| NO. | Item | Specification |
| 1 | Speed | 200G |
| 2 | Wavelength | 1271,1291,1311,1331nm |
| 3 | Max Distance | 2km |
| 4 | Connector | Duplex LC |
| 5 | Fiber Type | Single-Mode Fiber (SMF) |
| NVIDIA Mellanox Compatible |
MMS1W50-HM |
Vendor Name | HYTOPTODEVICE |
| Form Factor | QSFP56(Hot-Pluggable) | Max Data Rate | 200Gbps (4x50Gbps) |
| Wavelength | 1271nm, 1291nm, 1311nm and 1331nm
|
Max Distance | 2km |
| Modulation Format | PAM4 | Host Required | FEC |
| Connector | Duplex LC | Voltage Supply | 3.3V |
| Cable Type | SMF | DDM Support | Yes |
| Transmitter Type | EML CWDM4 | Receiver Type | PIN |
| TX Power | -4.2~+4.7dBm | Receiver Sensitivity | < -8.2dBm |
| Operation Temperature | 0 to 70°C (32 to 158°F) | Maximum Power | < 6.5W |
| Protocols | IEEE 802.3bs, QSFP56 MSA, SFF-8665, SFF-8636 | Application | 200G InfiniBand HDR, |
This 200G FR4 QSFP56 transceiver is designed for medium-long reach single-mode interconnections inside distributed HPC and AI data centers.
Cable Requirements: OS2 single-mode fiber with duplex LC/UPC termination is required to achieve full 2km reach.
Thermal Tips: Avoid dense adjacent port population without proper airflow to prevent thermal throttling.
Hot-Swap Support: Compliant with QSFP56 MSA standards for online module replacement.
Monitoring: Use switch command lines to track DDM temperature, Tx power and Rx power regularly.
Application Reminder: This FR4 single-mode module supports cross-rack and inter-pod links. Select SR4 multimode QSFP56 modules for intra-rack short connections within 100m.
Full Compatibility List & Supported Network Hardware
On-Site Recoding Solutions: Gain full control with our optional smart coding boards and software, enabling your team to rewrite EEPROM compatibility codes on demand.
Free Lifetime Firmware Maintenance: Enjoy complimentary firmware update downloads whenever switch OS versions upgrade or new hardware platforms are released.
Custom Code Adaptation: Need support for specialized or legacy network systems? Our engineers offer free custom firmware tailoring to guarantee 100% link-up.
Q1: What is the difference between QSFP56 and QSFP28 form factors?A1: While both share the same physical dimensions, the QSFP56 form factor utilized by the QSFP-200G-FR4-S uses 50G PAM4 modulation per lane (4x 50G), enabling a total bandwidth of 200G. In contrast, QSFP28 relies on older NRZ (Non-Return-to-Zero) modulation at 25G per lane (4x 25G) to deliver 100G total bandwidth.
Q2: Does this module support a breakout configuration into multiple 50G links? A2: No. Because the FR4 transceiver uses Coarse Wavelength Division Multiplexing (CWDM4) to combine all four lanes inside a single duplex LC fiber connector, you cannot physically separate the wavelengths into distinct 50G or 100G independent ports.
Q3:Is a Host Forward Error Correction (FEC) configuration required? A3: Yes. To achieve error-free performance up to 2 km at 200G speeds, the host system must have KP4 FEC (RS-FEC) enabled on the switch ports. In EOS, configuring the port to speed 200g-4 typically initializes this automatically.
Q4: Can I plug this QSFP56 module into an Arista 400G QSFP-DD port? A4: Yes. Arista QSFP-DD ports are physically backward compatible with QSFP56 and QSFP28 form factors. The module will fit safely and operate at 200G, provided the speed command for that slot is set explicitly to 200g-4 in Arista EOS.
Q5: Is the Arista QSFP-200G-FR4 compatible with third-party, non-Arista switches? A5: This specific Arista OEM module contains Arista-specific EEPROM coding. If plugged into a non-Arista switch that strictly enforces vendor locking, the host switch may flag it as unauthorized. For mixed-vendor environments, custom-coded compatible optics are typically recommended.
Q6: What is the power budget advantage of the Arista QSFP-200G-FR4? A6: The module features a highly optimized internal architecture, keeping maximum power dissipation under 5.5 Watts. This is significantly lower than the standard 7.0W ceiling of the QSFP56 specification, reducing datacenter cooling overhead.
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany
Quality Certification & Compliance:
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






