• Juniper EX-SFP-GE80KCW1510 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1510nm 80km Bulk  Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1510nm 80km CWDM SFP transceiver module
  • 80km long reach 1510nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1510nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers
  • Juniper EX-SFP-GE80KCW1510 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1510nm 80km Bulk  Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1510nm 80km CWDM SFP transceiver module
  • 80km long reach 1510nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1510nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers

Juniper EX-SFP-GE80KCW1510 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1510nm 80km Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Juniper EX‑SFP‑GE80KCW1510 compatible 1.25G CWDM SFP transceiver, 1510nm CWDM wavelength, 80km over OS2 single‑mode fiber. Pre‑coded for Juniper EX, MX, QFX hardware, alarm‑free plug‑and‑play with DDM support. Factory bulk supply for metro CWDM rings and long‑haul gigabit trunk links. 
NO. Brand  Compatible P/N Remarks
1 Juniper EX-SFP-GE80KCW1470
2 Juniper EX-SFP-GE80KCW1490
3 Juniper EX-SFP-GE80KCW1510
4 Juniper EX-SFP-GE80KCW1530
5 Juniper EX-SFP-GE80KCW1550
6 Juniper EX-SFP-GE80KCW1570
7 Juniper EX-SFP-GE80KCW1590
8 Juniper EX-SFP-GE80KCW1610




Description

Juniper EX-SFP-GE80KCW1510 Compatible 1.25G CWDM SFP Transceiver | 1000BASE‑CWDM 1490nm 80km SMF Bulk Wholesale

Product Overview

This 1.25G 1510nm CWDM SFP is a drop‑in replacement for Juniper EX‑SFP‑GE80KCW1510. It complies with 1000BASE‑CWDM standards and delivers stable gigabit connectivity up to 80km across OS2 single‑mode fiber. The 1510nm channel fits standard CWDM wavelength grid, perfect for multi‑wavelength multiplexing metro‑ring deployments.
Each HYTOPTODEVICE module comes pre‑programmed with Juniper‑matched EEPROM data. It avoids transceiver‑not‑supported alerts and port lockdowns. Hot‑swap supported with full DDM capability, no complex manual configuration required. Every unit goes through temperature cycling and burn‑in testing for dependable commercial and carrier‑grade bulk deployment. support sample test, bulk wholesale, private label and custom EEPROM Programming for global importers,distributors and system integrators.

Key Technical Specifications
 
Juniper Compatible EX-SFP-GE80KCW1490 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1490nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type PIN
TX Power 0~+4dBm Receiver Sensitivity < -26.0dBm
Power Consumption ≤1W Receiver Overload -3.0dBm
Protocols IEEE 802.3z, SFF‑8472, SFP MSA, RoHS‑6, Class 1 Laser Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber Matching: Use OS2 9/125μm single-mode fiber (up to 80km). Use standard LC-UPC connectors only; LC-APC connectors are strictly prohibited.

  • Optical Attenuation (Crucial): Never direct-connect short links (<20km). If received power exceeds -3 dBm, add an inline optical attenuator (5–10 dB) at the Rx port to prevent receiver burnout.

  • Connection & Rx/Tx Check: Ensure correct Tx/Rx fiber pairing. Keep LC connector end-faces clean to avoid extra insertion loss and bit errors.

  • Link Budget: Account for total optical loss (splices, adapters, fiber distance) before deployment to stay within the 24 dB link budget.

  • Thermal Management: Operating temp: 0°C to 70°C. Avoid dense stacking of high-power 80km SFPs to prevent overheating.

  • Hot-Swapping: Supports hot-plugging. Gently insert/pull using the bail latch to protect port pins.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
 
This 1510nm 80km CWDM SFP uses customized Juniper‑matched EEPROM profiles. It eliminates link flapping and port lockdown caused by generic third‑party optics. Plug‑and‑play operation without extra CLI unlock commands.

Tested & Compatible Juniper Platforms:
  • Juniper EX Series Ethernet Switches (EX2200, EX3300, EX4200, EX4300)
  • Juniper QFX Series Data Center Switches with gigabit SFP ports
  • Juniper MX Series Universal Routers & Service Gateways
  • Juniper SRX Series Security Firewalls with SFP interfaces
  • All Juniper hardware supporting original EX‑SFP‑GE80KCW1510 transceivers

2. Multi-Brand Cross Compatibility

Beyond dedicated Juniper compatibility, this 1510nm long-reach CWDM transceiver adheres to universal MSA industry standards, delivering excellent adaptability with global mainstream network brands including Cisco, H3C, Ruijie, ZTE and TP-Link. We support free custom firmware modification services for mixed-brand network environments, meeting personalized matching requirements for diverse engineering projects.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • 80km point‑to‑point gigabit interconnection for campus and enterprise long‑haul trunk links
  • 1510nm channel CWDM ring network construction and existing fiber‑resource expansion
  • Long‑distance trunk transmission for Juniper EX/MX core network equipment
  • ISP access‑network upgrades and remote‑site broadband extension projects
  • Legacy network renovation, improving fiber utilization through CWDM multiplexing

Connectivity Solutions(Applications)

1.
1G Long-Haul CWDM Direct Connection with Network Switches
Designed for 80km long‑haul transmission. This Juniper‑compatible SFP delivers stable 1.25G bidirectional traffic over standard single‑mode fiber. No intermediate amplifiers required. It reduces engineering costs for cross‑site trunk connections.

hytoptodevice CWDM MUX DEMUX fiber aggregation for multi-service metro ring network

2. 1G CWDM Direct Connection with Mux/Demux

Pair with standard CWDM MUX/DEMUX devices. The 1510nm module multiplexes multiple service streams over one fiber pair. It resolves fiber shortage problems and supports scalable metro‑ring network expansion.

hytoptodevice CWDM MUX DEMUX fiber aggregation for multi-service metro ring network


The Core Feature

1. Low Power & Cost-Effective Single-Fiber CWDM Solution

This 1510nm CWDM SFP uses low-power DFB chips. It supports stable 80km transmission with minimal power draw. Compatible with single and dual-fiber CWDM networking. It cuts fiber and power hardware costs, ideal for budget-friendly enterprise and ISP long-haul networking.

