| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | GLC-T | |
| 2 | Alcatel-Lucent | SFP-GIG-T | |
| 3 | Brocade | E1MG-TX | |
| 4 | Cisco Meraki | MA-SFP-1GB-TX | |
| 5 | Huawei | SFP-1000BaseT | |
| 6 | IBM | 00FE333 | |
| 7 | Juniper Networks | JX-SFP-1GE-T | |
| 8 | HPE | JD089A | |
| 9 | HPE Procurve | J8177B | |
| 10 | IBM | 00FE333 | |
| 11 | Ruijie | MINI-GBIC-GT |
| IBM Compatible | 00FE333 | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Data Rate | 1000Mbps |
| Connector | RJ-45 | Cable Distance | 100m |
| Media | Copper | Cable Type | Cat 5e/6/6a (UTP) |
| Max. Power Consumption | ≤1.2W | DDM Support | YES |
| Protocols | MSA Compliant, IEEE STD 802.3 and 802.3ab | Operation Temperature | 0 to 70°C (32 to 158°F) |
Standard: Cat5e or Cat6 twisted-pair cable is required to achieve full 100-meter Gigabit performance.
Note: Standard Cat5 cable may limit link stability at full 1G speed and is not recommended.
Live Insertion: The SFP copper transceiver supports live insertion and removal.
Precaution: Avoid repeated hot swapping under continuous heavy traffic loads to ensure optimal hardware longevity.
Heat Dissipation: This 1Gbps copper module generates mild heat during operation.
Deployment Advice: Verify the switch thermal budget and ensure adequate ventilation before fully populating all SFP ports.
Fixed Rate: This transceiver operates at a fixed 1000Mbps speed only.
Compatibility Warning: It cannot auto-negotiate down to 100Mbps or 10Mbps. The connected peer device must support 1G speed to successfully establish a link.
Storage Environment: Keep unused transceivers stored in dry, ESD-safe packaging.
Dust Protection: Always fit dust caps onto the RJ45 port when the module is not in service.
Built on SFP MSA and IEEE standards, this copper transceiver also works with Cisco, MikroTik, Avaya Nortel and other mainstream network hardware, ideal for mixed-vendor legacy network upgrade projects.



The Core Features



FAQ
Q1: Will 1000BASE-T actually deliver the full 1 Gbps speed promised in real-world conditions? A: Yes, HYTOPTODEVICE IBM 00FE333 compatible 1000BASE-T SFP copper module runs at low power around 1.2W. While the physical layer supports 1 Gbps, overhead, packet loss, and cable quality typically limit actual throughput to around 940–980 Mbps under ideal conditions. With certified Cat5e/Cat6 wiring within 100m, our modules maintain this stable throughput for office and data center network traffic.
Q2: What is the latency difference between 1000BASE-T copper and fiber-optic alternatives? A: 1000BASE-T copper has slightly higher latency than fiber modules. HYTOPTODEVICE fixed-rate 1000BASE-T SFP typically adds roughly 0.3–0.6µs extra latency compared to 1G fiber transceivers. This small delay suits office LAN, storage and surveillance, though fiber remains better for ultra-low-latency industrial workloads.
Q3: How does 1000BASE-T perform under high packet loss or interference? A: Heavy electromagnetic interference will raise packet loss and reduce link stability for 1000BASE-T. HYTOPTODEVICE IBM 00FE333 compatible copper transceiver includes built-in signal equalization to resist mild crosstalk, but strong EMI sources will trigger bit errors. Shielded cabling helps suppress noise and preserve link integrity in noisy rack environments.
Q4: Does 1000BASE-T support link aggregation (LACP) to combine ports for higher bandwidth? A: Yes, this HYTOPTODEVICE IBM 00FE333 compatible 1000BASE-T SFP module fully supports LACP link aggregation. Multiple gigabit ports can be bundled together on IBM RackSwitch hardware to increase total throughput and add link redundancy. LACP works at switch level while each individual module runs native 1000BASE-T.
