| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Aruba | SFP-TX | |
| 2 | Avaya | 700283872 | |
| 3 | D-link | DGS-712 | |
| 4 | DELL | 310-7225 | |
| 5 | Extreme | MGBIC-02 | |
| 6 | F5 Networks | F5-UPG-SFPC-R | |
| 7 | Fortinet | FN-TRAN-GC | |
| 8 | H3C | SFP-GE-T | |
| 9 | HPE BladeSystem | 453154-B21 | |
| 10 | Netgear | AGM734 | |
| 11 | Nortel | AA1419043-E6 |
| Extreme Compatible | MGBIC-02 | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Data Rate | 1000Mbps |
| Connector | RJ-45 | Cable Distance | 100m |
| Media | Copper | Cable Type | Cat 5e/6/6a (UTP) |
| Max. Power Consumption | ≤1.2W | DDM Support | YES |
| Protocols | MSA Compliant, IEEE STD 802.3 and 802.3ab | Operation Temperature | 0 to 70°C (32 to 158°F) |
Standard: Cat5e or Cat6 twisted-pair cable is required to achieve full 100-meter Gigabit performance.
Note: Standard Cat5 cable may limit link stability at full 1G speed and is not recommended.
Live Insertion: The SFP RJ45 transceiver supports live insertion and removal.
Precaution: Avoid repeated hot swapping under continuous heavy traffic loads to ensure optimal hardware longevity.
Heat Dissipation: This 1Gbps copper module generates mild heat during operation.
Deployment Advice: Verify the switch thermal budget and ensure adequate ventilation before fully populating all SFP ports.
Fixed Rate: This RJ45 transceiver operates at a fixed 1000Mbps speed only.
Compatibility Warning: It cannot auto-negotiate down to 100Mbps or 10Mbps. The connected peer device must support 1G speed to successfully establish a link.
Storage Environment: Keep unused transceivers stored in dry, ESD-safe packaging.
Dust Protection: Always fit dust caps onto the RJ45 port when the module is not in service.
Built on SFP MSA and IEEE standards, this copper RJ45 transceiver also works with Cisco, Arista, MikroTik, Avaya Nortel and other mainstream network hardware, ideal for mixed-vendor legacy network upgrade projects.



The Core Features



FAQ
Q1: How does 1000BASE-T perform under high traffic load with many concurrent users accessing the network?
A: 1000BASE-T can handle multi-user heavy traffic within its 1Gbps per-port bandwidth cap. HYTOPTODEVICE Extreme MGBIC-02 compatible RJ45 SFP Module supports standard Ethernet flow control to mitigate packet loss during traffic surges. When total traffic exceeds 1Gbps per port, packet queuing delays will appear, so enabling QoS is recommended for busy enterprise LAN environments.
Q2: Can 1000BASE-T deliver enough bandwidth for large 4K and 8K video file editing and file transfers?
A: 1000BASE-T works reliably for compressed 4K media file transfer but creates a bottleneck for uncompressed 8K raw video workflows. Our HYTOPTODEVICE RJ45 SFP Module delivers stable 1Gbps throughput for 4K collaborative editing. For heavy 8K raw media transfer, 10G network links are recommended for smoother workflow.
Q3: Will Wi-Fi 6 or Wi-Fi7 wireless access points hit speed limits when connected over 1000BASE-T ports?
A: Yes, 1000BASE-T creates bandwidth bottlenecks for Wi-Fi7 APs under full load. This HYTOPTODEVICE Extreme compatible RJ45 SFP Module provides maximum 1Gbps port bandwidth. A single fully loaded Wi-Fi7 AP can easily surpass 1Gbps throughput, so 10G uplink is ideal for high-density wireless deployments. Wi-Fi6 with low concurrent users can operate normally on 1G.
Q4: Does 1000BASE-T support simultaneous upload and download data transmission on one copper cable?
A: Yes, 1000BASE-T supports full-duplex bidirectional transmission. This HYTOPTODEVICE RJ45 SFP Module runs full-duplex mode, supporting 1Gbps upload and 1Gbps download at the same time over one copper twisted pair cable, delivering up to 2Gbps total aggregate bandwidth.
Q5: Will 1000BASE-T infrastructure remain suitable for smart office automation needs in coming years?