Error-free Juniper compatible 1510nm 80km CWDM SFP industrial stability


2.
Verified Host Interoperability for Huawei Devices

Custom Juniper-specific firmware matches original device signatures. It causes no system alarms, port errors or function limits. True plug-and-play deployment, no manual configuration needed for all compatible Juniper hardware.


DDM real-time monitoring 1.25G CWDM transceiver for long-haul fiber links

3.Rigorous Testing, Uncompromising Reliability

Every CWDM transceiver undergoes multi-stage strict testing including optical calibration, aging and temperature cycling. Built-in DDM monitoring supports real-time operating data viewing, ensuring long-term stable operation in complex metro networking environments and lowering field failure rates.

Cost-effective bulk CWDM SFP 80km for ISP and system integrators


FAQ

Q1: How much insertion loss does a CWDM Mux/Demux add to the total link budget?
A: Standard CWDM Mux/Demux adds 1.5dB to 3.5dB insertion loss per channel. High-quality passive CWDM devices keep loss below 2.5dB. This 1510nm 80km SFP features 24–26dB ample link budget, easily offsets multiplexer loss and ensures stable long-distance transmission for multi-channel CWDM networking.

Q2: Is there any risk when using 80km high-power CWDM SFP on short fiber links?
A: Yes. This CWDM 80km SFP features high TX power (0~+4.0dBm). Direct use on short-distance links or lab testing may permanently burn out the receiver end. Always deploy a 10 dB to 15 dB optical attenuator for short-span debugging and indoor tests to protect network equipment.

Q3: How does attenuation differ between low and high CWDM wavelengths for long-reach links?
A: CWDM wavelength attenuation varies greatly by band. Lower wavelengths (1270–1350nm) have higher attenuation at ~0.35 dB/km. Longer wavelengths (1510–1610nm) deliver much lower attenuation at ~0.20 dB/km. Long-reach 80km links achieve far better stability and full transmission performance on 1470–1610nm channels like this 1510nm module.

Q4: What single-mode fiber type should be used for 1.25G CWDM 80km?
A: Only OS2 9/125μm single-mode fiber is recommended for 80km 1.25G CWDM transmission. OS1 fiber has higher attenuation and cannot support full 80km reach. Multimode fiber is completely incompatible. Standard OS2 single-mode fiber ensures low loss and consistent performance for long-distance CWDM networking.

Q5: Why are 1470nm–1610nm wavelengths preferred for 80km deployments?
A: 1470nm to 1610nm CWDM wavelengths occupy the fiber low-loss transmission window. These bands have minimal signal attenuation and zero crosstalk in multiplexing scenarios. As a 1510nm module, it falls within this optimal range, delivering reliable full-distance 80km transmission and superior stability for metro long-haul networks.

Q6: Does the 1.25G CWDM 80km SFP support DDM / DOM (Digital Optical Monitoring)?
A: Yes. This Juniper compatible 1510nm 80km CWDM SFP fully supports SFF-8472 DDM/DOM digital monitoring. It enables real-time remote tracking of optical transmit power, receive power, working temperature and voltage. It supports intelligent O&M and fast fault diagnosis on all compatible Juniper devices.

Q7: Can I plug a 1.25G CWDM 80km SFP into a 10G SFP+ port?
A: Yes, it is fully compatible. SFP ports are downward compatible with 1.25G SFP modules on 10G SFP+ ports. The module auto-negotiates to 1.25G gigabit speed. No configuration changes are needed, ensuring stable operation on SFP+ equipped switches and routers.

Q8: Is the module hot-swappable?
A: Yes. This 1510nm CWDM SFP follows standard SFP hot-swap specifications. It supports live insertion and removal without powering down network devices. It allows safe, non-service-interrupting module replacement for on-site
maintenance and upgrades.

Q9: Why does my switch show "Unrecognized/Unsupported Transceiver" when inserted?
A: This error mainly comes from unadapted transceiver firmware. Generic modules lack dedicated Juniper EEPROM coding. Our modules are pre-flashed with official-matched Juniper firmware to eliminate unrecognized transceiver alarms, port lockdown and system logs for zero-alarm plug-and-play use.

Q10: What is the operating temperature range for 1.25G CWDM 80km SFPs?
A: This commercial-grade 1510nm CWDM SFP supports 0°C to 70°C continuous operation. It fits standard indoor equipment room environments perfectly. All units pass strict temperature cycling tests to ensure stable 24/7 long-term commercial operation.

Q11: Do I need Industrial-Grade (-40°C to 85°C) modules for outdoor cabinets?
A: Yes. Standard commercial modules (0°C–70°C) cannot withstand extreme outdoor temperature fluctuations. For outdoor cabinet, pole-mounted and uncooled field environments, industrial-grade CWDM SFPs are required to avoid link dropout and module failure under high/low extreme temperatures.

Q12: What happens to a CWDM laser when it overheats?
A: Overheating causes CWDM laser wavelength drift, reduced transmit power and increased signal attenuation. Severe overheating leads to unstable links, intermittent dropout or permanent laser burnout. Our modules feature temperature resistance design and DDM temperature monitoring to effectively avoid overheating risks.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Juniper EX-SFP-GE80KCW1510 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1510nm 80km Bulk  Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1510nm 80km CWDM SFP transceiver module
  • 80km long reach 1510nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1510nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download