| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | Q56-200-CU50CM | |
| 2 | Arista Networks | CAB-Q56-Q56-0.5M | |
| 3 | Dell | DAC-Q56-200G-0.5M | |
| 4 | NVIDIA/Mellanox | MCP1650-V00AE30 | |
| 5 | Generic | QSFP56-200G-CUxM |
| NVIDIA/Mellanox Ethernet Compatible |
MCP1650-V00AE30
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP56 to QSFP56 | Max Data Rate | 200Gbps |
| Cable Length | 0.5m (1.67ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE802.3cd, SFF-8436 |
| Minimum Bend Radius | 35mm | Application | 200G Ethernet and InfiniBand HDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP56 port must enable 200GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard QSFP56 200G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 200G QSFP56 passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: Can this NVIDIA compatible 200G QSFP56 DAC work across different brands of network switches? A1: This straight 200G QSFP56 DAC works on MSA-compliant QSFP56 ports of Cisco, Arista and Juniper switches. HYTOPTODEVICE pre-writes NVIDIA matched EEPROM, delivering reliable cross-brand interoperability for multi-vendor AI fabrics.
Q2: Can this 200G QSFP56 copper cable run on older 100G QSFP28 switch ports? A2: It is not natively backward compatible. QSFP56 adopts 50G PAM4 per lane while QSFP+/QSFP28 use NRZ signaling with different electrical pinout. Port rate adaptation is only available if your switch hardware supports this function.
Q3: Will installing third-party 200G DAC cables void my NVIDIA network hardware warranty? A3: Properly qualified third-party DAC cables generally do not void OEM hardware warranty. All HYTOPTODEVICE 200G QSFP56 twinax cables follow MSA standards and pass strict signal tests to lower compatibility risks for NVIDIA AI deployments.
Q4: Does this MCP1650-V00AE30 replacement DAC support DDM diagnostic readouts? A4: Yes, this NVIDIA compatible 200G QSFP56 DAC supports standard DDM/DOM readout. The pre-programmed EEPROM reserves DDM registers, letting you view link status directly on NVIDIA Spectrum switches and ConnectX adapters.
Q5: Are these NVIDIA 200G twinax DAC cables compliant with global data center cabling standards? A5: Yes, our 200G QSFP56 passive copper twinax cables comply with MSA, IEEE 802.3cd, RoHS and REACH. HYTOPTODEVICE runs batch verification to satisfy global data center and AI cluster cabling requirements.
Q6: What signal modulation scheme is used inside a 200G QSFP56 passive DAC cable? A6: It adopts PAM4 4-level pulse amplitude modulation. This HYTOPTODEVICE 200GBASE-CR4 cable aggregates four 50G PAM4 lanes to reach 200Gbps, delivering higher bandwidth density than traditional NRZ signaling.
Q7: What is the maximum reliable reach for passive 200GBASE-CR4 twinax copper cables? A7: The reliable maximum length for passive 200GBASE-CR4 twinax is 3 meters. PAM4 has tighter signal margin, we supply 0.5m, 1m, 1.5m, 2m and 3m standard lengths for in-rack NVIDIA AI and HPC connections.
Q8: Why is passive 200G DAC better than fiber links for low-latency GPU rack connections? A8: 200G passive DAC has lower latency than fiber. Copper twinax removes optical conversion delay, making this HYTOPTODEVICE 200G QSFP56 cable ideal for low-latency AI training and high-frequency computing workloads.
Q9: Which AWG wire sizes are commonly selected for 200G QSFP56 twinax copper cables? A9: 30AWG and 26AWG are common for 200G twinax. This 0.5m NVIDIA compatible DAC uses 30AWG for superior flexibility; 26AWG is used for longer passive runs up to 3m with less signal attenuation.
Q10: Will this 0.5m NVIDIA 200G DAC stay stable under continuous full line-rate transmission? A10: Yes, it supports sustained line-rate 200G traffic without packet loss. Every HYTOPTODEVICE 200G QSFP56 DAC undergoes eye diagram testing to guarantee signal integrity under full load.
Q11: How does the bending tolerance of 200G PAM4 twinax compare with conventional 100G NRZ DAC cables? A11: 200G PAM4 twinax is slightly less tolerant of sharp bends than 100G NRZ DAC. Our 30AWG 200G cable still offers good flexibility for dense GPU racks, but must follow the 35.5mm minimum bend radius rule.
Q12: What connector pull-tab design is fitted on these QSFP56 200G DAC cables? A12: These QSFP56 connectors adopt standard pull-tab latching design. The pull tab on this HYTOPTODEVICE 200G DAC enables easy, safe hot swap without damaging NVIDIA switch or NIC ports during cabling maintenance.
Q13: Can I deploy this short 0.5m 200G twinax cable for inter-rack cabling? A13: No, this 0.5m short passive twinax is designed only for in-rack links. It cannot reach across separate racks; select active optical cables (AOC) if you need inter-rack 200G connections.
Q14: Can I customize the outer jacket color for bulk orders of this NVIDIA 200G DAC? A14: Black LSZH jacket is our standard for this MCP1650-V00AE30 compatible DAC. HYTOPTODEVICE supports custom jacket color requests for bulk orders and OEM projects.
Q15: What warranty coverage is offered for these 200G QSFP56 passive copper twinax cables? A15: This 200G QSFP56 passive copper twinax cable carries our standard multi-year product warranty. HYTOPTODEVICE provides responsive RMA support for wholesale buyers and AI system integrators.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




