| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | WSP-Q40GLR4L | |
| 2 | Arista Networks | QSFP-40G-LRL4 | |
| 3 | Brocade | 40G-QSFP-LR4L | |
| 4 | EdgeCore | ET6401-IR4 | |
| 5 | H3C | QSFP-40G-LR4L-WDM1300 | |
| 6 | HPE H3C | JL286A | |
| 7 | Huawei | QSFP-40G-LR4-Lite | |
| 8 | Juniper | JNP-QSFP-40GE-IR4 | |
| 9 | NVIDIA(Mellanox) | MC2210511-IR4 | |
| 10 | Palo Alto Networks | PAN-QSFP-40GBASE-LM4 |
| NVIDIA(Mellanox) Compatible | MC2210511-IR4 | Vendor Name | HYTOPTODEVICE |
| Form Factor | QSFP+ | Max Data Rate | 41.2Gbps (4x 10.3Gbps) |
| Wavelength | 1310nm | Max Distance | 2km |
| Connector | Duplex LC | Transmitter Type | DFB CWDM |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | -7.0~2.3dBm | Receiver Sensitivity | < -11.5dBm |
| Power Consumption | ≤3.5W | Modulation | NRZ |
| Protocols | 40G Ethernet, Fibre Channel, SATA/SAS3, MSA Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm CWDM4 module.
Distance Specification:Max 2km (OS2 SMF). Dirty end faces, excessive splicing and sharp bending reduce actual transmission distance.
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.
Operating Environment: 0°C–70°C commercial temperature range. Ensure cabinet ventilation to avoid optical power attenuation from overheating.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Pre-calibrated Palo Alto-specific EEPROM ensures seamless plug-and-play recognition and avoids port lock or unstable link issues. All stocked modules go through real machine burn-in and temperature cycling validation for Palo Alto PA series firewalls.
Validated Platforms:
Primary Application Scenarios




1. 40G QSFP+ Connectivity for High-Density Data Centers
Speed without the overhead. The QSFP+ 40G 2km transceiver delivers full 40G throughput into dense data center racks — while drawing less power and occupying less space than you'd expect.



FAQ
Q1: Why does Palo Alto firewall throw unsupported transceiver alert after installing 40G QSFP+ replacement module? A: Vendor lock or EEPROM coding mismatch is the root cause. HYTOPTODEVICE pre-programs proper coding for Palo Alto firewall platforms; if the warning persists, verify port speed settings, upgrade firewall firmware or contact us for module recoding service.
Q2: Can I pair HYTOPTODEVICE third-party 40G QSFP+ optic with OEM transceiver on opposite sides of a single-mode fiber link? A: Yes, mixed-brand transceiver deployment works reliably. Both sides only need to comply with 40GBASE-IR4/LR4 standard and use single-mode fiber, different transceiver brands will not break the optical connection.
Q3: Can Palo Alto compatible 40G QSFP+ transceiver split into four separate 10G ports just by adding simple breakout cable? A: Simple breakout cable cannot split this 40G LR4L signal to independent 10G ports. Unlike SR4, its four 10G lanes share one fiber pair via WDM, so CWDM mux/demux or active media converter is required for 4×10G separation.
Q4: Does HYTOPTODEVICE 40G QSFP+ transceiver support DDM DOM alarm reporting on Palo Alto next-gen firewalls? A: This LR4L module fully supports standard DDM/DOM alarm functions. It outputs per-wavelength temperature, voltage, transmit and receive power data via standard MSA registers for your Palo Alto firewall to read.
Q5: What fiber type should I select to deploy PAN-QSFP-40GBASE-LM4 compatible 40G QSFP+ transceiver? A: This transceiver only works with standard single-mode fiber G.652 or G.657. Multimode fiber cannot support LR4L operation; multimode fiber is exclusively for SR4 optical modules.
Q6: Can my current single-mode fiber cabling support future 100G network upgrade while using 40G QSFP+ transceivers? A: Your existing duplex single-mode fiber plant can be reused for later 100G LR4 migration. The same fiber cabling meets 100G LR4 requirements; you only need to upgrade firewall ports and optical transceivers.
Q7: What fiber patch cable specifications match HYTOPTODEVICE 40G QSFP+ transceiver for Palo Alto firewall uplink deployment? A: You need duplex LC-LC OS2 single-mode patch or trunk cables. Both fiber ends must use LC connectors with UPC polish, which is the standard interface for this 40G QSFP+ module.
Q8: Can I reuse existing installed single-mode trunk fiber cables for Palo Alto 40G QSFP+ optical links? A: Most existing single-mode trunk cables are reusable for this 40G QSFP+ link. Confirm they are duplex LC OS1/OS2 fiber and total insertion loss stays under the LR4L power budget before deployment.
Q9: How to confirm HYTOPTODEVICE 40G QSFP+ transceiver is genuine new stock instead of counterfeit or refurbished? A: You can verify authenticity with serial traceability and factory test documentation. HYTOPTODEVICE provides 4-wavelength test reports, batch records and DOA warranty support to prove genuine new modules.
Q10: What compliance certifications are available for HYTOPTODEVICE Palo Alto compatible 40G QSFP+ transceiver modules? A: Our 40G QSFP+ transceivers carry CE, FCC, RoHS and REACH certifications under ISO9001 controlled manufacturing. Contact HYTOPTODEVICE to request certification copies before bulk purchase.
Q11: Will HYTOPTODEVICE 40G QSFP+ transceiver performance degrade significantly after long continuous runtime inside firewall racks? A: Slow per-lane aging is normal and trackable via DDM readings. Sudden performance drops are caused by fiber contamination, overheating or ESD damage rather than natural module aging.
Q12: Why is HYTOPTODEVICE 40G QSFP+ transceiver price lower than original Palo Alto OEM optical modules? A: Our lower price comes from direct factory supply without OEM brand premium and multi-layer channel markup. HYTOPTODEVICE compatible modules deliver identical performance for standard 40GBASE-LR4L fiber links.
Q13: What RMA support will I get if my HYTOPTODEVICE 40G QSFP+ transceiver arrives DOA dead on arrival? A: HYTOPTODEVICE provides free DOA replacement within 30 days of receipt. Keep original packaging and test logs ready to speed up the RMA approval and replacement process.
Q14: Can I request sample units of PAN-QSFP-40GBASE-LM4 compatible 40G QSFP+ transceiver for pre-project compatibility validation? A: HYTOPTODEVICE offers discounted or qualified samples for bulk buyers, and sample cost can be credited back on your first large order. This lets you test compatibility on Palo Alto firewalls before full deployment.
Q15: What is the correct installation method for 40G QSFP+ transceiver into Palo Alto firewall QSFP+ port? A: Align the module keyway and insert gently then latch into the port. Never force insertion, as misalignment may scratch the module internal contacts and damage the Palo Alto firewall port.
Q16: How to troubleshoot inactive fiber link after installing HYTOPTODEVICE 40G QSFP+ transceiver on Palo Alto firewall? A: Follow a fixed troubleshooting sequence to locate the root cause. Check module seating, LC connector cleanliness, TX/RX fiber polarity, fiber type, link distance, total insertion loss and DDM per-lane readings step by step.
Packaging & Custom OEM Solutions
Every 40G QSFP+ SR4 module ships in sealed ESD-safe packaging, ready for same-day dispatch. Bulk orders offer OEM customization—logo printing and private labeling—tailored for network distributors, integrators, and enterprise deployments.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.



