• HYTOPTODEVICE 40G QSFP+ PASSIVE COPPER CABLE FOR DATA CENTER
  • hytoptodevice supply 40g qsfp+ dac cable passive copper twinax
  • 40g dac cable passive copper twinax DAC from hytoptodevice
  • Passive copper twinax cable 40g qsfp+
  • HYTOPTODEVICE 40G QSFP+ PASSIVE COPPER CABLE FOR DATA CENTER
  • hytoptodevice supply 40g qsfp+ dac cable passive copper twinax
  • 40g dac cable passive copper twinax DAC from hytoptodevice
  • Passive copper twinax cable 40g qsfp+

Juniper EX-QSFP-40GE-DAC-1M Compatible 40G QSFP+ Passive Copper Cable 1m(3ft) Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE is a trusted factory supplier for bulk purchase of 40G QSFP+ passive copper cable. This 1m(3ft) Juniper compatible 40G QSFP+ passive copper cable is designed for use in 40GBASE Ethernet, supports 40GBASE-CR4, ideal for ultra-short intra-rack cabling on Juniper Junos OS platforms. Buy 40G QSFP+ passive copper cable for Juniper leaf-spine fabric and switch stacking.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco QSFP-H40G-CU1M 
2 Arista Networks  CAB-Q-Q-1M
3 Juniper EX-QSFP-40GE-DAC-1M
4 Brocade 40G-QSFP-C-0101
5 Dell 470-AAVN
6 Intel XLDACBL1
7 NVIDIA/Mellanox MC2206130-001
Description

Juniper EX-QSFP-40GE-DAC-1M Compatible 40G QSFP+ Passive Copper Cable 1m(3ft) Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 1m(3ft) QSFP+ to QSFP+ 40G QSFP+ passive copper cable serves as direct drop-in replacement for Juniper EX-QSFP-40GE-DAC-1M. It is designed for use in 40GBASE Ethernet, meets 40GBASE-CR4, SFF-8436 and IEEE 802.3bj standards to deliver stable 40Gbps ultra-short intra-rack connections. This twinax DAC has no active chips, consumes 0W power and supports hot swap. We preload Juniper-matched EEPROM signatures to eliminate transceiver warning logs on Juniper Junos OS switches. Available for bulk order, sample testing and OEM private label service for distributors and system integrators.

Key Technical Specifications

Juniper Compatible
EX-QSFP-40GE-DAC-1M 
Vendor Name HYTOPTODEVICE
Connector QSFP+ to QSFP+ Max Data Rate 40Gbps
Cable Length 1m (3ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.5W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols SFF-8436, QSFP+ MSA and IEEE 802.3ba
Minimum Bend Radius 35mm Application 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Setting: Host QSFP+ port must enable 40GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.

  • Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.

  • Port Installation Standard: Works only with standard QSFP+ 40G ports; cannot be inserted into SFP+ or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.

  • Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Juniper Hardware & Firmware

  • Juniper QFX5100, QFX5200, QFX5120 series 40G leaf-spine switches running Junos OS
  • Juniper EX4300, EX4600 high-density 40G Ethernet switching platforms
  • Juniper ACX7100, SRX4700 routing & security appliances with QSFP+ ports

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 40G QSFP+ passive copper cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 
  • Ultra-short intra-rack leaf-to-server cabling for Juniper Junos OS leaf-spine fabrics
  • Juniper 40G switch stacking and fabric interconnect inside compact server racks
  • Low-latency distributed storage and NVMe-oF networking
  • Virtualization and hyper-converged infrastructure short connections
  • Direct replacement for original Juniper EX-QSFP-40GE-DAC-1M QSFP+ to QSFP+ 40G QSFP+ passive copper cable
  • High-density rack internal 40G interconnection for 40GBASE Ethernet deployments

Connectivity Solutions(Applications) 

1. 40G to 40G Direct Link for Switch-Switch
hytoptodevice 40g qsfp+ passive copper cable for switch to switch

The Core Feature

1. Cost-Effective Ultra-Short Connectivity

Using twinax copper, the 40G passive copper cable replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

hytoptodevice QSFP+ to QSFP+ 40g qsfp+ dac cable for data center

2. Ultra-Low Power, Maximum Energy Efficiency

The 40g qsfp+ passive copper twinax cable draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 40G link for short-reach connections — within a rack or across adjacent racks.

QSFP+ form factor 40g qsfp+ dac cable with low power consumption

3.Host-Device Tested for Proven Interoperability

Every 40g passive copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits? Compatibility Video available upon request.

hytoptodevice wholesale 40G QSFP+ twinax cable for data center

4. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  QSFP+ to QSFP+ 40g qsfp+ dac cable for switches

FAQ

Q1: Will this Juniper compatible 40G QSFP+ passive copper cable interoperate with my existing multi-vendor switching hardware? A: Yes, this HYTOPTODEVICE 40G QSFP+ passive copper cable supports cross-brand interoperation. It is preloaded with Juniper Junos optimized EEPROM and tested, delivering stable 40GBASE Ethernet links across mainstream switch platforms.

