• HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable 0.5m
  • 0.5m  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
  • 400G QSFP-DD DAC twinax cable HYTOPTODEVICE
  • 400G QSFP-DD passive direct attach copper cable from hytoptodevice
  • HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable 0.5m
  • 0.5m  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
  • 400G QSFP-DD DAC twinax cable HYTOPTODEVICE
  • 400G QSFP-DD passive direct attach copper cable from hytoptodevice

NVIDIA/Mellanox MCP1660-W00AE30 Compatible 400G QSFP-DD to QSFP-DD Ethernet Passive Direct Attach Copper Twinax Cable 0.5m(1.67ft)PAM4 | HYTOPTODEVICE

HYTOPTODEVICE supplies Ethernet passive direct attach copper twinax cable, NVIDIA/Mellanox MCP1660-W00AE30 compatible 0.5m 400G QSFP-DD DAC twinax cable, bulk wholesale, pre-coded for Mellanox Ethernet adapters and switches, low latency for 400G Ethernet intra-rack AI data center short jumpers.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QDD-400-CU0.5M
2 Arista Networks CAB-D-D-400G-0.5
3 Dell  DAC-Q56DD-400G-0.5M 
4 NVIDIA/Mellanox  MCP1660-W00AE30
5 H3C QSFPDD-400G-D-CAB-0.5M
6 Generic QSFPDD-400G-CUxM
Description

NVIDIA/Mellanox MCP1660-W00AE30 Compatible 400G QSFP-DD to QSFP-DD  Ethernet Passive Direct Attach Copper Twinax Cable 0.5m(1.67ft)PAM4 | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE’s 0.5m 400G QSFP-DD to QSFP-DD Ethernet passive direct attach copper twinax cable is fully compatible with NVIDIA/Mellanox MCP1660-W00AE30. Built to IEEE 802.3ck and SFF-8636 standards, this zero-power PAM4 passive direct attach copper twinax cable is optimized exclusively for **Ethernet** applications, adopting 30AWG controlled-impedance copper conductors to support stable 400Gbps Ethernet transmission over 8×50G PAM4 lanes. Factory pre-programmed with Mellanox Ethernet-specific EEPROM, it delivers plug-and-play performance on NVIDIA Mellanox QSFP-DD Ethernet switches and ConnectX series adapters. Every cable undergoes rigorous signal integrity testing covering insertion loss, return loss and crosstalk. Ideal for ultra-short 0.5m intra-rack jumpers inside dense AI racks, stacked switch links, server-to-leaf switch Ethernet connections and 400G Ethernet fabric upgrades. HYTOPTODEVICE provides bulk wholesale, custom EEPROM programming and flexible MOQ for this Ethernet passive direct attach copper twinax cable.

Key Technical Specifications

NVIDIA/Mellanox Compatible
 MCP1660-W00AE30
Vendor Name HYTOPTODEVICE
Connector QSFP-DD to QSFP-DD Max Data Rate 400Gbps
Cable Length 0.5m (1.67ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.25W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols IEEE 802.3cd, QSFP-DD MSA, CMIS 4.0
Minimum Bend Radius 35mm Application 400G Ethernet and InfiniBand EDR

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Setting: Host QSFP-DD port must enable 400GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.

  • Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.sharp bends degrade 400G PAM4 signals and trigger link errors.

  • Port Installation Standard: Works only with standard QSFP-DD 400G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.

  • Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated NVIDIA/Mellanox Hardware & Firmware

  • NVIDIA Mellanox SN4700, SN4800 400G Ethernet leaf-spine switches
  • NVIDIA Mellanox SN5400 high-density QSFP-DD Ethernet switches
  • NVIDIA ConnectX-7, ConnectX-8 QSFP-DD 400G Ethernet NIC adapters
  • NVIDIA DGX A100, DGX H100, DGX GH200 AI server QSFP-DD Ethernet ports
  • MLNX-OS 3.9, 3.10, 3.11 and newer Ethernet firmware releases
  • NVIDIA Cumulus Linux, ONYX network operating system compatible

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 400G QSFP-DD passive direct attach copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 

• Ultra-short 0.5m intra-rack server to NVIDIA/Mellanox leaf switch interconnection
• Dense AI computing rack 400G high-speed fabric cabling
• Stacked 400G switch short jumper links
• Data center 400G leaf-spine network upgrade and expansion
• Bulk procurement for system integrators and data center distributors
• Lab POC testing for 400G PAM4 QSFP-DD passive links


Connectivity Solutions(Applications) 

1. 400G to 400G Direct Link for Switch-Switch
hytoptodevice bulk 400G short-reach DAC twinax cable for switch to swith link


2. 400G to 400G Direct Link for Switch-NIC
hytoptodevice 400G QSFP-DD to QSFP-DD copper twinax cable for data center,hpc


3. 400G Data Center Networking Solution for HPC

hytoptodevice 400G QSFP-DD DAC cable for 400G data center


The Core Feature

1.Two Parts Out. One Cable In.

The 400G passive DAC cable runs on a single twinax copper link, replacing the fiber pair and two transceivers — plug-and-play 400G for short-reach runs, nothing more to install.

hytoptodevie third-party compatible 400G QSFP-DD passive twinax cable

2. Zero Power Draw. Zero Added Heat.

No power. No heat. No compromise. The 400G QSFP-DD passive DAC cable keeps dense racks cool while sustaining a low-latency 400G link for in-rack and adjacent-rack connections.