Q5: How does long-term continuous data transfer affect 1000BASE-T hardware stability? A: Continuous heavy data transfer will not degrade HYTOPTODEVICE 1000BASE-T module performance when operated within rated temperature range. Every IBM 00FE333 compatible unit undergoes burn-in testing before shipment for long-run reliability. Sustained traffic only creates minor heat buildup, so proper rack ventilation is recommended for 24/7 operation.
Q6: Do I need to replace my existing Cat5e cabling to upgrade to 1000BASE-T? A: No, certified Cat5e cabling is fully sufficient for 1000BASE-T up to 100 meters. HYTOPTODEVICE IBM 00FE333 compatible gigabit copper transceiver works perfectly on properly terminated Cat5e cable. You only need to replace cables if they show physical damage or failed cable certification test results.
Q7: Can I use old Cat5 (non-e) cables for a Gigabit network? A: No, standard Cat5 cable cannot reliably run 1000BASE-T at full 1Gbps speed. HYTOPTODEVICE 1000BASE-T SFP module requires Cat5e or Cat6 media to maintain gigabit link within 100m. Cat5 only supports stable 100Mbps and will frequently drop or fail to negotiate gigabit links.
Q8: How sensitive is 1000BASE-T to poor punch-down termination or damaged RJ45 connectors? A: 1000BASE-T is highly sensitive to bad cable termination and faulty RJ45 connectors. Even small wiring errors will introduce crosstalk and prevent the HYTOPTODEVICE IBM 00FE333 compatible module from locking a 1G link. Always verify jack termination and inspect connector pins before deployment.
Q9: Can 1000BASE-T run over patch panels and wall jacks without performance loss? A: Yes, 1000BASE-T works through patch panels and wall jacks if all components are Cat5e rated and correctly wired. HYTOPTODEVICE 1000BASE-T copper transceivers tolerate standard structured cabling systems. Excessive connection points or low-quality jacks will accumulate signal loss and degrade gigabit performance.
Q10: How do I troubleshoot when a 1000BASE-T link unexpectedly drops to 100 Mbps? A: A link falling to 100Mbps usually points to cabling or connector faults, not the HYTOPTODEVICE IBM 00FE333 compatible module. This module only supports fixed 1000Mbps; if the link drops to 100M, the connection cannot establish and will show no valid link. Inspect cable damage, connector pins and confirm the peer device supports gigabit operation.
Q11: Is upgrading from Fast Ethernet (100 Mbps) to 1000BASE-T cost-effective for small offices? A: Yes, upgrading to HYTOPTODEVICE IBM 00FE333 compatible 1000BASE-T SFP modules offers strong ROI for small office networks. The low wholesale cost of our gigabit copper transceivers delivers 10x bandwidth improvement. It reduces file transfer waiting time and supports IP cameras and NAS storage without large infrastructure changes.
Q12: Do 1000BASE-T switches consume a lot of electricity? A: No, 1000BASE-T copper modules have relatively low power draw. HYTOPTODEVICE IBM 00FE333 compatible SFP copper transceiver features low power design to keep power consumption minimal. Total power load mainly depends on switch hardware, and adding these gigabit copper modules creates only a small incremental power increase.
Q13: What hidden costs should I anticipate when deploying a large-scale 1000BASE-T network? A: The main hidden costs for mass 1000BASE-T deployment come from cable certification, re-termination and site testing. HYTOPTODEVICE supplies bulk 1000BASE-T SFP modules with sample evaluation service to help buyers reduce project risk. Planning for cable testing and spare module stock will avoid unexpected delays during rollout.
Q14: How long is the typical lifecycle of a 1000BASE-T network switch before obsolescence? A: Properly maintained 1000BASE-T switch hardware can remain functional for 8–12 years. HYTOPTODEVICE IBM 00FE333 compatible 1000BASE-T copper transceivers match this service lifespan for legacy IBM RackSwitch. Gigabit copper technology remains widely used for access layer networks and will not become obsolete soon.
Q15: How do I test and certify my 1000BASE-T cabling installation? A: Yes, installers rely on professional cable testers to validate wiring performance. These tools measure near-end crosstalk, signal attenuation and return loss to meet TIA/EIA cabling standards. Test all runs before deploying HYTOPTODEVICE IBM 00FE333 compatible modules to avoid unstable gigabit links after project go-live.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




