Huawei QSFP28-100G-PSM4 Compatible 100G QSFP28 Transceiver | PSM4 1310nm 500m MPO SMF | HYTOPTODEVICE
Product Overview
This 100G PSM4 QSFP28 acts as a 1:1 drop-in replacement for Huawei QSFP28-100G-PSM4.
It delivers stable low-latency links for all Huawei CloudEngine switches running VRP firmware.
It uses four independent 25G NRZ parallel lanes centered at 1310nm.
Max valid transmission distance reaches 500m over MPO-12 APC OS2 single ribbon fiber.
No CWDM multiplexer inside cuts fiber loss and simplifies dense cabinet MPO wiring.
Compliant with IEEE 802.3bm and universal QSFP28 MSA industry standards.
Each unit comes with Huawei-matched EEPROM to eliminate "unsupported transceiver" logs.
Integrated DDM/DOM and standard RS-FEC ensure ultra-low BER for production networks.
Main use cases: Huawei leaf-spine fabric, rack trunk, ToR server uplink, 100G-to-4×25G breakout.
Key Technical Specifications
| Huawei Compatible |
QSFP28-100G-PSM4 |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
QSFP28 |
Max Data Rate |
103.125Gbps (4x 25.78Gbps) |
| Wavelength |
1310nm
|
Max Distance |
500m@OS2 |
| Connector |
MTP/MPO-12 APC |
Transmitter Type |
4xDFB |
| Cable Type |
SMF |
Receiver Type |
PIN |
| FEC Support |
Yes |
TX Power |
-5.5~+2dBm |
| Power Consumption |
<3.5W |
Receiver Sensitivity |
< -10.2dBm |
| Protocols |
QSFP28 MSA, SFF-8636, IEEE 802.3‑2012,CAUI-4 |
Operation Temperature |
0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
• Fiber Matching Rule: Only MPO-12 APC 8° angled OS2 single-mode ribbon fiber can be used; OM3/OM4 multimode fiber or UPC polished MPO cables will trigger link failure and hardware damage.
• Lane Polarity Control: Confirm MPO fiber lane sequence and polarity match before powering on ports; misaligned lanes lead to severe receive power imbalance and continuous packet loss.
• Distance Restriction: Stable performance is only guaranteed within the standard 500m MSA rated range; extended fiber routes bring excess lane skew and optical attenuation.
• Hot-Plug Support: Modules support live insertion and removal; regularly clean MPO APC end faces to eliminate dust-induced signal distortion.
• Operating Environment: Limit deployment to indoor 0°C–70°C data center environments; avoid fully sealed cabinets with poor ventilation causing persistent overheating.
Full Compatibility List & Supported Network Hardware
1. Supported Hardware & Firmware
HYTOPTODEVICE 100G PSM4 QSFP28 fully matches Huawei original mechanical and optical parameters.
Custom VRP EEPROM coding blocks third-party authentication warning pop-ups.
Every batch passes real machine testing to avoid lane imbalance and random link flapping.
Validated Huawei CloudEngine Platforms:
• CloudEngine 12800 / 12800E Core Fabric Switches
• CloudEngine 9800 / 8800 Leaf & Spine Data Center Switches
• CloudEngine 6800 / S9700 Enterprise Aggregation Switches
• CloudEngine S6700 Medium-density Rack Switches
• Huawei rack servers with QSFP28 100G parallel NIC adapters
2. Multi-Brand Cross Compatibility
Built on universal QSFP28 MSA open industry standards.
This Huawei replacement PSM4 optic interoperates with Cisco, Juniper, Dell, H3C, Arista and Mellanox switches.
It fits multi-vendor hybrid cloud fabric and cross-pod colocation interconnection projects.
3. Free Value-Added Services
We offer free Huawei-specific EEPROM reprogramming for all bulk QSFP28 orders.
Custom private label printing and one-step data center deployment support are available.
Every 100G PSM4 transceiver finishes calibration, thermal cycle and 72-hour aging test.
Volume wholesale buyers enjoy tiered discounts to cut overall data center CAPEX cost.
Primary Application Scenarios
• 500m intra-fabric rack-to-rack interconnections inside Huawei leaf-spine architectures
• High-density aggregation trunk links for enterprise cloud and multi-tenant colocation data centers
• Low-latency 100G uplinks connecting ToR switches to AI, HPC and virtualization server clusters
• Inter-pod parallel optical transmission using MPO single-mode ribbon fiber
• Network upgrade projects from legacy 40G parallel optics to 100G PSM4
• Standard 100G to 4×25G breakout network deployment for segmented server bandwidth expansion
• Multi-brand hybrid fabric short-distance interconnection built on MPO cabling infrastructure
Connectivity Solutions(Applications)
1.Leaf-Spine Architecture
Low-loss parallel lanes build stable 500m inter-switch links for Huawei CloudEngine fabrics.
No extra CWDM filters reduce signal attenuation and smooth VM & container east-west traffic.

