Intel XDACBL0.5M Compatible 10G SFP+ DAC Cable 50cm | 10GBASE-CU Passive Copper Twinax Cable HYTOPTODEVICE
Product Overview
HYTOPTODEVICE Intel XDACBL0.5M compatible 10G SFP+ passive twinax DAC cable is a drop-in replacement for the original Intel 0.5m 10G copper DAC. It meets SFF-8431 and 10GBASE-CU MSA standards. As a reliable manufacturer and supplier, we produce this cable for stable low-latency 10Gbps transmission, ideal for short server uplink and intra-rack connections.
It comes pre-programmed with Intel EEPROM signature for plug-and-play and avoids Intel NIC/switch transceiver warning alerts. HYTOPTODEVICE factory supports bulk supply, sample testing and OEM private label for data center and server integration projects.
Key Technical Specifications
| Intel Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
0.5m (1.6ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
20mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target Cisco hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated HPE Hardware & Firmware
This SFP+ passive dac cable is preloaded with Dell Force10 EEPROM data, supports alarm-free plug-and-play under FTOS. Every cable passes target switch testing before shipment:
• Dell Force10 S4810, S5000, S6010-ON switch platforms
• Dell Force10 MXL blade switch, Z9000 core switch
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this SFP+ DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• Intel server NIC to ToR switch 10G short uplink
• Intra-rack server cluster low-latency interconnection
• Virtualization cluster and storage fabric interconnection
• Cost-effective short 10G links replacing fiber patch cords
• Bulk inventory sourcing for server integrators and data center contractors
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the 10G SFP+ DAC Cable replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive 10g SFP+ DAC cable draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Can this factory-supplied 10G SFP+ DAC cable work normally with Intel NIC and other brand switches?
A: Yes, it supports cross-vendor 10GBASE-CU SFP+ ports. HYTOPTODEVICE manufacturer pre-codes EEPROM and validates on target hardware. Test samples first for locked firmware.
Q2: Can our team re-program the EEPROM ID if we change server adapter brands later?
A: Yes, EEPROM reprogramming service is available. HYTOPTODEVICE factory supplies optional coding tools and free lifetime technical support for signature modification.
Q3: How does AWG conductor size affect signal quality on factory-made short 10G SFP+ DAC cable?
A: AWG defines copper conductor thickness. This 50cm Intel compatible DAC uses 30AWG. Thin gauge brings great flexibility for tight server routing, thicker 24AWG reduces attenuation for longer DAC runs.
Q4: What bending specification should we follow for this Intel compatible 10G SFP+ twinax DAC?
A: Follow the 20mm minimum bend radius. The standard minimum bend radius is typically 5 times the outer cable diameter. Bending lower than this can deform the internal twinax structure and cause bit errors.
Q5: What is the power consumption gap between factory manufactured passive 10G SFP+ DAC and active DAC?
A: Yes, active DAC consumes extra power for signal amplification. Our factory passive 10G DAC draws less than 0.1W. It helps cut total power budget for dense Intel server racks.
Q6: Why choose factory direct 10G SFP+ twinax DAC instead of AOC for Intel server uplink?
A: Passive DAC delivers better latency and lower cost for links under 7 meters. HYTOPTODEVICE factory twinax DAC has no optical chips, perfect for fixed short-distance server uplink.
Q7: Between factory wholesale 10G SFP+ DAC and Cat6a 10GBASE-T, which creates less thermal load in server racks?
A: Passive DAC runs much cooler. 10GBASE-T PHY chips continuously generate heat. This factory-produced DAC has no powered components and reduces rack thermal pressure.
Q8: Will this bulk supply 10G SFP+ twinax DAC trigger EMI interference in dense Intel server chassis?
A: Our fully shielded twinax design keeps EMI low. HYTOPTODEVICE factory DAC meets industry EMC standards. The shielding blocks crosstalk among packed server adapters.
Q9: What common issues cause unstable links and rising CRC errors on factory supplied 10G SFP+ DAC connections?
A: Damaged conductors or dirty contacts are the top triggers. Our factory 100% inspection filters defective units. Sharp bends and mismatched port speed also lead to link flapping.
Q10: Is FEC required to keep stable 10GBASE-CU links for factory compatible Intel 10G SFP+ DAC?
A: FEC is not required for passive 10GBASE-CU DAC. FEC is built for long-reach optical links. Disable FEC to skip extra processing overhead on Intel NIC ports.
Q11: Can long high cabinet temperature shorten the service life of factory bulk 10G SFP+ DAC twinax cables?
A: Yes, sustained high heat speeds up jacket and copper aging. HYTOPTODEVICE factory DACs pass thermal cycle testing. It supports reliable 24/7 operation inside warm server cabinets.
Q12: What is the difference between PVC and LSZH jacket options for factory wholesale 10G SFP+ DAC cable?
A: PVC suits regular indoor racks at lower manufacturing cost. LSZH releases minimal smoke and zero halogens in fire. HYTOPTODEVICE factory offers both jacket choices for bulk DAC orders.
Q13: Does frequent plugging damage the gold contacts of factory made Intel compatible 10G SFP+ DAC?
A: Repeated hot-plugging slowly wears gold plating on contacts. HYTOPTODEVICE factory DAC uses premium gold-plated contacts. It extends plug cycles for regular server fabric reconfiguration.
Q14: Can I insert this factory 10G SFP+ DAC cable into a 25G SFP28 server uplink port?
A: It may negotiate down to 10G speed. Final performance depends on adapter firmware. Complete sample verification before large-scale SFP28 uplink deployment.
Q15: Can I use this factory supply 10G SFP+ DAC with breakout adapters on a 40G QSFP+ port?
A: Native 40G operation is not supported. This DAC only transmits 10G signal. Confirm breakout adapter and hardware compatibility with the HYTOPTODEVICE factory technical team in advance.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

