| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QDD-400-AOC1M | |
| 2 | Arista Networks | AOC-D-D-400G-1M | |
| 3 | Juniper Networks | QDD-400G-AOC-1M | |
| 4 | NVIDIA/Mellanox | MFA1W00-W001 | |
| 5 | Dell | AOC-Q56DD-400G-1M | |
| 6 | Ruijie Networks | 400G-QDD-AOC1M | |
| 7 | EdgeCore | ET7502-AOC-1M |
| NVIDIA/Mellanox Compatible | MFA1W00-W001 | Vendor Name | HYTOPTODEVICE |
| Connector | QSFP-DD to QSFP-DD | Max Data Rate | 400Gbps |
| Operating Wavelength | 850nm(VSCEL) | Fiber Cable | OM3 MMF |
| Cable Length | 1m (3ft) | Power Consumption | ≤8.0W(Each End) |
| Host Required | FEC | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Modulation Format | PAM4 | DDM/DOM | Support |
| Minimum Bend Radius | 30mm | Protocols | IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA,QSFP-DD-CMIS-rev4p0 |
| Application | 400G-SR8 Ethernet | Warranty | 5 Years |
| Protocols | MSA Compliant, CPRI, eCPRI | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this product from our NVIDIA/Mellanox compatible 400g qsfp-dd active optical cable manufacturer lineup works with mixed-vendor Ethernet hardware. It interoperates smoothly with Cisco, Arista, Juniper, H3C, Dell and other mainstream Ethernet switches, supporting mixed-brand rack stacking and AI Ethernet fabric expansion.







Q1: Can this MFA1W00-W001 compatible 400G QSFP-DD AOC run InfiniBand workloads?
A: No. This HYTOPTODEVICE AOC follows MSA PAM4 specs and is built primarily for Ethernet. It is a great pick for integrators deploying NVIDIA GPU Ethernet clusters.
Q2: Will older NVIDIA switch firmware properly identify this 400G Ethernet AOC?
A: Not always. Legacy firmware may lack CMIS 4.0 support. As an NVIDIA/Mellanox compatible 400g qsfp-dd active optical cable manufacturer, we can adjust EEPROM profiles to improve compatibility and help distributors support clients with existing Ethernet infrastructure.
Q3: What is the maximum reach this OM4 400G QSFP-DD Ethernet AOC can achieve?
A: It supports up to 100m transmission over OM4 multimode fiber. Our factory supplies AOCs in multiple lengths for wholesalers stocking cabling for NVIDIA GPU Ethernet cross-row links.
Q4: How does the latency of this Ethernet 400G AOC compare with 400G twinax DAC cables?
A: This AOC has slightly higher latency of roughly 6–12 ns caused by opto-electrical conversion. This minor delay barely impacts AI Ethernet workloads while delivering longer reach than copper DAC for rack-to-rack Ethernet connections.
Q5: Will electromagnetic interference from nearby GPU power supplies disrupt the 400G Ethernet signal on this AOC?
A: No. Data travels via light over glass fiber instead of copper conductors, so EMI interference is eliminated. This NVIDIA/Mellanox compatible AOC performs reliably in dense GPU racks, a stable option for Ethernet AI data center projects.
Q6: Can on-site engineers pull real-time diagnostic readings from DDM on this NVIDIA Ethernet AOC?
A: Yes. Built-in DDM continuously tracks temperature, voltage and optical parameters. HYTOPTODEVICE 400G QSFP-DD AOC simplifies remote troubleshooting for system integrator field teams managing Ethernet fabrics.
Q7: What per-lane rate does this 400G QSFP-DD Ethernet AOC operate at?
A: Each lane runs 53.125Gbps PAM4. Eight parallel lanes combine to deliver full 400G aggregate bandwidth, ideal for wholesalers sourcing premium Ethernet cluster cabling from our factory.
Q8: For NVIDIA GPU Ethernet fabrics, what benefits make AOC more suitable than copper DAC?
A: AOC supports longer transmission distances with a lighter, slimmer cable body. DAC is limited to ultra-short in-rack runs, so this Ethernet-focused AOC fits cross-rack 400G Ethernet links and is widely selected by distributors for large AI Ethernet deployments.
Q9: Does this Ethernet-specified 400G AOC simplify cable routing inside high-density NVIDIA GPU racks?
A: Yes. Slim and lightweight AOC reduces port strain and improves rack airflow. Bulk orders of our 400G QSFP-DD AOC streamline Ethernet cable layout in packed GPU racks and cut installation labor costs for integrators.
Q10: Why select factory-terminated 400G AOC instead of separate transceivers plus fiber patch cords for NVIDIA Ethernet uplinks?
A: Factory pre-terminated AOC removes the risk of on-site fiber termination defects. HYTOPTODEVICE assembled 400G QSFP-DD AOC speeds up Ethernet uplink deployment, and we arrange fast global shipping for distributors worldwide.
Q11: What minimum bend radius should installers follow when routing this NVIDIA Ethernet 400G QSFP-DD AOC?
A: The minimum bend radius is 30mm. Bending tighter than this threshold creates extra optical loss and hurts long-term Ethernet link stability. We share installation manuals for all wholesalers placing bulk orders.
Q12: How tolerant is the internal fiber to pulling stress during field installation of this Ethernet-only AOC?
A: The internal fiber is sensitive to excessive pulling tension. Technicians should only grip the latch tab and avoid tugging the cable jacket. Our technical team provides deployment guidance for integrators purchasing this wholesale 400G Ethernet AOC.
Q13: What lane architecture is used inside this NVIDIA/Mellanox compatible 400G QSFP-DD Ethernet AOC?
A: It adopts an 8-lane full-duplex structure, with 8 transmit lanes and 8 receive lanes running at 53.125G PAM4 each. This standard design makes it easy for distributors to introduce the AOC to GPU Ethernet cluster buyers.
Q14: Can this QSFP-DD Ethernet AOC plug straight into an OSFP port to build 400G Ethernet connections?
A: No. QSFP-DD and OSFP differ in mechanical dimensions and pin assignments, direct plug-in is not supported. Our sales team can recommend matching adapters for integrators handling mixed-form-factor Ethernet deployments.
Q15: Which CMIS version is implemented on this NVIDIA/Mellanox Ethernet-focused 400G QSFP-DD AOC?
A: This compatible AOC supports CMIS 4.0, optimized for Ethernet management and consistent DDM readout on modern 400G Ethernet switches. It is a competitive selling point for wholesalers serving enterprise Ethernet data center customers.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






