Cisco QDD-400-AOC5M Compatible 400G QSFP-DD to QSFP-DD PAM4 AOC Cable 5m(16ft) Bulk Wholesale | HYTOPTODEVICEProduct Overview
HYTOPTODEVICE provides this Cisco QDD-400-AOC5M compatible 5m 400G QSFP-DD to QSFP-DD PAM4 active optical cable. This direct-attach AOC adopts 8×50G PAM4 lanes, supporting both 400G Ethernet and InfiniBand for HPC, AI cluster and cloud data center interconnection. Built with OM4 multimode fiber, it delivers stable low-BER links for Cisco compatible switching platforms. We offer sample testing, custom EEPROM programming and OEM private label service, supporting bulk wholesale orders with flexible MOQ and fast global delivery. Every cable passes full line-rate burn-in testing before shipment.
Key Technical Specifications
| Cisco Compatible |
QDD-400-AOC5M |
Vendor Name |
HYTOPTODEVICE |
| Connector |
QSFP-DD to QSFP-DD |
Max Data Rate |
400Gbps |
| Operating Wavelength |
850nm(VSCEL) |
Fiber Cable |
OM3 MMF |
| Cable Length |
5m (16ft) |
Power Consumption |
≤8.0W(Each End) |
| Host Required |
FEC |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Modulation Format |
PAM4 |
DDM/DOM |
Support |
| Minimum Bend Radius |
30mm |
Protocols |
IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA,QSFP-DD-CMIS-rev4p0 |
| Application |
400G-SR8 Ethernet |
Warranty |
5 Years |
| Protocols |
MSA Compliant, CPRI, eCPRI |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
- Grip connectors only by latch tab, never pull the cable jacket
- Respect minimum bend radius; prevent sharp bends causing optical loss.
- Keep away from high heat and switch exhaust airflow.
- Maintain clean connector contacts; use proper optical cleaning tools.
- Confirm the correct PAM4 mode (Ethernet or InfiniBand) is enabled on your target device before installation.
- Do not cut or modify the integrated AOC assembly.
- Route loosely; avoid over-tight cable ties.
- Monitor DDM data periodically.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated Cisco Hardware & Firmware
● Cisco 400G switches with QSFP-DD ports
● Cisco QSFP-DD based leaf-spine fabric platforms
● Servers fitted with Cisco 400G QSFP-DD network adapters
● Cisco data center fabric modules
● HPC and AI computing switching systems
● Hybrid Ethernet / InfiniBand 400G cluster fabrics
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this cisco compatible 400g qsfp-dd aoc cable works seamlessly with multi-vendor hardware. It interoperates smoothly with Arista, H3C, Dell, Juniper and other mainstream 400G switches and adapters, supporting mixed-brand rack stacking for AI, HPC and data center fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
● Inter-rack 400G links for hybrid leaf-spine Ethernet and InfiniBand fabrics
● Row-to-row 400G interconnection in AI computing, HPC and cloud data centers
● 400G switch-to-switch and switch-to-server high-speed connections
● High-performance storage SAN 400G local interconnection
● Short-range 400G fabric links for high-density GPU server clusters
● Bulk wholesale supply for distributors, system integrators and HPC contractors
Connectivity Solutions(Applications)
1. 400G to 400G Direct Link for Switch-Switch
2. 400G to 400G Direct Link for Switch-NIC
3. 400G Leaf-Spine Architecture for AI-Ready Data Centers

The Core Feature
1. Drop-in Replacement for 400G QSFP-DD SR8
The integrated AOC replaces discrete SR8 modules — no fiber assembly required, faster deployment for 400G leaf-spine links.

2. High Bandwidth, Low Latency & Low Power
Delivers full 400G bandwidth with minimal signal delay. A power-optimized design reduces thermal load, making it well suited to dense, short-reach rack deployments.

3.Host Validated with Proven Multi-Vendor Interoperability
Full compatibility testing on host equipment, eliminates integration risks for 400G QSFP-DD connections.
4. Full Pre-production Testing for Consistent Quality
Every cable undergoes comprehensive testing before shipment to guarantee stable quality.

