• HYTOPTODEVICE HPE ProCure J9152A compatible SFP+ 10G LRM transceiver 10GBASE‑LRM 1310nm 220m multimode LC DDM fiber optic module
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale HPE ProCure switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for HPE ProCure switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for switch
  • HYTOPTODEVICE HPE ProCure J9152A compatible SFP+ 10G LRM transceiver 10GBASE‑LRM 1310nm 220m multimode LC DDM fiber optic module
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale HPE ProCure switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for HPE ProCure switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for switch

HPE BladeSystem 455889-B21 Compatible SFP+ 10G LRM Transceiver | 10GBASE-LRM 1310nm 220m MMF Bulk & Wholesale | HYTOPTODEVICE

HYTOPTODEVICE drop‑in replacement for HPE ProCure J9152A SFP+ 10G LRM module, 10.3125Gbps 1310nm 10GBASE‑LRM, supports OM1‑OM4 multimode fiber up to 220m, duplex LC interface, SFF‑8472 DDM monitoring. Pre‑programmed HPE‑specific EEPROM, bulk wholesale and private‑label services for campus and data‑center network integrators.
Price: From $1.00 (Bulk Quote Available) | In Stock

NO. Brand  Compatible P/N Remarks
1 Cisco SFP-10G-LRM 
2 Arista Networks  SFP-10G-LRM 
3  H3C  SFP-XG-LRM-MM1310 
4 HPE ProCure J9152A
5 HPE Aruba J9152D
6 HPE BladeSystem 455889-B21
7 Huawei  OSXD22N00 
8 Dell 330-2403 
9 Juniper  EX-SFP-10GE-LRM
10 Brocade  10G-SFPP-LRM 



Description

 HPE BladeSystem 455889-B21 Compatible SFP+ 10G LRM Transceiver | 10GBASE‑LRM 1310nm 220m MMF Bulk Wholesale

Product Overview

HYTOPTODEVICE SFP+ 10G LRM module acts as drop‑in compatible replacement for HPE Aruba J9152D, delivering stable 10‑gigabit performance over legacy multimode fiber for Aruba enterprise and data‑center switches. This SFP+ 10G LRM module operates at 1310 nm and delivers maximum 220‑meter transmission distance across OM1‑OM4 multimode fiber, a practical solution for campus and data‑center 10G upgrades without overhauling existing multimode cabling.
This MSA‑compliant 10GBASE‑LRM SFP+ optical transceiver uses FP laser design with duplex LC connectors. It meets IEEE 802.3aq, SFF‑8431 and SFF‑8472 industry standards, equipped with DDM real‑time diagnostic monitoring for quick fiber‑side fault troubleshooting.
Every HYTOPTODEVICE SFP+ 10G LRM module comes pre‑flashed with Aruba‑optimized EEPROM data, eliminating unsupported‑transceiver alerts and unexpected port shutdown risks. Low‑power architecture reduces thermal pressure inside high‑density racks. Well‑suited for data‑center refresh, campus backbone links and bulk purchasing for system integrators and overseas resellers.

Key Technical Specifications
 
 HPE BladeSystem Compatible   455889-B21  Vendor Name HYTOPTODEVICE
Form Factor SFP+ Max Data Rate 10.3125Gbps
Wavelength 1310nm Max  Distance 220m@OM3/300m@SMF
Connector Duplex LC Transmitter Type 1310nm FP
Cable Type 50/125µm@OM3 MMF, 9/125μm@SMF Receiver Type PIN
TX Power -6.5~-0.5dBm Receiver Sensitivity < -10.0dBm
Power Consumption ≤1W Receiver Overload 1.5dBm
Protocols IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber Compatibility: Supports OM1–OM4 multimode and OS2 single-mode fiber (max 220 m). A Mode Conditioning Patch Cord (MCP) is mandatory on the TX port for legacy OM1/OM2 fiber to prevent signal degradation.

  • Maintenance & Polarity: Clean LC connectors before insertion to avoid signal loss. Ensure correct polarity—always map the MCP single-mode leg to the TX port.

  • Distance & Link Budget: Maximum distance is strictly 220 m across all fiber types. Excessive splices, patch panels, or sharp bends will reduce range.

  • Thermal Management: Power consumption is ≤1W , operating standardly at 0°C to 70°C without auxiliary cooling.

  • Industrial Grade Option: For outdoor or harsh environments with extreme temperatures, select industrial-grade (-40°C to 85°C) modules.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
HYTOPTODEVICE SFP+ 10G LRM module matches mechanical dimension and optical performance of original HPE Aruba J9152D. Custom‑calibrated EEPROM suppresses third‑party transceiver warning logs. Each production batch passes real‑hardware traffic testing on genuine Aruba hardware to avoid signal distortion and unstable link behaviors.

