Cisco QDD-400-AOC10M Compatible 400G QSFP-DD to QSFP-DD PAM4 AOC Cable 10m(33ft) Bulk Wholesale | HYTOPTODEVICEProduct Overview
HYTOPTODEVICE provides this Cisco QDD-400-AOC10M compatible 10m 400G QSFP-DD to QSFP-DD PAM4 active optical cable. This direct-attach AOC runs 8×50G PAM4 lanes, supporting both 400G Ethernet and InfiniBand for high-speed AI computing clusters, HPC and cloud data center inter-rack links. Built with OM4 multimode fiber, it delivers stable low-BER links validated for Cisco switching platforms. We offer sample testing, custom EEPROM programming and OEM private label services, supporting bulk wholesale orders with flexible MOQ and fast global delivery. Each cable passes full line-rate burn-in testing before shipment.
Key Technical Specifications
| Cisco Compatible |
QDD-400-AOC10M |
Vendor Name |
HYTOPTODEVICE |
| Connector |
QSFP-DD to QSFP-DD |
Max Data Rate |
400Gbps |
| Operating Wavelength |
850nm(VSCEL) |
Fiber Cable |
OM3 MMF |
| Cable Length |
10m (33ft) |
Power Consumption |
≤8.0W(Each End) |
| Host Required |
FEC |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Modulation Format |
PAM4 |
DDM/DOM |
Support |
| Minimum Bend Radius |
30mm |
Protocols |
IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA,QSFP-DD-CMIS-rev4p0 |
| Application |
400G-SR8 Ethernet |
Warranty |
5 Years |
| Protocols |
MSA Compliant, CPRI, eCPRI |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
- Grip connectors only by latch tab, never pull the cable jacket
- Respect minimum bend radius; prevent sharp bends causing optical loss.
- Keep away from high heat and switch exhaust airflow.
- Maintain clean connector contacts; use proper optical cleaning tools.
- Confirm the correct PAM4 mode (Ethernet or InfiniBand) is enabled on your target device before installation.
- Do not cut or modify the integrated AOC assembly.
- Route loosely; avoid over-tight cable ties.
- Monitor DDM data periodically.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated Cisco Hardware & Firmware
● Cisco 9800 Series 400G QSFP-DD Switches
● Cisco 9600 Series 400G QSFP-DD Switches
● Cisco 8500 Series 400G Fabric Switches
● Cisco 400G QSFP-DD Network Interface Cards
● Cisco DPU servers with 400G ports
● Cisco leaf-spine 400G data center & HPC fabrics
Minimum supported NX-OS firmware version: NX-OS 9.3.5 and above
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this cisco compatible 400g aoc 10m works seamlessly with multi-vendor hardware. It interoperates smoothly with Arista, H3C, Dell, Juniper and other mainstream 400G switches and adapters, supporting mixed-brand rack stacking for AI, HPC and data center fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
● Inter-rack 400G links for hybrid leaf-spine Ethernet and InfiniBand fabrics
● Cross-row 400G interconnection in AI computing, HPC and cloud data centers
● 400G switch-to-switch and switch-to-server high-speed connections
● High-performance storage SAN 400G local interconnection
● Mid-range 400G fabric links for high-density GPU server clusters
● Bulk wholesale supply for distributors, system integrators and HPC contractors
Connectivity Solutions(Applications)
1. 400G to 400G Direct Link for Switch-Switch
2. 400G to 400G Direct Link for Switch-NIC
3. 400G Leaf-Spine Architecture for AI-Ready Data Centers

The Core Feature
1. Drop-in Replacement for 400G QSFP-DD SR8
The integrated AOC replaces discrete SR8 modules — no fiber assembly required, faster deployment for 400G leaf-spine links.

2. High Bandwidth, Low Latency & Low Power
Delivers full 400G bandwidth with minimal signal delay. A power-optimized design reduces thermal load, making it well suited to dense, short-reach rack deployments.

3.Host Validated with Proven Multi-Vendor Interoperability
Full compatibility testing on host equipment, eliminates integration risks for 400G QSFP-DD connections.
4. Full Pre-production Testing for Consistent Quality
Every cable undergoes comprehensive testing before shipment to guarantee stable quality.