A: 1000BASE-T is adequate for most smart office IoT devices, though not fully future-proof for high-bandwidth applications. HYTOPTODEVICE RJ45 SFP Module works perfectly for IP cameras, environmental sensors and office endpoints. For future high-speed workstation connections, plan an upgrade path to 10G during network expansion.
Q6: What is the maximum copper cable distance for 1000BASE-T before signal quality starts to degrade?
A: The IEEE standard maximum reach for 1000BASE-T is 100 meters over certified Cat5e or Cat6 UTP. This HYTOPTODEVICE Extreme MGBIC-02 compatible RJ45 SFP Module strictly follows IEEE specs. Cables longer than 100m trigger signal attenuation, higher BER and intermittent link flapping.
Q7: Must I use shielded STP cabling, or will regular unshielded UTP cables work for 1000BASE-T links?
A: Standard unshielded Cat5e/Cat6 UTP cabling is sufficient for regular indoor enterprise environments. STP shielded cable is only required in high EMI industrial spaces with heavy machinery. Our HYTOPTODEVICE RJ45 SFP Module delivers stable performance with standard UTP in typical office and campus networks.
Q8: Can older 10/100 Fast Ethernet hardware connect properly to a 1000BASE-T switch port?
A: Legacy 10/100Mbps devices can connect only if the host Extreme switch port supports speed auto-negotiation. This HYTOPTODEVICE RJ45 SFP Module only runs fixed 1000Mbps. Without switch-side speed negotiation, the link will fail to connect with old Fast Ethernet hardware.
Q9: Are factory assembled patch cords more reliable than on-site terminated cables for gigabit Ethernet links?
A: Factory pre-made certified patch cables deliver more consistent gigabit performance. Field-terminated cables are prone to crosstalk and wiring faults if crimped incorrectly. When paired with HYTOPTODEVICE RJ45 SFP Module, pre-assembled Cat5e/Cat6 patch cords reduce network troubleshooting time.
Q10: Which option offers better total cost, multiple standalone 1G switches or one high-density modular switch?
A: Standalone fixed 1G switches have lower upfront cost for small networks. Medium-to-large growing enterprise sites benefit more from one high-density modular switch with SFP slots accepting HYTOPTODEVICE RJ45 SFP Module, cutting long-term hardware and network management costs.
Q11: Do network administrators require advanced technical expertise to set up a 1000BASE-T switch?
A: Basic networking knowledge is enough for routine deployment. Unmanaged Extreme switches fitted with HYTOPTODEVICE RJ45 SFP Module operate plug-and-play. Managed switches require simple VLAN and QoS setup, which does not demand expert-level IT training for enterprise network administrators.
Q12: How does VLAN tagging and partitioning affect the throughput of 1000BASE-T switch ports?
A: Correctly configured VLANs have almost no impact on 1000BASE-T throughput, as VLAN tagging is processed by switch ASIC hardware. Improper configuration such as excessive broadcast domains or mismatched trunk settings can trigger broadcast storms and degrade links using HYTOPTODEVICE RJ45 SFP Module.
Q13: What ventilation requirements apply to densely populated rack-mounted 1000BASE-T switches?
A: High-density rack switches need proper front-to-back airflow and unrestricted rack ventilation. Each HYTOPTODEVICE RJ45 SFP Module consumes only ~1.2W and produces minimal heat. Still, fully populated racks need working fans to avoid thermal throttling on the switch mainboard.
Q14: What causes network loops on 1000BASE-T LANs, and what methods stop this issue?
A: Network loops appear when redundant inter-switch links exist without loop protection. STP/RSTP automatically detects and blocks redundant paths. Even with HYTOPTODEVICE RJ45 SFP Module installed, enabling spanning tree protocol on managed Extreme switches prevents broadcast storms and full network outages.
Q15: What warranty coverage and technical support services can buyers expect from trusted 1000BASE-T transceiver suppliers?
A: Reputable vendors generally provide multi-year hardware warranty plus optional professional technical support packages. HYTOPTODEVICE offers quality warranty, batch test reports and pre-sales & after-sales technical support for 1000BASE-T RJ45 SFP Module for wholesalers, integrators and bulk buyers.
Q16: Is firmware upgrade for managed gigabit switches simple and low-risk if operated properly?
A: Firmware updates are straightforward and low-risk when following official operation guides. Always back up switch configurations before upgrading firmware. HYTOPTODEVICE RJ45 SFP Module do not require firmware updates themselves; compatibility relies fully on the host Extreme switch firmware version.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