FAQS
Q1: Can I plug a 400G QSFP-DD AOC into a 200G QSFP-DD port?
A: It is not supported for auto-negotiation downshift. This HYTOPTODEVICE Cisco compatible 400G QSFP-DD AOC runs at fixed 400G rate and cannot adapt to 200G port operation, so it is recommended to match the port speed for stable data center links.
Q2: Is Forward Error Correction (FEC) required for 400G QSFP-DD links?
A: FEC is strongly recommended for reliable transmission. Our 400G QSFP-DD AOC supports standard FEC modes, which helps correct minor signal errors and maintain stable connectivity for Cisco HPC and cloud fabric deployment.
Q3: Can I break down a 400G QSFP-DD AOC into two 200G or four 100G links?
A: No, this is a straight-through dual QSFP-DD AOC instead of breakout cable. The HYTOPTODEVICE 400G QSFP-DD AOC delivers one single 400G channel and cannot be split into multiple lower-speed independent links.
Q4: Can I connect two switches from different brands (e.g., Cisco to NVIDIA/Mellanox)?
A: Yes, it supports cross-brand interconnection. Our cisco compatible 400g qsfp-dd aoc cable follows MSA standards, enabling reliable connectivity between mixed-vendor switches for multi-brand data center fabric builds.
Q5: Does a 400G QSFP-DD AOC require special port configuration on the switch?
A: Only basic speed and protocol setup is needed. The HYTOPTODEVICE 400G QSFP-DD AOC is plug-and-play after simple port configuration, no extra proprietary tuning required for Cisco, Arista or other mainstream switches.
Q6: What is the typical power consumption of a 400G QSFP-DD AOC?
A: Total power consumption stays below 12W. This low-power design of our Cisco QDD-400-AOC5M compatible AOC reduces heat load, ideal for high-density GPU racks and long-running HPC cluster environments.
Q7: What Bit Error Rate (BER) performance is guaranteed?
A: We guarantee BER ≤1e-15 under normal operating conditions. Every HYTOPTODEVICE 400G QSFP-DD AOC passes strict factory testing to meet this low BER requirement for lossless high-speed transmission.
Q8: What fiber type is used inside the cable assembly?
A: OM4 multimode fiber is adopted inside this 5m 400G QSFP-DD AOC. OM4 fiber supports stable PAM4 signal delivery and fits the transmission distance needs of inter-rack links in enterprise and AI data centers.
Q9: Does heat affect internal VCSEL optical lasers over time?
A: Moderate operating temperature within 0–70°C will not cause rapid laser degradation. HYTOPTODEVICE AOCs use quality VCSEL components, but continuous overheating will shorten service life of your 400G QSFP-DD AOC.
Q10: Is there signal degradation at maximum cable length (100m vs 3m)?
A: Slight optical attenuation exists but stays within acceptable specs. Our Cisco compatible 400G QSFP-DD AOC maintains valid signal quality across the full supported length range for data center inter-row connections.
Q11: Why choose an AOC over discrete 400G Transceivers (e.g., 400G SR8) and optical patch cables?
A: AOC brings simpler deployment and lower failure risk. The factory-terminated HYTOPTODEVICE 400G QSFP-DD AOC removes manual fiber splicing, saving installation time for wholesale data center projects.
Q12: Can I replace just one connector end if it fails?
A: No, the AOC is an integrated factory assembly. If one connector end fails, the whole cable needs replacement. We provide quality warranty for this 5m Cisco QDD-400-AOC5M compatible AOC for bulk buyers.
Q13: Is an AOC better suited for inter-rack links than transceivers?
A: Yes, AOC is more suitable for inter-rack runs. This slim HYTOPTODEVICE 400G QSFP-DD AOC is lighter and easier to route than separate transceiver plus patch cord sets for dense rack cabling.
Q14: What is the minimum bend radius for a 400G QSFP-DD AOC?
A: The minimum bend radius is 30mm. Please follow this rule during cable routing, sharp bending will create fiber damage and interrupt 400G transmission on your Cisco compatible QSFP-DD AOC.
Q15: How sensitive is the internal optical fiber to pulling force during installation?
A: The internal fiber is sensitive to excessive pulling force. Installers should hold the connector latch instead of tugging the cable body to protect this HYTOPTODEVICE 400G QSFP-DD AOC from hidden fiber damage.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Application and Manufacturing Process

