| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-4SFP10G-CU50CM | |
| 2 | Arista Networks | CAB-Q-S-0.5M | |
| 3 | Juniper | QFX-QSFP-DACBO-50CM | |
| 4 | Brocade | 40G-QSFP-4SFP-C-0105 | |
| 5 | Dell | 332-1365 | |
| 6 | Intel | X4DACBL50 | |
| 7 | NVIDIA/Mellanox | MC2609130-050 | |
| 8 | IBM | BN-QS-SP-CBL-50CM |
| Juniper Compatible |
QFX-QSFP-DACBO-50CM
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP+ to 4 x SFP+ | Max Data Rate | 40Gbps |
| Cable Length | 0.5m (1.6ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | SFF-8436, SFF-8431 and QSFP+ MSA |
| Minimum Bend Radius | 21mm | Application | 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel |
Usage Guidelines & Best Practices
Mandatory Port Breakout Configuration: Ensure the host QSFP+ port supports channelization. Enable breakout mode (4x10G) via the switch CLI before connecting the cable.
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Do not mix this breakout DAC with straight QSFP+ to QSFP+ DAC configuration.
Hot‑swap rule:Never pull or tug directly on the individual breakout legs. Always use the integrated pull-tab or bale latch when inserting or removing connectors.
Operating Environment: 0‑70℃, indoor cabinet deployment only.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 40G QSFP+ to 4 x 10G SFP+ passive breakout DAC cable can interoperate with mainstream network brands including Arista, Intel, Juniper, Dell, NVIDIA Mellanox and IBM, for mixed-vendor rack stacking and server fabric expansion.




Q1: Can this Juniper-certified 40G breakout twinax cable run without alert messages when plugged into Cisco network hardware? A: No, many enterprise switches enforce strict vendor lock-in. You need to select the brand-matching coded version when purchasing. HYTOPTODEVICE provides pre-coded Juniper certified 40G breakout twinax cable to prevent warning messages or link failure.
Q2: Is there a risk that this Junos preprogrammed 40G QSFP+ breakout DAC stops functioning after a switch firmware upgrade? A: It normally stays functional. HYTOPTODEVICE Junos preprogrammed 40G QSFP+ breakout DAC uses MSA standard EEPROM chips compatible with regular firmware upgrades, though rare aggressive OEM firmware revisions may block third-party media.
Q3: If I later migrate my network to another vendor’s switches, can I reflash this 40G QSFP+ to quad SFP+ 10G copper breakout DAC locally? A: Yes, recoding is supported. HYTOPTODEVICE supplies dedicated EEPROM programming hardware and software for this 40G QSFP+ to quad SFP+ 10G copper breakout DAC. We provide simple step-by-step guides or remote technical support for easy operation.
Q4: My Juniper switch raises an unsupported optic notice but traffic passes normally, what causes this on this Junos tuned 40G fan-out DAC? A: This is common on enterprise switches. The system checks vendor signatures and generates syslog alerts while forwarding traffic normally. HYTOPTODEVICE Junos tuned 40G fan-out DAC is pre-flashed to reduce such warning logs.
Q5: Will this generic open-architecture 4-to-10G passive breakout copper cable work properly on SONiC or Cumulus white-box switches? A: Yes, open-source network OS usually accepts standard DAC media without vendor lock restrictions. HYTOPTODEVICE validates this generic open-architecture 4-to-10G passive breakout copper cable on SONiC and Cumulus platforms.
Q6: What is the maximum working transmission length for this rack-mounted 40G QSFP+ passive breakout twinax DAC? A: Our rack-mounted 40G QSFP+ passive breakout twinax DAC supports a maximum reliable reach of 7 meters. Passive copper suffers high-frequency signal attenuation, designed only for short rack internal connections.
Q7: Will this zero-latency 40G breakout direct attach copper cable introduce packet drops or latency overhead in my data cluster? A: No, there is no extra latency or packet loss within rated distance. Passive copper has no signal retiming chips. This HYTOPTODEVICE zero-latency 40G breakout direct attach copper cable delivers near-zero latency for local rack links.
Q8: Will close bundling with power cords trigger signal degradation for this shielded 40G QSFP+ breakout twinax copper cable? A: EMI-related signal degradation risk exists. Copper twinax is sensitive to electrical interference. Even with full shielding on our HYTOPTODEVICE shielded 40G QSFP+ breakout twinax copper cable, avoid tight parallel routing next to high-voltage power wires.
Q9: Is this storage-compatible 4x10G breakout DAC suitable for FCoE and iSCSI storage networking workloads? A: Yes, it supports all standard layer 2 / layer 3 traffic. This HYTOPTODEVICE storage-compatible 4x10G breakout DAC is protocol-agnostic, compatible with Ethernet, FCoE, iSCSI and InfiniBand.
Q10: Can I enable 9000-byte jumbo frames across this jumbo-frame ready 40G to four-port 10G SFP+ breakout cable? A: Yes, jumbo frames pass transparently. Passive copper does not process frame payloads. HYTOPTODEVICE jumbo-frame ready 40G to four-port 10G SFP+ breakout cable supports standard and 9000 MTU frames without fragmentation.
Q11: What are the typical reasons for down link status after installing this plug-and-play 40G QSFP+ fan-out breakout DAC? A: Three main root causes lead to down links: missing breakout port configuration, mismatched EEPROM coding, or loose copper contacts. Enable Junos breakout mode before deploying the HYTOPTODEVICE plug-and-play 40G QSFP+ fan-out breakout DAC.
Q12: Can the 10G SFP+ tails of this 40G fan-out copper breakout DAC connect to older 1G Gigabit SFP switch interfaces? A: No, down negotiation to 1G will not work. SFP+ hardware is built for 10Gbps operation. The SFP+ legs of this HYTOPTODEVICE 40G fan-out copper breakout DAC cannot interoperate with 1G SFP ports.
Q13: Are the four 10G breakout lanes of this lane-labeled 40G to 4x10G DAC assigned in a fixed standard sequence? A: Yes, lanes follow fixed standard mapping. Each breakout leg is clearly labeled with lane ID matching the switch’s internal channel layout. HYTOPTODEVICE lane-labeled 40G to 4x10G DAC simplifies on-site deployment.
Q14: Do I need fiber-style cleaning supplies to maintain the copper gold contacts on this 40G QSFP+ breakout DAC? A: Optical cleaning pens are unnecessary, but contact protection matters. Never touch gold pins directly by hand, and keep connectors dust-free for stable links on this HYTOPTODEVICE copper contact 40G QSFP+ breakout DAC.
Q15: What AWG wire gauge is used on this flexible short-run 0.5m 40G QSFP+ breakout twinax cable and how does it impact bending? A: This 0.5m model uses 30AWG twinax. 30AWG delivers superior flexibility while maintaining stable signal integrity for short lengths; thicker gauges offer better signal performance at longer distances but are stiffer.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




