HYTOPTODEVICE D-Link DEM-436XT-BXU Compatible SFP BiDi 10G 40km Transceiver – Simplex LC Single-Fiber BiDi 10G 40km Single-Mode Optic, Native D-Link OS Recognition, Bulk Wholesale Procurement Available
Product Overview
Our HYTOPTODEVICE D-Link DEM-436XT-BXU Compatible transceiver is single strand SFP BiDi 10G 40km transceiver, built for 40km point-to-point transmission over single strand OS2 single mode fiber.
• Wavelength: Tx1270nm/Rx1330nm (Match
D-Link DEM-436XT-BXD standard BiDi pairing)
• Interface: Standard LC simplex connector
• Transmission Distance: Stable 40km @10Gbps SMF OS2
Compliant with Hot-Pluggable SFP+ MSA, SFF-8472,SFP-8431, IEEE 802.3ae and RoHS standards and fully DDM/DOM real-time monitoring support, Delivering high-speed performance with optimized power efficiency, this single-strand SFP BiDi 10G 40km transceiver is the ideal solution for cross-campus backbones, metropolitan area network (MAN) rings, and long-range data center interconnects (DCI). We support samples, bulk wholesale and OEM private labeling, submit bulk inquiry or RFQ for competitive pricing and long-term supply contracts.
Key Technical Specifications
Our high-performance SFP BiDi 10G 40km Transceiver is strictly manufactured, optically calibrated and fully inspected in accordance with D-Link DEM-436XT-BXU specifications, SFP MSA and IEEE 802.3ae industry standards. Every module undergoes rigorous optical, electrical and protocol compatibility verification to deliver consistent, low-BER and reliable 40km simplex transmission for D-Link switching platforms. All precise technical parameter values are listed in the specification table for enterprise network procurement reference.
| D-Link Compatible |
DEM-436XT-BXU |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
10.7Gbps |
| Wavelength |
TX1270nm/RX1330nm |
Max Distance |
40km |
| Connector |
Simplex LC |
Transmitter Type |
1270nm DFB |
| Cable Type |
SMF |
Receiver Type |
PIN |
| TX Power |
-1.0~+5dBm |
Receiver Sensitivity |
< -15dBm |
| Max. Power Consumption |
≤1W |
DOM/DDM |
Fully Supported |
| Protocols |
SFP+ MSA, SFF-8472, IEEE 802.3ae, RoHS Compliant |
Operation Temperature |
0 to 70°C (32 to 158°F) |
Pairing Guidance
This SFP BiDi 10G 40KM transceiver must pair with complementary DEM-436XT-BXD(1330nm-TX / 1270nm-RX) modules to build full-duplex single-fiber links. We offer exclusive bundled discounts for paired bulk orders; customized 10km/20km/60km BiDi variants are available via OEM bulk order quote request.
The Required Matched Pairs here: 10G SFP+ BiDi Tx 1330nm / Rx 1270nm 40km module
Full Compatibility List & Supported Network Hardware
1.Native D-Link OS Compatibility
Every factory-calibrated SFP BiDi 10G 40km Transceiver passes real-machine interoperability testing on official D-Link operating systems. Preloaded with exclusive D-Link matching data, the module achieves zero recognition failure, no unsupported transceiver alert logs, and complete real-time DDM data display on D-Link network devices. It supports direct replacement of original D-Link DEM-436XT-BXU modules without extra configuration debugging, ensuring stable and compliant operation for commercial campus and enterprise transport network bulk procurement projects.
Compatible D-Link Device Series:
- D-Link DGS Series Layer 3 Core Campus Switches
- D-Link DES Series Enterprise Access Aggregation Switches
- D-Link Cross-Campus Core-to-Access 40km Single-Fiber Interconnection Equipment
- D-Link Office Building Long-Reach Trunk Hardware
2.Multi-Brand Cross Compatibility
Built strictly to universal SFP+ MSA industry standards, HYTOPTODEVICE’s D-Link-compatible SFP BiDi 10G 40km Transceiver breaks strict OEM vendor lock-ins, delivering seamless cross-brand interoperability for hybrid multi-vendor enterprise network environments.
- Open-Brand Devices (Plug-and-Play): 100% natively interoperable SFP BiDi 10G 40km Transceiver for open-architecture network hardware including Fortinet, Ubiquiti, MikroTik, Zyxel,Ciena,Ruijie and other mainstream open switching platforms.
- Locked-Brand Devices (Native Matching Coding): Powered by our proprietary EEPROM writing technology, our calibrated 40km single-fiber BiDi SFP BiDi 10G 40km Transceiver bypasses OEM firmware encryption restrictions, maintaining full stable compatibility with Cisco, H3C, Huawei, Dell, Juniper and more.
3.Free Custom EEPROM Re-Flash Service
Complimentary permanent EEPROM rewrite for all bulk orders of SFP BiDi 10G 40KM Transceiver. Upgrade D-Link OS or migrate modules to other brand racks; our team re-codes firmware free of charge to maintain stable 40km single-fiber bidirectional links for evolving multi-vendor metro architectures.
Primary Application Scenarios
Optimized for 40km simplex single-mode transmission, the high-performance SFP BiDi 10G 40km Transceiver fully matches D-Link DEM-436XT-BXU optical parameters and D-Link OS protocol compatibility. Featuring ultra-low BER rate, stable WDM wavelength separation and robust anti-dispersion signal output, this compatible optical module is widely deployed in typical enterprise application scenarios:
- Bulk replacement and upgrade of aging D-Link DEM-436XT-BXU modules for campus 40km single-fiber aggregation interconnection
- University campus backbone network bandwidth iteration adopting SFP BiDi 10G 40km Transceiver to build cost-saving single-fiber 10G core links
- Enterprise cross-building point-to-point interconnection deploying simplex SFP BiDi 10G 40km Transceiver for fiber-saving 40km 10G trunk transmission
- Industrial park and office park edge bandwidth expansion using low-jitter single-fiber BiDi SFP BiDi 10G 40km Transceiver for medium-haul optical transmission
- System integrator large batch procurement standard SFP BiDi 10G 40km Transceiver for multi-vendor hybrid D-Link campus network integration projects
- Commercial enterprise data room infrastructure transformation adopting SFP BiDi 10G 40km Transceiver for single-fiber core-to-access trunk deployment
Connectivity Solutions(Applications)
1.Switch-to-Switch
Build stable 40km single-fiber 10G aggregation trunk links between D-Link core campus switches with SFP BiDi 10G 40km Transceiver.
2.Switch-to-NIC
Enable long-distance single-fiber 10G uplinks from D-Link switches to server NICs for stable remote office endpoint access.