FAQS
Q1: Can this 400G QSFP-DD AOC operate normally when plugged into a 200G QSFP-DD port?
A: It lacks auto-negotiation to downgrade to 200G speed. This HYTOPTODEVICE cisco compatible 400g aoc 10m runs at fixed 400G rate, so matching port speed is required for reliable Cisco fabric links.
Q2: Must FEC be turned on to achieve stable 400G QSFP-DD transmission?
A: FEC is strongly recommended to maintain link stability. Our Cisco compatible 400G AOC supports standard FEC modes, correcting minor signal errors for consistent connectivity in AI and HPC deployments.
Q3: Is splitting this 400G QSFP-DD AOC into separate 200G or 100G channels achievable?
A: No, this is a straight-through QSFP-DD to QSFP-DD AOC instead of breakout cable. The HYTOPTODEVICE 400G QSFP-DD AOC carries one independent 400G channel and cannot be split into multiple lower-speed links.
Q4: Does this AOC support interconnection between network gear from different vendors?
A: Yes, cross-vendor connectivity is supported. This cisco compatible 400g aoc 10m follows MSA specifications, enabling stable connections between mixed-brand switches for multi-vendor data center fabrics.
Q5: Do I need special custom port configurations to bring up this 400G QSFP-DD AOC?
A: Only simple speed and protocol setup is required. The HYTOPTODEVICE 400G QSFP-DD AOC delivers plug-and-play performance after basic port configuration, no proprietary tuning needed for Cisco and other mainstream switches.
Q6: What is the power consumption specification for each end of this 400G QSFP-DD AOC?
A: High-performance DSP for 50G PAM4 processing makes most 400G AOCs consume 8W to 10W per end. Our HYTOPTODEVICE Cisco compatible 400G QSFP-DD AOC achieves lower power consumption, below 8W per end, easing thermal pressure for dense GPU clusters.
Q7: What BER performance can purchasers expect from this 400G QSFP-DD AOC?
A: We guarantee BER ≤1e-15 under standard operating conditions. Each HYTOPTODEVICE 400G QSFP-DD AOC undergoes strict factory testing to meet this low BER standard for lossless high-speed data transfer.
Q8: What fiber type is integrated inside this 10m Cisco 400G QSFP-DD AOC assembly?
A: OM4 multimode fiber is adopted inside this 10m 400G QSFP-DD AOC. OM4 fiber delivers stable PAM4 signal transmission and fits the distance requirements of cross-rack links in Cisco-powered AI data centers.
Q9: Will long-term heat exposure accelerate degradation of the internal VCSEL lasers?
A: Operation within 0–70°C will not cause rapid laser degradation. HYTOPTODEVICE AOCs use premium VCSEL components, yet prolonged overheating will shorten the service life of your 400G QSFP-DD AOC.
Q10: Will signal performance degrade significantly at the maximum transmission distance of this AOC?
A: Slight optical attenuation occurs but stays within acceptable thresholds. Our cisco compatible 400g aoc 10m preserves qualified signal quality across the full supported length range for data center cross-row connections.
Q11: What benefits does an AOC have compared with discrete transceivers plus fiber patch cords?
A: AOC simplifies deployment and reduces potential failure points. The factory-terminated HYTOPTODEVICE 400G QSFP-DD AOC removes manual fiber termination work, cutting installation time for wholesale data center projects.
Q12: Can I swap only one defective connector end without replacing the whole cable?
A: No, the AOC is a fully integrated factory assembly. If one connector end fails, the entire cable needs replacement. We provide reliable warranty coverage for this 10m Cisco QDD-400-AOC10M compatible AOC for bulk buyers.
Q13: Is AOC a better cabling option for inter-rack connections than separate optical transceivers?
A: Yes, AOC works better for inter-rack cabling scenarios. This slim HYTOPTODEVICE 400G QSFP-DD AOC is lightweight and easier to route than separate transceiver plus patch cord sets for dense rack layouts.
Q14: What minimum bend radius should installers follow during cable routing?
A: The minimum bend radius is 30mm. Please comply with this requirement during routing; sharp bending will damage internal fiber and break 400G transmission on your Cisco compatible QSFP-DD AOC.
Q15: How resistant is the internal fiber to pulling tension during rack installation work?
A: The internal fiber is susceptible to excessive pulling force. Installers should hold the connector latch instead of tugging the cable jacket to protect this HYTOPTODEVICE 400G QSFP-DD AOC from hidden fiber damage.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Application and Manufacturing Process

