| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-25G-iER-S | |
| 2 | Cisco | SFP-25G-iER-S-I | |
| 3 | Arista Networks | SFP-25G-ER-Lite | |
| 4 | Arista Networks | SFP-25G-ER-Lite-I | |
| 5 | Brocade | 25G-SFP28-ER-Lite | |
| 6 | Brocade | 25G-SFP28-ER-Lite-I | |
| 7 | NVIDIA(Mellanox) | SFP28-25GER-31 |
| NVIDIA(Mellanox) Compatible | SFP28-25GER-31 | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP28 | Max Data Rate | 25Gbps |
| Wavelength | 1310nm | Max Distance | 30km |
| Connector | Duplex LC | Transmitter Type | DML 1310nm |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | 0~+6dBm | Receiver Sensitivity | < -19dBm |
| Max. Power Consumption | ≤2.2W | Receiver Overload | -4dBm |
| Protocols | MSA Compliant, CPRI, eCPRI | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.
Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade 25GBASE-ER 30KM module performance.
Distance & Link Budget: Supports up to a 30 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.
Port Compatibility Check: This optic only works on native 25G SFP28 ports. It can physically insert into SFP+ slots but will not negotiate 25G speed. Confirm your hardware or multi-vendor switch supports 25GBASE-LR standard before plugging in
Optical Attenuator Required for Short Links: For testing or short‑distance connections (<20km), connect a 10dB–15dB optical attenuator to the RX port to prevent damaging the receiver.(20KM<Distance<30km,connect 5‑10dB optical attenuator)
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1.Validated NVIDIA(Mellanox) Hardware & Firmware
This 25G SFP28 ER Lite 30km optical transceiver uses NVIDIA/Mellanox customized EEPROM coding, ensuring smooth plug-and-play recognition and eliminating third-party transceiver warning logs under Mellanox Onyx firmware. Every finished unit undergoes strict burn-in and multi-temperature stability testing before shipment to guarantee full hardware compatibility:
2.Multi‑Brand Cross Interoperability
Designed with open MSA specifications, this optic supports error-free signal transmission and complete CLI identification across Cisco, Arista, Brocade, Juniper and other mainstream network hardware, delivering flexible multi-vendor deployment options for system integrators.
3.Free Value-Added Services
Custom EEPROM programming for multi-platform compatibility
Pre-bulk sample testing for project validation
Private label customization and deployment guides
Strict batch quality control
EEPROM configuration for legacy network environments
Free EEPROM recoding plus 24/7 technical support
Primary Application Scenarios
• Metro Carrier Backbone Links: Designed for 30km long-span single-mode fiber connections between campus and metropolitan network nodes.
• 5G Radio Fronthaul & Backhaul: Provides high-density, low-latency 25G optical links for 5G base station CPRI/eCPRI transmission infrastructure.
• Data Center Inter-Switch Uplinks: Ideal for long-distance rack uplink, cross-site interconnection and leaf-spine data center architecture.
• Enterprise & Smart City Infrastructure: Supports fiber trunk upgrades for smart grid, municipal surveillance and campus wide-area networks.
• Telecom Wholesale & OEM Supply: Stable bulk sourcing solution for telecom distributors, value-added resellers and system integration projects.



The Core Features
1. Low Power & High Port Density

2. Host Validated for Reliable Interoperability
Pre-flashed EEPROM matching target SFP28 25G ER specs, plug and play without unsupported transceiver warnings and saves site debugging time.Specific Compatibility Video available upon request.


