| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QDD-400-CU1M | |
| 2 | Arista Networks | CAB-D-D-400G-1M | |
| 3 | Dell | DAC-Q56DD-400G-1M | |
| 4 | EdgeCore | ET7502-DAC-1M | |
| 5 | Huawei | QSFP-DD-400G-CU1M | |
| 6 | Juniper Networks | QDD-400G-DAC-1M | |
| 7 | Mikrotik | DDQ+DA0001 |
| Huawei |
QSFP-DD-400G-CU1M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP-DD to QSFP-DD | Max Data Rate | 400Gbps |
| Cable Length | 1m (3ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3cd, QSFP-DD MSA, CMIS 4.0 |
| Minimum Bend Radius | 35mm | Application | 400G Ethernet and InfiniBand EDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP-DD port must enable 400GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.sharp bends degrade 400G PAM4 signals and trigger link errors.
Port Installation Standard: Works only with standard QSFP-DD 400G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 400G QSFP-DD DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.







Q1: Will this Huawei-coded 400G QSFP-DD DAC be recognized normally in multi-vendor data center fabrics? A1: Recognition depends on EEPROM programming. As a supplier of 400g dac cable for data center, HYTOPTODEVICE provides single or dual-vendor coding options. With matched coding, it works seamlessly on most MSA-compliant QSFP-DD platforms.
Q2: Is a QSFP-DD cable backward compatible with older QSFP28 (100G) or QSFP56 (200G) ports? A2: Physically, QSFP-DD ports are designed to accept older QSFP28 or QSFP56 modules with certain physical and software limitations. However, this 400G QSFP-DD DAC cannot operate when inserted into legacy 100G/200G ports because of mismatched form factor and electrical lane definition.
Q3: Does adopting third-party Huawei compatible 400G DAC cable invalidate the warranty of Huawei network hardware? A3: It will not automatically void your Huawei switch or NIC warranty. Our HYTOPTODEVICE passive DAC cable complies with MSA and IEEE 802.3ck standards. Hardware vendors only deny warranty claims when cable defects directly cause permanent port damage.
Q4: Can I connect different brands of network interface cards (NICs) on each end of the cable? A4: Yes, provided each end is correctly coded or compatible with the respective hardware requirements of the connected servers or switches. HYTOPTODEVICE offers dual-sided custom EEPROM coding service to support mixed-brand NIC interconnection for bulk deployments.
Q5: Does this Huawei compatible 400G QSFP-DD DAC support standard auto-negotiation for data center Ethernet links? A5: Yes. This HYTOPTODEVICE passive DAC cable supports IEEE auto-negotiation. The negotiation function is managed by the switch or NIC firmware instead of the passive copper cable itself.
Q6: What is the maximum stable transmission distance for our passive 400G QSFP-DD DAC used in data center? A6: Our maximum supported length for passive 400G QSFP-DD copper twinax is 3 meters. HYTOPTODEVICE supplies 0.5m, 1m, 2m and 3m variants; passive copper cannot preserve 400G PAM4 signal integrity beyond 3m.
Q7: How does latency of 400G passive DAC compare with fiber links for Huawei data center leaf-spine networks? A7: 400G copper DAC delivers lower latency than fiber links. Electrical signals travel faster in copper than light through glass fiber, and DAC removes extra transceiver chip latency. Our 400g dac cable for data center is ideal for low-latency AI and HPC workloads.
Q8: What wire gauge (AWG) is typically used in 400G QSFP-DD cables? A8: Short lengths including 0.5m and 1m use 30AWG for better flexibility. 2m and 3m versions adopt 28AWG to minimize signal attenuation. HYTOPTODEVICE matches the proper AWG for every length to stabilize 400G PAM4 signal transmission.
Q9: Can this Huawei 400G QSFP-DD DAC sustain continuous full line-rate traffic in busy data center environments? A9: Yes, within rated length and proper operating environment. Every HYTOPTODEVICE passive DAC cable passes line-rate burn-in testing, supporting sustained 400G line-rate traffic with zero packet loss.
Q10: Can this Huawei compatible 400G DAC be re-coded for InfiniBand NDR besides Ethernet for data center use? A10: It relies on EEPROM setup and host configuration. HYTOPTODEVICE can program this 400G QSFP-DD DAC for Ethernet or InfiniBand NDR; kindly specify your transmission mode when placing bulk orders.
Q11: What latch mechanism is fitted on the QSFP-DD connectors of this Huawei 400G DAC cable? A11: It uses standard bail-clasp pull-tab latches. This mainstream design from HYTOPTODEVICE enables easy, tool-free plugging and unplugging without scratching or damaging switch ports.
Q12: Is this 1m passive 400G DAC suitable for cross-rack interconnection in large data center layouts? A12: Not recommended for regular cross-rack deployment. Our passive 400G twinax max reach is 3m, only suitable for adjacent racks. Longer cross-rack connections need 400G AOC fiber cables.
Q13: Can I request custom jacket colors for large data center bulk orders of Huawei QSFP-DD-400G-CU1M compatible DAC cables? A13: Standard jacket color is black. HYTOPTODEVICE supports custom jacket colors for bulk OEM orders, you can submit color requirements alongside EEPROM coding requests before production.
Q14: What troubleshooting steps should be taken if this Huawei 400G DAC fails to bring up link in a data center network? A14: The link will stay down and the VRP system may log link failure alerts. Check connector seating, confirm EEPROM coding matches your Huawei hardware, and inspect for over-bending. HYTOPTODEVICE technical team can assist with link debugging.
Q15: Why is passive 400G DAC a cost-effective cabling choice for short-range data center fabric? A15: Passive DAC contains no laser chips, photodiodes or optical components. As a professional provider of 400g dac cable for data center, HYTOPTODEVICE builds these cables with copper and shielding materials, cutting hardware cost compared to optical modules.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