2. 100G to 100G for Switch-Switch Interconnection
Use existing MPO OS2 ribbon fiber to set up standardized rack trunk lines.
No complicated wavelength planning speeds up data center capacity expansion.

3.100G to 100G for Switch-NIC Connection
Compact MPO APC connector tidies dense cabinet wiring for GPU and HPC server uplinks.
Reserve cabinet space for future 400G parallel optic infrastructure upgrades.

4. 100G to 4×25G Breakout
Four independent optical lanes support MPO breakout cables, splitting one 100G QSFP28 port into four separate 25G SFP28 uplinks to boost port utilization.

The Core Feature
1.Low Power and High-Density Realize 100G Connectivity for Data Center
Max power consumption limited to 3.5W, much lower than CWDM4 and QSFP28 LR4 modules.
Low thermal load prevents hotspots on fully populated high-density switch line cards.
Cut data center cooling energy cost and lower PUE value for long-term 24/7 operation.

2.Verified Host Interoperability
Each batch preloaded with Huawei QSFP28-100G-PSM4 matching EEPROM identity data.
Fully validated across new and legacy CloudEngine switch generations.
Hot plug without unknown transceiver logs, port lock or lane negotiation failure.

3.Comprehensive Factory Testing & Reliable Performance
Each optic undergoes precise optical calibration and alternating high-low temperature cycling.
72-hour full-rate traffic burn-in eliminates early failure risks before shipment.
Built DDM monitoring allows remote real-time fault check to reduce on-site maintenance.

FAQ
Q1: Can HYTOPTODEVICE Huawei QSFP28-100G-PSM4 parallel optic support remote real-time optical parameter reading on CloudEngine switches?
A: Yes. HYTOPTODEVICE Huawei QSFP28-100G-PSM4 fully meets MSA standards with built-in DDM/DOM function, enabling real-time monitoring of transmit power, receive power, operating temperature, laser bias current and supply voltage.
Q2: Will the HYTOPTODEVICE zero-alarm Huawei 100G PSM4 QSFP28 automatically reduce bandwidth when connected to low-speed network ports?
A: No. HYTOPTODEVICE Huawei QSFP28-100G-PSM4 only operates at fixed 100Gbps or 4x25G breakout mode, and there is no automatic speed downshift to 40G or 10G.
Q3: What kind of fiber connector cable should be matched with HYTOPTODEVICE compatible Huawei QSFP28-100G-PSM4 500m single-mode module?
A: HYTOPTODEVICE Huawei QSFP28-100G-PSM4 must be used with female MPO/MTP APC single-mode ribbon cable to guarantee stable 500m signal transmission.
Q4: Which MPO polarity cable is suitable for direct transceiver-to-transceiver links built with HYTOPTODEVICE Huawei 100G PSM4 optics?
A: Standard Type-B Key-Up to Key-Up crossover MPO-12 APC cable is required for point-to-point direct connections using HYTOPTODEVICE Huawei QSFP28-100G-PSM4.
Q5: Why is regular cleaning of MPO end faces essential for stable leaf-spine data center links deployed with HYTOPTODEVICE Huawei 100G PSM4?
A: Extremely critical. Each MPO connector contains multiple fiber cores; tiny dust particles will block an entire 25G lane and generate severe return loss on HYTOPTODEVICE Huawei QSFP28-100G-PSM4.
Q6: What breakout patch cord matches HYTOPTODEVICE Huawei QSFP28-100G-PSM4 to expand 4-channel 25G server uplinks?
A: MPO-APC female to 4x Duplex LC single-mode breakout patch cable works perfectly with HYTOPTODEVICE Huawei QSFP28-100G-PSM4 to realize 100G split transmission.
Q7: What are the core optical distinctions between HYTOPTODEVICE Huawei 100G PSM4 and 100G SR4 QSFP28 transceivers?
A: HYTOPTODEVICE Huawei PSM4 uses 1310nm OS2 single-mode fiber with a 500m transmission limit, while SR4 adopts 850nm OM3/OM4 multimode fiber only up to 100m; the two cannot be optically interconnected.
Q8: How does the power consumption of low-power HYTOPTODEVICE Huawei QSFP28-100G-PSM4 compare with CWDM4 and LR4 optical modules?
A: HYTOPTODEVICE Huawei QSFP28-100G-PSM4 has typical power consumption ≤2.5W and maximum 3.5W, which runs cooler and saves more power than CWDM4 and LR4 multiplexed transceivers.
Q9: What operating temperature ranges are offered for bulk wholesale HYTOPTODEVICE Huawei QSFP28-100G-PSM4 parallel transceivers?
A: Standard HYTOPTODEVICE commercial version supports 0°C to 70°C for indoor data centers, and customized industrial grade (-40°C ~ 85°C) is available for harsh special deployment environments.
Q10: Does HYTOPTODEVICE provide sample testing before bulk Huawei PSM4 QSFP28 module orders?
A: Yes, sample evaluation service is offered for integrators to verify VRP compatibility and link stability before large-volume procurement. HYTOPTODEVICE support sample test, private label, custom EEPROM coding and OEM. compatibility video available upon request.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