Q1: Does this Mellanox compatible transceiver integrate genuine DML laser components calibrated for 1310nm optical transmission? A: YES. This HYTOPTODEVICE NVIDIA Mellanox compatible 25G SFP28 ER Lite transceiver adopts genuine industrial-grade DML laser tuned for 1310nm transmission, matched with high-performance APD receiver to achieve our published specs: 0~+6dBm transmit power, -19dBm receiving sensitivity and -4dBm overload rating to support stable 30km fiber links.
Q2: Must RS-FEC functionality be enabled on host NVIDIA network hardware to reach the full 30km fiber transmission distance? A: YES. RS-FEC must be activated on your NVIDIA/Mellanox host switch or adapter to reach the full 30km reach. FEC corrects bit errors caused by fiber attenuation and chromatic dispersion, enabling our HYTOPTODEVICE 25G ER Lite module to maintain error-free transmission over the complete G.652 single-mode fiber span.
Q3: How much optical power budget reserve can network buyers get for a complete 30km fiber link installation? A: YES. The total optical power budget of this HYTOPTODEVICE 25G SFP28 ER Lite module reaches 19dB, calculated from Tx 0~+6dBm and Rx sensitivity -19dBm. This leaves sufficient margin to cover fiber loss, splice loss and connector insertion loss for 30km G.652 single-mode fiber deployment.
Q4: What will the peak power draw of this transceiver be when operating under extreme high-temperature stress? A: YES. Even under full thermal stress at 70℃, the power consumption of this NVIDIA Mellanox compatible 25G ER Lite optic remains below 2.2W. HYTOPTODEVICE low-power design minimizes thermal load for high-density NVIDIA/Mellanox port deployments.
Q5: How effectively can the built-in optical engine mitigate chromatic dispersion across standard G.652 single mode fiber cables? A: YES. Our premium DML+APD optical engine is optimized for G.652 SMF chromatic dispersion. The HYTOPTODEVICE 25G ER Lite transceiver suppresses signal distortion caused by dispersion to preserve clean 25.78Gbps NRZ signals across 30km fiber spans.
Q6: Are protective optical dust caps shipped together with each transceiver unit, and do these caps meet industrial field handling requirements? A: YES. Each HYTOPTODEVICE NVIDIA Mellanox compatible 25G SFP28 ER Lite transceiver is shipped with LC dust caps that meet industrial handling standards. These caps protect optical ports from dust and contamination during bulk shipment and field installation for system integrators.
Q7: Can the metal transceiver housing deliver sufficient EMI shielding performance within electrically noisy industrial environments? A: YES. The die-cast metal housing of this 25G ER Lite module delivers reliable EMI shielding. It protects high-speed signal paths from electromagnetic interference in noisy industrial, metro and 5G fronthaul deployments for HYTOPTODEVICE bulk buyers.
Q8: What ESD protection rating is built into the gold-plated electrical edge connector of this SFP28 transceiver? A: YES. This HYTOPTODEVICE 25G SFP28 ER Lite module integrates 8kV contact ESD protection on the electrical edge connector. It prevents static damage during hot swap and field handling, an essential feature for wholesale network hardware integrators.
Q9: Is the onboard EEPROM programmed to remove third-party transceiver block restrictions on NVIDIA, Cisco, Juniper and Arista network hardware? A: YES. HYTOPTODEVICE pre-loads customized EEPROM firmware for this NVIDIA(Mellanox) SFP28-25GER-31 compatible transceiver. It bypasses third-party transceiver lock alerts on NVIDIA, Cisco, Juniper and Arista hardware for plug-and-play recognition without complex manual configuration.
Q10: Can the integrated DOM monitoring system accurately report Tx/Rx optical power, temperature, voltage and laser bias values following SFF-8472 specification? A: YES. Full DOM/DDM monitoring compliant with SFF-8472 standard is fully supported. This HYTOPTODEVICE 25G ER Lite module accurately reports Tx power, Rx power, temperature, supply voltage and laser bias data for real-time network monitoring on NVIDIA Onyx OS.
Q11: Are field technicians able to rewrite EEPROM configuration data using standard SFP28 programming hardware? A: YES. Field technicians can re-program the EEPROM of this HYTOPTODEVICE 25G SFP28 ER Lite optic using standard SFP28 programming hardware. This flexible capability supports custom branding and private label requests for distributors and bulk purchasers.
Q12: Does this transceiver fully satisfy SFF-8402 and SFF-8432 mechanical and electrical MSA specifications? A: YES. This NVIDIA Mellanox compatible 25G ER Lite transceiver fully satisfies SFF-8402 and SFF-8432 mechanical and electrical MSA standards. It ensures proper physical fit and stable electrical handshake within NVIDIA and multi-brand SFP28 switch ports.
Q13: Are internal alarm thresholds properly calibrated to avoid false positive alerts inside network management platforms? A: YES. HYTOPTODEVICE calibrates internal alarm thresholds during factory testing. This 25G ER Lite module minimizes false alarms on NVIDIA network management systems, reducing unnecessary trouble tickets for carrier and enterprise network operators.
Q14: Is this optic capable of transmitting CPRI/eCPRI signals for 5G fronthaul alongside standard 25G Ethernet traffic? A: YES. This HYTOPTODEVICE 25G SFP28 ER Lite transceiver supports CPRI and eCPRI pass-through for 5G fronthaul applications together with standard 25G Ethernet. It serves as a flexible option for mobile network system integrators and telecom wholesalers.
Q15: Does every single transceiver carry a unique serial number linked to its original factory optical test documentation? A: YES. Every HYTOPTODEVICE 25G ER Lite transceiver carries a unique serial number tied to factory optical test records. Buyers can request complete test reports and verification videos for quality audits during bulk procurement projects.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