Validated HPE Aruba Platforms:

• Aruba 3810M / 5400R zl2 campus switch series
• Aruba 2930F / 2930M enterprise switch families
• Aruba CX aggregation and data‑center switch platforms
• Aruba‑compatible SFP+ server NIC ports

2. Multi-Brand Cross Compatibility

Built upon universal SFP+ MSA specification, HYTOPTODEVICE SFP+ 10G LRM transceiver maintains stable operation across Cisco, Arista, Juniper, Dell, HPE and other mainstream network hardware. Well‑suited for multi‑vendor mixed‑fabric environments, intra‑data‑center short‑reach interconnections and mixed‑fiber cabling renovation projects.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

• Intra‑data‑center links re‑using existing legacy multimode cabling
• Cost‑effective 10G infrastructure upgrade without cable replacement
• Short‑reach 10G uplink connections for aggregation and top‑of‑rack switches inside enterprise premises
• Bulk supply for global optical‑component distributors and system integration partners
• Multi‑vendor hybrid data‑center rack‑to‑rack fiber interconnections

Connectivity Solutions(Applications)

1. 10G to 10G for Switch-Switch Interconnection
Establish low‑latency reliable 10G trunk links between HPE Aruba core and aggregation switches. The 1310 nm FP laser maintains stable signal quality for legacy multimode cabling, supports heavy east‑west data traffic and simplifies dense LC patch‑cord management.

10G‑to‑10G switch‑to‑switch trunk built with HPE Aruba‑compatible SFP+ 10G LRM transceiver over multimode fiber

2.10G for Switch-Media Converter

This HPE Aruba‑compatible SFP+ 10G LRM transceiver builds stable short‑haul fiber links between HPE Aruba switches and local optical media converters inside data‑center buildings. It enables 10‑gigabit upgrade for sites with older installed multimode infrastructure.

Fiber interconnection using SFP+ 10G LRM transceiver between HPE Aruba switch and media converter within data‑center premises

3.10G for Switch to NIC

Deploy HYTOPTODEVICE SFP+ 10G LRM transceiver on HPE Aruba TOR switches and server SFP+ NICs for rack‑to‑rack interconnection. Compact SFP+ footprint improves port density; low‑power characteristic prevents rack overheating under full‑port populated conditions.

10G uplink from HPE ProCure top‑of‑rack switch to server SFP+ NIC using multimode fiber plant

4.10G Structured Cabling Deployment

10GBASE‑LRM design fits perfectly with existing enterprise structured LC fiber infrastructure. Compatible with centralized fiber distribution frames, it supports expandable on‑premises network growth and reserves smooth upgrade paths toward future higher‑speed generations.

Enterprise multimode LC structured cabling deployment with mass‑installed SFP+ 10G LRM transceiver modules

The Core Feature 

1.10G High-Density & Ultra-Low Power Connectivity

Low‑power high‑density SFP+ 10G LRM transceiver delivers budget‑friendly 10‑gigabit upgrade paths for HPE Aruba‑centered networks. It lets operators reuse existing older multimode cabling for incremental network expansion.

Power‑saving high‑density SFP+ 10G LRM transceiver for multimode fiber reuse in  data‑center 10G upgrade


2.
Verified Host Interoperability

Every production batch of HYTOPTODEVICE SFP+ 10G LRM module completes physical interoperability tests against Aruba AOS‑CX / AOS‑S firmware and other mainstream network operating systems. Pre‑calibrated EEPROM eliminates unauthorized‑transceiver warning logs, delivering consistent plug‑and‑play reliability for bulk‑order clients.
Real‑hardware interoperability lab validation for HPE ProCure‑compatible SFP+ 10G LRM module

3.Rigorous Testing, Uncompromising Reliability

All SFP+ 10G LRM transceiver units pass fiber‑link simulation, high‑low temperature cycling and 72‑hour full‑rate traffic burn‑in tests. Precision optical‑power calibration optimizes signal performance for legacy multimode media. Built‑in DDM monitoring enables remote early‑fault identification for non‑stop 24/7 intra‑data‑center backbone operation.

72‑hour full‑rate traffic burn‑in reliability screening for bulk batches of SFP+ 10G LRM transceiver

 

Frequently Asked Questions


Q1: What practical advantage does HYTOPTODEVICE SFP+ 10G LRM module bring for enterprise networks with outdated multimode fiber infrastructure?
A: HYTOPTODEVICE SFP+ 10G LRM module enables enterprises to implement 10G links while re‑using existing OM1‑OM4 multimode cabling. It lowers overall project spending for campus and data‑center 10G roll‑outs without expensive cable replacement work.