3.Core to Access (With Structured Cabling)
Adapts standard indoor structured cabling to realize reliable core-to-access long-haul interconnection, expanding 10G coverage for layered D-Link campus network architecture.

Features | Increasing Utilization of Existing Fiber
The BiDi transceiver transmits and receives data on the same strand of fiber, greatly saving 50% network fiber resources and costs.
This SFP BiDi 10G 40km Transceiver realizes bidirectional 10G transmission through a single fiber strand. Replacing traditional dual-fiber cabling layouts, it greatly improves existing fiber utilization, saves 50% physical fiber resources, and provides cost-efficient stable 40km long-reach links for layered D-Link campus core-to-access network construction. Compact SFP form factor, low power consumption and hot-swappable design simplify on-site deployment and cut long-term cabinet operation costs, ideal for mass procurement by system integrators and enterprise IT departments.

FAQ
Q1: I plugged in the modules on both sides, but the link is completely dead. What did I miss?
A: BiDi transceivers need matching opposite transmit/receive wavelengths at two ends; mismatched pairs result in zero optical reception. HYTOPTODEVICE marks clear wavelength labels on every SFP BiDi 10G 40km Transceiver to avoid pairing errors for cross-building campus network deployment.
Q2: The module fits perfectly, but my signal loss is massive at the patch panel. Why?
A: Dirty or scratched simplex LC connectors and misaligned patch panel adapters cause heavy insertion loss. HYTOPTODEVICE factory polished SFP BiDi 10G 40km Transceiver LC ports reduce extra loss in multi-vendor structured cabling setups.
Q3: Why do the color pull-tabs look different depending on the brand I buy?
A: Pull-tab colors serve as wavelength identification with no unified industry standard. HYTOPTODEVICE uses consistent color coding on SFP BiDi 10G 40km Transceiver pull-tabs for easy sorting during large-batch enterprise procurement.
Q4: Can I test these 40km modules on a short 2-meter patch cord in my lab?
A: Direct short fiber testing will overload and damage the receiver permanently. Use inline attenuators for testing; HYTOPTODEVICE SFP BiDi 10G 40km Transceiver comes with operation guidelines for enterprise network laboratory verification scenarios.
Q5: My actual link distance is only 15km. Do I need to buy attenuators?
A: Yes, attenuators are required for spans under 20km to prevent receiver saturation. HYTOPTODEVICE SFP BiDi 10G 40km Transceiver features fixed high transmit power designed for 30–40km enterprise long-distance trunk links.
Q6: Why does my link flap or drop packets during extreme cold or hot weather?
A: Temperature changes shift laser wavelengths out of filter passbands. Precisely calibrated optical components inside HYTOPTODEVICE SFP BiDi 10G 40km Transceiver stabilize signals for outdoor park backbone networking projects.
Q7: Why does one side of my link show a slightly stronger signal than the other?
A: BiDi uses two different wavelengths with distinct fiber attenuation rates. HYTOPTODEVICE balanced dual-wavelength design SFP BiDi 10G 40km Transceiver narrows signal gaps on D-Link compatible single-fiber interconnection links.
Q8: Is it safe to upgrade my switch OS if I'm running third-party BiDi optics?
A: Most generic third-party optics lose DDM access after firmware upgrades. HYTOPTODEVICE well-adjusted register configuration SFP BiDi 10G 40km Transceiver maintains full compatibility with all official D-Link switch OS versions.
Q9: My switch says the link is up, but I can't read the light levels. Why?
A: Low-grade BiDi optics adopt non-standard registers unrecognizable by switch diagnostic tools. HYTOPTODEVICE MSA standard compliant SFP BiDi 10G 40km Transceiver outputs complete real-time DDM light data for daily network troubleshooting.
Q10: Will using a third-party module void my switch hardware warranty?
A: Authorized compatible pluggable optics will not void most mainstream switch warranties. HYTOPTODEVICE fully spec-matched SFP BiDi 10G 40km Transceiver complies with D-Link hardware interoperability standards without invalidating equipment warranty.
Q11: Why does the module feel loose inside my white-box switch slot?
A: Cheap modules use low-tolerance plastic shells with poor locking performance. Precision molded tight tolerance shell SFP BiDi 10G 40km Transceiver from HYTOPTODEVICE stays firmly seated inside generic white-box switch ports.
Q12: The link dropped. How do I know if the module died or if the physical fiber broke?
A: Swap the paired BiDi modules to opposite ends; if the fault moves with the optic, the transceiver is defective. The reliable DDM telemetry of HYTOPTODEVICE SFP BiDi 10G 40km Transceiver quickly distinguishes fiber faults from module failures during campus network maintenance work。
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