Q2: Why does Junos OS throw a transceiver incompatible alert after plugging in the DAC cable? A: This alert usually triggers from unmatched vendor signature checks. HYTOPTODEVICE pre-programs Juniper-specific EEPROM for this 40G QSFP+ passive copper cable to greatly lower incompatible alerts in 40GBASE Ethernet deployments.

Q3: Can MSA-compliant 40G twinax DAC guarantee plug-and-play performance on white-box open switches? A: No, MSA standards only cover mechanical and electrical parameters. Generic twinax may lack valid identification data, while HYTOPTODEVICE 40G QSFP+ passive copper cable completes real hardware verification for open switch 40GBASE Ethernet.

Q4: What network topology applies to a QSFP+ to 4×SFP+ breakout twinax DAC? A: A breakout DAC splits one 40G QSFP+ port into four separate 10G SFP+ links. This straight HYTOPTODEVICE 40G QSFP+ passive copper cable carries full 40G bandwidth natively for point-to-point Juniper 40GBASE Ethernet.

Q5: Does a Juniper QFX switch require special port settings to activate breakout DAC links? A: Yes, breakout mode must be enabled via Junos CLI on supported ports. This HYTOPTODEVICE straight 40G QSFP+ passive copper cable needs no breakout configuration and runs native 40GBASE Ethernet right away.

Q6: What deployment scenarios suit straight 40G DAC versus breakout 40G DAC? A: Straight 40G DAC builds one full 40G connection between two QSFP+ ports; breakout DAC splits bandwidth for 10G downlinks. Our 40G QSFP+ passive copper cable is designed for Juniper native 40GBASE Ethernet interconnection.

Q7: What is the maximum reliable reach you can get with passive 40G QSFP+ twinax copper? A: The reliable upper limit for passive 40G QSFP+ twinax is 5–7 meters. This 0.5m HYTOPTODEVICE 40G QSFP+ passive copper cable is ideal for ultra-short rack internal 40GBASE Ethernet with minimal signal attenuation.

Q8: How do different AWG ratings change signal loss for 40G twinax DAC on Juniper racks? A: Thicker wires (lower AWG numbers like 24AWG) experience lower signal attenuation over longer runs (5m–7m), whereas thinner wires (30AWG) are better suited for short, flexible runs (0.5m–2m). This 30AWG HYTOPTODEVICE 40G QSFP+ passive copper cable balances flexible routing and steady signal integrity for short 40GBASE Ethernet links.

Q9: Which AWG grade works best for dense cable management with 40G QSFP+ DAC assemblies? A: Yes. 24AWG cables are thick, heavy, and rigid. They require careful bend radius management to prevent putting excessive mechanical strain on switch port cages. 30AWG twinax offers superior flexibility for dense layouts. This HYTOPTODEVICE 0.5-2m 40G QSFP+ passive copper cable uses 30AWG, making routing easier on high-density Juniper patch panels and cable arms for 40GBASE Ethernet.

Q10: Is it permitted to route passive 40G QSFP+ DAC outside the server cabinet or through walls? A: No, passive twinax DAC is engineered only for indoor cabinet deployment. It has no outdoor-rated jacket, so this 40G QSFP+ passive copper cable should stay within data racks for 40GBASE Ethernet.

Q11: What upgrade option replaces passive 40G DAC when connection length exceeds 7 meters? A: Active Optical Cable (AOC) is the proper choice for links over 7m. This HYTOPTODEVICE 40G QSFP+ passive copper cable delivers a budget-friendly zero-power solution for short rack-local 40GBASE Ethernet.

Q12: How does total cost compare between 40G twinax DAC and QSFP+ transceivers plus MTP fiber? A: Passive twinax DAC cuts cost significantly by removing optical module expenses. This HYTOPTODEVICE 40G QSFP+ passive copper cable lowers total hardware spend for short Juniper 40GBASE Ethernet fabric links.

Q13: Will nearby power cables create EMI issues for 40G QSFP+ passive copper DAC? A: Shielded twinax suppresses EMI but remains more sensitive than fiber. HYTOPTODEVICE adopts high-grade shielding for this 40G QSFP+ passive copper cable to stabilize 40GBASE Ethernet performance beside power cabling.

Q14: Can an adapter let a 40G QSFP+ DAC work inside a standard 10G SFP+ port? A: No, QSFP+ and SFP+ differ in pin definition and lane grouping. This 40G QSFP+ passive copper cable only operates between two native QSFP+ ports to establish valid 40GBASE Ethernet.

Q15: Can this Juniper compatible 40G QSFP+ DAC directly connect a server QSFP+ NIC to a switch? A: Yes, as long as the server NIC has native QSFP+ interface. This HYTOPTODEVICE 40G QSFP+ passive copper cable builds low-latency 40GBASE Ethernet links between 40G NICs and Juniper switching hardware.


Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • HYTOPTODEVICE 40G QSFP+ PASSIVE COPPER CABLE FOR DATA CENTER
  • hytoptodevice supply 40g qsfp+ dac cable passive copper twinax
  • 40g dac cable passive copper twinax DAC from hytoptodevice
  • Passive copper twinax cable 40g qsfp+
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download