the coming years?

A: 1000BASE-T meets requirements for most smart office IoT sensors and cameras, but it cannot satisfy future high-bandwidth endpoints. HYTOPTODEVICE RJ45 SFP Module works reliably for IP cameras and environmental detectors. Plan for a 10G upgrade path if you will deploy high-speed workstations during network expansion.

Q6: What is the maximum copper cable length allowed for 1000BASE-T before signal quality deteriorates?

A: The IEEE standard maximum transmission distance for 1000BASE-T is 100 meters using certified Cat5e or Cat6 UTP. This HYTOPTODEVICE F5 F5-UPG-SFPC-R compatible RJ45 SFP Module strictly follows IEEE specifications. Cables longer than 100m cause signal attenuation, increased BER and unstable link flapping.

Q7: Is shielded STP cable mandatory for 1000BASE-T, or can standard unshielded UTP cables work properly?

A: Regular unshielded Cat5e/Cat6 UTP cabling is sufficient for most indoor enterprise and data center environments. STP shielded cable is only required in industrial locations with strong electromagnetic interference. Our HYTOPTODEVICE RJ45 SFP Module runs steadily on standard UTP for typical office and server room networks.

Q8: Can older 10/100 Fast Ethernet endpoints connect normally to a 1000BASE-T appliance port?

A: Legacy 10/100Mbps devices can connect only when the host F5 appliance port supports speed auto-negotiation. This HYTOPTODEVICE RJ45 SFP Module runs fixed 1000Mbps only. Without speed negotiation on the appliance side, the link will fail to establish with older Fast Ethernet hardware.

Q9: Are factory-terminated patch cords more dependable than field-crimped cables for gigabit Ethernet connections?

A: Pre-made factory-certified patch cables deliver more consistent gigabit performance. Field-terminated cables may suffer from crosstalk and wiring faults if crimped incorrectly. When paired with HYTOPTODEVICE RJ45 SFP Module, pre-assembled Cat5e/Cat6 patch cords reduce on-site network troubleshooting time.

Q10: Which network setup delivers better long-term value: multiple standalone 1G switches or one high-density modular appliance?

A: Separate fixed 1G switches cost less upfront for small-scale networks. Medium and large growing data centers gain more benefits from high-density modular appliances with SFP slots that accept HYTOPTODEVICE RJ45 SFP Module, lowering total hardware and network management expenses over time.

Q11: Do network engineers need advanced expertise to configure a 1000BASE-T port on F5 network appliances?

A: Basic networking knowledge is sufficient for routine deployment. Unmanaged appliances fitted with HYTOPTODEVICE RJ45 SFP Module work plug-and-play. Managed F5 appliances require simple VLAN and traffic shaping setup, which does not demand expert-level IT skills for most network administrators.

Q12: How do VLAN segmentation and tagging impact throughput performance on 1000BASE-T appliance ports?

A: Properly configured VLANs barely impact 1000BASE-T throughput since VLAN tagging is processed by hardware ASIC. Poor configuration, such as excessive broadcast domains or mismatched trunk settings, may trigger broadcast storms and degrade links equipped with HYTOPTODEVICE RJ45 SFP Module.

Q13: What airflow and cooling requirements apply to densely populated rack-mounted 1000BASE-T network appliances?

A: High-density rack appliances require front-to-back airflow and unobstructed rack ventilation. Each HYTOPTODEVICE RJ45 SFP Module consumes merely ~1.2W and generates minimal heat. Even so, fully populated racks need functional fans to avoid thermal throttling of the main appliance board.

Q14: What creates network loops within 1000BASE-T LANs, and what protective protocols stop this issue?

A: Network loops arise when redundant inter-device links exist without loop prevention. STP/RSTP automatically detects and blocks redundant network paths. Even with HYTOPTODEVICE RJ45 SFP Module installed, enabling spanning tree on managed F5 appliances prevents broadcast storms and full network outages.

Q15: What hardware warranty and technical support services can bulk buyers get from reputable 1000BASE-T transceiver suppliers?

A: Trusted suppliers commonly provide multi-year hardware warranty plus optional professional technical support packages. HYTOPTODEVICE supplies 1000BASE-T RJ45 SFP Module with quality warranty, batch test reports and pre-sales & after-sales technical support for wholesalers, integrators and bulk buyers.

Q16: Are firmware updates for managed gigabit network appliances simple and low-risk if following official operating procedures?

A: Firmware upgrades are straightforward and low-risk as long as users follow official guides. Always back up appliance configurations before performing firmware updates. HYTOPTODEVICE RJ45 SFP Module itself requires no firmware updates; compatibility depends entirely on the host F5 appliance firmware version.


Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging


Why Network Engineers Choose HYTOPTODEVICE


HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order 


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.


hytoptodevice 10g sfp+ bidi transceiver testing certification

Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice testing devices for compatibility of sfp+ bidi 10g optical module


  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE
  • F5 Networks F5-UPG-SFPC-R Compatible RJ45 SFP Module 100m | 1000BASE-T  Copper Transceiver, Bulk Factory Wholesale | HYTOPTODEVICE

Download