Q1: What optical power budget can this 1.25G 100km long-distance fiber optic transceiver provide?
A: This H3C SFP-GE-LH100-SM1550 compatible fiber optic transceiver features a professional 28–33dB optical link budget. This ample margin fully offsets 1550nm single-mode fiber attenuation, splicing loss and connector insertion loss, ensuring stable error-free transmission for 100km long-haul links. It is a reliable high-margin fiber optic transceiver solution for enterprise long-distance networking procurement.
Q2: How sensitive is this 1550nm 100km gigabit fiber optic transceiver for signal reception?
A: The 1.25G 1550nm long-haul fiber optic transceiver delivers ultra-high receiver sensitivity of ≤-28dBm. Equipped with premium PIN receiver chips, this H3C compatible module captures weak optical signals efficiently at 100km distance, guaranteeing stable link reception and superior overall transmission performance for bulk optical module purchases.
Q3: Is it feasible to deploy this 100km fiber optic transceiver for shorter-distance fiber links?
A: This 100km fiber optic transceiver supports flexible deployment on 20km and 40km medium and short fiber links with the same 1550nm wavelength. To avoid optical power saturation and hardware damage caused by excessive signal power, users must install a 10–15dB optical attenuator during deployment, making it a versatile multi-scenario optical module for project networking.
Q4: Which fiber medium is required to support stable 100km 1550nm long-haul transmission?
A: Stable 100km 1550nm long-haul transmission strictly requires standard G.652 single-mode fiber. This H3C SFP-GE-LH100-SM1550 compatible fiber optic transceiver perfectly matches the low-attenuation characteristics of G.652 SMF, minimizing signal loss and ensuring consistent long-distance transmission quality for enterprise backbone network construction.
Q5: Do fiber line aging and defective splicing joints affect long-term 100km link stability?
A: Fiber aging, poor splicing and contaminated fiber end faces will increase overall link loss and reduce the optical power budget margin, gradually degrading 100km link stability and causing occasional packet loss. Regular fiber inspection, cleaning and maintenance can maintain optimal operating status of this long-haul fiber optic transceiver for long-term stable operation.
Q6: Does this H3C compatible fiber optic transceiver support real-time digital optical monitoring functions?
A: This H3C compatible fiber optic transceiver fully supports DDM/DOM digital diagnostic monitoring. It enables real-time monitoring of key operating data including working temperature, transmit optical power, receive optical power and supply voltage, facilitating remote operation and maintenance and real-time fault detection for enterprise network management.
Q7: What is the rated power consumption level of this 1.25G long-range SFP fiber module?
A: This high-efficiency 1.25G 100km SFP fiber optic transceiver features ultra-low power consumption design, with the maximum power consumption strictly less than 1W under standard 3.3V operating voltage. Its energy-saving chip structure effectively reduces long-term power consumption of enterprise network equipment, making it an ideal low-power fiber optic transceiver for large-scale bulk deployment and long-term network operation.
Q8: Is dispersion compensation hardware necessary for 100km 1.25G long-distance transmission?
A: No additional DCM dispersion compensation module is required. Optimized for 1550nm wavelength and low-rate 1.25G transmission, this fiber optic transceiver produces negligible chromatic dispersion within 100km G.652 fiber links, achieving stable transmission without extra auxiliary equipment and simplifying network deployment costs.
Q9: Can this gigabit long-haul fiber module adapt to standard SONET/SDH transmission protocols?
A: This 1000BASE-EZX fiber optic transceiver is mainly optimized for Gigabit Ethernet transmission. It supports common enterprise network transmission protocols and is compatible with conventional OC-24 and STM-8 SONET/SDH standard transmission scenarios, meeting multi-protocol access demands for diversified enterprise network projects.
Q10: Does the module’s EEPROM firmware comply with international SFF-8472 industry standards?
A: This H3C SFP-GE-LH100-SM1550 compatible fiber optic transceiver strictly complies with SFF-8472 industry standards. The customized EEPROM firmware perfectly matches H3C device verification protocols, realizing plug-and-play, zero-alarm identification and ensuring full compatibility with mainstream enterprise network equipment.
Q11: Is rate auto-negotiation down to 100Mbps available on this gigabit fiber optic transceiver?
A: This fiber optic transceiver is a fixed gigabit-rate module designed for 1.25Gbps Gigabit Ethernet transmission. It does not support auto-negotiation down to 100Mbps 100BASE-FX rate, ensuring stable gigabit long-haul transmission performance without rate fluctuation for professional backbone network links.
Q12: Is field rewriting and modification of the module EEPROM firmware supported?
A: The EEPROM firmware of this H3C dedicated fiber optic transceiver is pre-programmed and optimized for H3C device compatibility. On-site secondary coding is not recommended. We support professional factory customized firmware modification services to meet personalized equipment matching and bulk project customization needs.
Q13: Can standard 1.25G SFP modules run normally on 10G SFP+ switch ports? A: This 1.25G SFP fiber optic transceiver is compatible with mainstream SFP+ 10G ports through downward compatibility design. It can work normally on 10G enterprise switches and routers, realizing gigabit long-haul transmission on existing 10G port devices and maximizing the utilization rate of customer existing network equipment.
Q14: What operating temperature grades and ranges do these bulk fiber modules support?
A: This standard commercial-grade fiber optic transceiver supports a stable operating temperature range of 0℃ to 70℃, adapting to conventional indoor enterprise computer rooms and network equipment environments. For special outdoor or industrial high and low temperature scenarios, we support customized temperature-grade module bulk orders and exclusive quotation services.
Q15: What causes unlinked LED status after installing 100km SFP modules at both transmission ends?
A: The unlit Link LED is mainly caused by incorrect TX/RX fiber polarity, mismatched fiber type, poor end face cleanliness or insufficient optical power margin. It is recommended to check fiber connection polarity, use standard G.652 single-mode fiber and clean fiber end faces to restore normal link connection of the fiber optic transceiver.