NVIDIA/Mellanox MC3309130-00A Compatible 10G SFP+ DAC Cable 50cm | 10GBASE-CU Passive Copper Twinax Cable HYTOPTODEVICE
Product Overview
HYTOPTODEVICE NVIDIA/Mellanox MC3309130-00A compatible 10G SFP+ passive twinax DAC cable is a direct drop-in replacement for original Mellanox 0.5m 10G copper DAC. It complies with SFF-8431 and 10GBASE-CU MSA standards. As a trusted factory and supplier, we manufacture this cable for stable ultra-low-latency 10Gbps transmission, well suited for HPC, GPU cluster short server uplink and intra-rack connections.
It comes pre-programmed with Mellanox EEPROM signature for plug-and-play operation and avoids firmware transceiver warning alerts on ConnectX adapters. HYTOPTODEVICE factory supports bulk supply, sample testing and OEM private label for high-performance computing and data center integration projects.
Key Technical Specifications
| NVIDIA/Mellanox Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
0.5m (1.6ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
20mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target Cisco hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated HPE Hardware & Firmware
This 10G SFP+ passive dac cable is preloaded with Mellanox EEPROM data, supports alarm-free plug-and-play on NVIDIA/Mellanox network hardware. Every cable passes target device testing before leaving our factory:
• Mellanox ConnectX-3, ConnectX-4, ConnectX-5 10G server adapters
• NVIDIA SN2100, SN2410 Ethernet switch platforms
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this SFP+ DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• Mellanox ConnectX NIC to ToR switch low latency 10G uplink
• HPC & GPU cluster intra-rack server interconnection
• Virtualization cluster and storage fabric interconnection
• Cost-effective short 10G links replacing fiber patch cords
• Bulk inventory sourcing for HPC integrators and data center contractors
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the 10G SFP+ DAC Cable replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive 10g SFP+ DAC cable draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Can this factory-manufactured Mellanox compatible 10G SFP+ DAC run with ConnectX adapters and other vendor switches?
A: Yes, it supports cross-vendor 10GBASE-CU SFP+ ports. HYTOPTODEVICE manufacturer pre-codes EEPROM and validates on target hardware. Test samples first for locked firmware.
Q2: Is it possible to rewrite the cable EEPROM ID when upgrading our Mellanox HPC cluster hardware?
A: Yes, EEPROM reprogramming service is available. HYTOPTODEVICE factory supplies optional coding tools and free lifetime technical support for signature modification.
Q3: How does conductor AWG specification impact signal integrity for factory built Mellanox 10G stacking DAC?
A: AWG defines copper conductor thickness. This 50cm Mellanox compatible DAC uses 30AWG. Thin gauge brings great flexibility for tight HPC rack routing, thicker 24AWG reduces attenuation for longer DAC runs.
Q4: What bending rule must we follow when deploying this Mellanox 10G SFP+ twinax DAC?
A: Follow the 20mm minimum bend radius. The standard minimum bend radius is typically 5 times the outer cable diameter. Bending lower than this can deform the internal twinax structure and cause bit errors.
Q5: What power saving benefits can we get by selecting factory passive 10G SFP+ DAC instead of active DAC for GPU racks?
A: Passive DAC draws far less power than amplified active DAC. Our factory passive 10G DAC consumes under 0.1W. It helps reduce total power consumption for densely packed Mellanox HPC racks.
Q6: Why pick factory direct Mellanox twinax DAC rather than AOC for short HPC server uplink?
A: Passive DAC delivers lower latency and better pricing for links under 7 meters. HYTOPTODEVICE factory twinax DAC has no optical chips, ideal for fixed short-distance GPU cluster uplink.
Q7: Between factory wholesale 10G SFP+ DAC and Cat6a 10GBASE-T, which reduces thermal load inside HPC cabinets?
A: Passive DAC generates much less heat. 10GBASE-T PHY chips continuously dissipate heat. This factory-produced DAC has no powered components to ease rack thermal pressure.
Q8: Will bulk supplied Mellanox compatible 10G SFP+ DAC introduce EMI noise beside GPU and NIC cards?
A: Our fully shielded twinax design keeps EMI low. HYTOPTODEVICE factory DAC meets industry EMC standards. Shielding blocks crosstalk among closely arranged HPC adapters.
Q9: What typical triggers unstable links and rising CRC counters on factory Mellanox 10G DAC connections?
A: Damaged conductors or contaminated contact pins are the top triggers. Our factory 100% inspection filters defective units. Sharp bends and mismatched port speed also lead to link flapping.
Q10: Is FEC configuration required to maintain stable 10GBASE-CU links for this Mellanox compatible DAC?
A: FEC is not required for passive 10GBASE-CU DAC. FEC is designed for long-reach optical links. Disable FEC to avoid extra processing overhead on Mellanox ConnectX ports.
Q11: Will continuous high operating temperature shorten the usable service life of factory bulk 10G SFP+ DAC twinax cables?
A: Yes, sustained high cabinet heat accelerates jacket and copper aging. HYTOPTODEVICE factory DACs pass thermal cycle testing. It supports reliable 24/7 operation inside warm HPC racks.
Q12: What practical differences between PVC and LSZH jacket choices for factory bulk Mellanox DAC procurement?
A: PVC suits regular indoor HPC racks with lower manufacturing cost. LSZH releases minimal smoke and zero halogens in fire. HYTOPTODEVICE factory offers both jacket choices for bulk DAC orders.
Q13: Does frequent hot swapping gradually wear the gold contacts of factory Mellanox compatible 10G SFP+ DAC?
A: Repeated plugging slowly wears gold plating on contact surfaces. HYTOPTODEVICE factory DAC uses premium gold-plated contacts. It extends plug cycles for regular HPC fabric reconfiguration.
Q14: Can this factory Mellanox 10G SFP+ DAC be inserted into a 25G SFP28 uplink port?
A: It may negotiate down to 10G speed. Final behavior depends on adapter firmware. Complete sample verification before large-scale SFP28 uplink deployment.
Q15: Can this factory supply 10G Mellanox DAC work with breakout adapters installed on 40G QSFP+ ports?
A: Native 40G transmission is not supported. This DAC only carries 10G signal. Confirm breakout adapter and hardware compatibility with the HYTOPTODEVICE factory technical team in advance.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