Q2: Which laser wavelength is implemented inside HYTOPTODEVICE HPE Aruba J9152D compatible SFP+ 10G LRM module?
A: Our HYTOPTODEVICE replacement SFP+ 10G LRM module adopts 1310 nm laser wavelength, complying with formal 10GBASE‑LRM specifications built for multimode‑based 10G transmission.

Q3: From real‑world deployment perspective, what makes SFP+ 10G LRM module different from standard 10GBASE‑SR optical transceivers?
A: Our HYTOPTODEVICE SFP+ 10G LRM module achieves up to 220 m multimode reach at 1310 nm, targeting long‑distance campus aggregation links. 10GBASE‑SR uses 850 nm wavelength and is limited to short intra‑rack connections.

Q4: Even sharing identical 1310 nm wavelength, what fundamental difference exists between SFP+ 10G LRM module and 10GBASE‑LR transceivers?
A: HYTOPTODEVICE SFP+ 10G LRM module is designed exclusively for multimode fiber environments. 10GBASE‑LR works only over single‑mode fiber. Matching wavelength cannot make them interchangeable across different fiber medium types.

Q5: For campus‑wide 10G modernization projects, why would network engineers prefer SFP+ 10G LRM module over SR‑style optics?
A: For campus sites with long‑distance legacy multimode cable runs, our HYTOPTODEVICE SFP+ 10G LRM module delivers superior reach compared to SR alternatives. It protects existing cabling investment and avoids costly cable re‑pulling tasks.

Q6: What function does a mode‑conditioning patch cord serve when deploying SFP+ 10G LRM module on aged multimode fiber lines?
A: Mode‑conditioning patch cords optimize laser launch behavior entering legacy multimode fiber. When paired with HYTOPTODEVICE SFP+ 10G LRM module, they reduce modal distortion especially for OM1 / OM2 cables approaching the 220‑meter maximum distance limit.

Q7: How do qualified SFP+ 10G LRM module products minimize DMD‑caused signal degradation on older multimode fiber links?
A: HYTOPTODEVICE SFP+ 10G LRM module uses restricted‑mode laser launch technology. This mechanism suppresses differential mode delay (DMD), maintaining signal integrity for 10G traffic transmitted over aged multimode fiber infrastructure.

Q8: What receiver‑sensitivity performance can network operators expect from HYTOPTODEVICE HPE Aruba‑compatible SFP+ 10G LRM module under normal working conditions?
A: Our HYTOPTODEVICE SFP+ 10G LRM module meets official 10GBASE‑LRM industry specs with typical ‑12.5 dBm receiver sensitivity, ensuring stable signal reception across all valid multimode link distances within specification.

Q9: What workflow should network technicians follow to calculate accurate link‑budget values for on‑site SFP+ 10G LRM module multimode fiber links?
A: When computing link budget for HYTOPTODEVICE SFP+ 10G LRM module deployments, subtract fiber attenuation, connector loss and splice loss from total optical power budget. Keep cumulative loss inside power margin and never exceed the 220 m maximum reach limit.

Q10: Can administrators build stable 10G connectivity by mixing SFP+ 10G LRM module with 10GBASE‑SR transceiver on opposite sides of the fiber link?
A: Mixed‑transceiver deployment cannot create valid 10G Ethernet links. HYTOPTODEVICE SFP+ 10G LRM module and 10GBASE‑SR use different laser wavelengths and launch profiles. Both fiber ends need matching 10G LRM transceivers for normal operation.

Q11: Is it possible to run HYTOPTODEVICE SFP+ 10G LRM module inside 25G‑capable SFP28 switch ports?
A: The SFP+ form factor physically fits SFP28 slots. Most modern network hardware supports rate fallback down to 10Gbps. Some Aruba AOS‑CX / AOS‑S firmware versions require manual port‑speed adjustment; validate firmware behavior before production deployment.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • HYTOPTODEVICE HPE ProCure J9152A compatible SFP+ 10G LRM transceiver 10GBASE‑LRM 1310nm 220m multimode LC DDM fiber optic module
  • Low‑energy SFP+ 10G LRM transceiver for large‑scale HPE ProCure switch deployment over multimode cables
  • Pre‑coded zero‑warning SFP+ 10G LRM transceiver built for HPE ProCure switching platforms with multimode infrastructure"
  • hytoptodevice sfp+ 10g lrm module 1310nm 220m smf for switch
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download