400G QSFP-DD to QSFP-DD passive direct attach copper twinax cable for data center switch

3.Verified on Your Host. Ready on Arrival

Every 400G passive DAC twinax cable is matched and validated against the exact switch it will plug into — checked, then shipped. Deploy with zero guesswork: no link flaps, no port lockouts, no compatibility surprises. Unsure it matches your setup? Send us your switch model — we'll confirm compatibility before you order. Compatibility Video available upon request.

hytoptodevice wholesale 400G QSFP-DD passive attach copper twinax cable for data center

4. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  QSFP-DD  to QSFP-DD 400g direct attach copper cable for switches

FAQ

Q1: Can this Mellanox-compatible 400G QSFP-DD DAC run stable Ethernet links on multi-brand Ethernet switches? A1: It depends on EEPROM coding. HYTOPTODEVICE passive direct attach copper twinax cable supports single-vendor or dual-vendor programming. With matched Ethernet coding, it achieves plug-and-play connectivity on NVIDIA Mellanox and other MSA-compliant QSFP-DD Ethernet switches.

Q2: Is a QSFP-DD cable backward compatible with older QSFP28 (100G) or QSFP56 (200G) ports? A2: Physically, QSFP-DD ports are designed to accept older QSFP28 or QSFP56 modules with certain physical and software limitations. However, this 400G QSFP-DD DAC cannot operate when inserted into legacy 100G/200G ports because of mismatched form factor and electrical lane definition.

Q3: Will using third-party 400G Ethernet DAC twinax cables void my NVIDIA network hardware warranty? A3: It will not automatically void your switch or NIC warranty. Our HYTOPTODEVICE passive direct attach copper twinax cable follows MSA and IEEE 802.3ck Ethernet standards. Vendors only reject warranty claims when cable defects directly cause permanent port damage.

Q4: Can I connect different brands of network interface cards (NICs) on each end of the cable? A4: Yes, provided each end is correctly coded or compatible with the respective hardware requirements of the connected servers or switches. HYTOPTODEVICE offers dual-sided custom EEPROM coding service to support mixed-brand NIC interconnection for bulk deployments.

Q5: Does this 400G QSFP-DD copper twinax cable support standard Ethernet auto-negotiation functions? A5: Yes. This HYTOPTODEVICE passive direct attach copper twinax cable supports IEEE Ethernet auto-negotiation. The negotiation function is handled by the switch/NIC firmware, not the passive cable itself.

Q6: What is the maximum reliable operating length for our passive 400G QSFP-DD Ethernet copper twinax cable? A6: Our maximum supported length for passive 400G QSFP-DD copper twinax is 3 meters. HYTOPTODEVICE supplies 0.5m, 1m, 2m and 3m variants; passive copper cannot maintain 400G PAM4 Ethernet signal integrity beyond 3m.

Q7: How does latency compare between 400G Ethernet DAC copper twinax and fiber optic Ethernet links? A7: 400G DAC copper latency is lower than fiber. Light travels slower in glass than electrical signals in copper, and DAC removes transceiver chip delay. HYTOPTODEVICE passive direct attach copper twinax cable delivers ultra-low latency ideal for AI cluster Ethernet workloads.

Q8: What wire gauge (AWG) is typically used in 400G QSFP-DD cables? A8: Short lengths including 0.5m and 1m use 30AWG for better flexibility. 2m and 3m versions adopt 28AWG to minimize signal attenuation. HYTOPTODEVICE matches the proper AWG for every length to stabilize 400G PAM4 signal transmission.

Q9: Can this 400G Ethernet DAC sustain continuous full line-rate Ethernet traffic without packet loss? A9: Yes, within rated length and proper operating conditions. Every HYTOPTODEVICE passive direct attach copper twinax cable passes line-rate Ethernet burn-in testing, supporting continuous 400G line-rate traffic with zero packet loss.

Q10: Can this Mellanox QSFP-DD DAC work for InfiniBand NDR, or is it built only for Ethernet? A10: This specific MCP1660-W00AE30 variant is pre-coded for Ethernet only. Our HYTOPTODEVICE 400G QSFP-DD DAC can be coded for Ethernet or InfiniBand NDR separately; please specify your required mode when placing bulk orders.

Q11: What latch design is fitted on the QSFP-DD connectors of these Ethernet twinax cables? A11: They use standard bail-clasp pull-tab latches. This is the mainstream design for HYTOPTODEVICE QSFP-DD cables, allowing easy, tool-free insertion and removal without damaging Ethernet ports or connectors.

Q12: Is this 400G Ethernet DAC suitable for inter-rack cabling across separate server racks in AI data centers? A12: Not recommended for most cross-rack deployments. Our passive 400G twinax max reach is 3m, which is only suitable for adjacent racks. Longer cross-rack Ethernet links require 400G AOC fiber cables instead.

Q13: Are custom jacket color options available for bulk orders of this Mellanox 400G Ethernet DAC cable? A13: Standard jacket color is black. HYTOPTODEVICE also supports custom jacket colors for bulk OEM orders, you can submit color requirements together with your Ethernet EEPROM coding request before production.

Q14: What troubleshooting steps apply when this 400G Ethernet DAC fails to bring up a link after plugging in? A14: The link will not establish and the switch may log Ethernet link-down errors. Check proper seating, verify EEPROM coding matches your Ethernet hardware, and inspect for over-bending. HYTOPTODEVICE technical team helps troubleshoot link-up issues.

Q15: Why is the cost of 400G Ethernet DAC twinax cables much lower than 400G Ethernet optical transceivers? A15: Passive DAC has no optical chips, lasers or photodiodes. HYTOPTODEVICE passive direct attach copper twinax cable uses only copper and shielding materials, cutting component cost compared to optical transceiver modules.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable 0.5m
  • 0.5m  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
  • 400G QSFP-DD DAC twinax cable HYTOPTODEVICE
  • 400G QSFP-DD passive direct attach copper cable from hytoptodevice
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download