| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-100G-ER4L-S | |
| 2 | Arista Networks | QSFP-100G-ERL4 | |
| 3 | Dell | Q28-100G-ER4-lite | |
| 4 | Huawei | QSFP-100G-ER4-Lite | |
| 5 | Juniper Networks | QSFP-100G-ER4L | |
| 6 | Ruijie Networks | 100G-QSFP-ER4-SM1310 | |
| 7 | HPE Aruba | JL743A | |
| 8 | Brocade | 100G-QSFP28-ER4-40KM | |
| 9 | Ciena | XCVR-Q30V31 | |
| 10 | EdgeCore | ET7402-ER4 |
| HPE Aruba Compatible | JL743A | Vendor Name | HYTOPTODEVICE |
| Form Factor | QSFP28 | Max Data Rate | 103.125Gbps |
| Wavelength | 4 x LAN WDM (1295、1300、1305、1310nm) | Max Distance | 30km without FEC 40km with FEC |
| Connector | Duplex LC | Transmitter Type | 4 x LAN WDM EML |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | -2.5~+4.5dBm | Receiver Sensitivity | <-16.9dBm without FEC <-20.9dBm with FEC |
| Protocols | 100G Ethernet, MSA Compliant | Power Consumption | < 4.0W |
Usage Guidelines & Best Practices
Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm CWDM4 module.
Optical Attenuator Required for Short Links: For testing or short-distance connections (<15km), connect a 10dB–15dB optical attenuator to the RX port to prevent damaging the receiver.(15KM
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.
Operating Environment: 0°C–70°C commercial temperature range. Ensure cabinet ventilation to avoid optical power attenuation from overheating.
Full Compatibility List & Supported Network Hardware
1.Native HPE Aruba Compatibility


The Core Features
1.Broad 100G Data Center Applicationg
Supports reliable, high-efficiency long-haul data transmission between core and spine network layers, fully satisfying deployment requirements for large-scale data centers.
2. 100G High-Speed Data Center Connectivity

3. Host-Tested for Proven Interoperability
Every module undergoes rigorous compatibility validation on target host switches, ensuring stable, error-free operation in your live network environment.Specific Compatibility Video available upon request.


Q1: Can this 100G QSFP28 ER4 Lite transceiver work normally when inserted into QSFP+ 40G ports on HPE Aruba devices? A: No, this HPE Aruba‑compatible 100GBASE‑ER4L transceiver features a fixed 100Gbps operating rate and does not support downward auto‑negotiation to 40G. Installing it on a 40G QSFP+ port will cause link failure. Normal operation requires a native 100G QSFP28 port on HPE Aruba switches or routers.
Q2: What is the practical difference between 100GBASE‑ER4 Lite and full‑spec 100GBASE‑ER4 optical modules? A: 100GBASE‑ER4 Lite provides 40km max reach with lower power consumption, while full‑spec ER4 supports longer distance with higher power draw. ER4 Lite is cost‑optimized for 40km metro scenarios. No cross‑interoperability guarantee, you need to match the exact standard for your HPE Aruba link deployment.
Q3: Does this long‑reach HPE Aruba optic support duplex OS2 single‑mode fiber transmission? A: Yes. Adopting LAN‑WDM wavelength multiplexing technology, this transceiver realizes bidirectional 100G data transmission over two OS2 single‑mode fiber cores. It delivers high‑capacity backbone bandwidth, and is highly suitable for HPE Aruba long‑distance point‑to‑point enterprise and metro network links.
Q4: Can I use multimode fiber for this 40km 100G QSFP28 ER4 Lite long‑haul transmission? A: No. This 40km long‑reach module is exclusively designed for OS2 single‑mode fiber. Multimode fiber has large dispersion and high signal loss, which cannot support stable 100G long‑distance transmission over 40km, easily causing packet loss and link dropout.
Q5: Why adopt LAN‑WDM 1310nm band for 40km HPE Aruba network links? A: The 1310nm LAN‑WDM wavelength window features low fiber attenuation, delivering excellent long‑distance transmission performance. It ensures stable and low‑loss signal transmission for 40km ultra‑long enterprise and metro backbone links.
Q6: Is additional optical attenuation processing required when using this 40km module for short‑distance links under 10km? A: Yes. This 40km long‑reach QSFP28 module has relatively high transmit optical power, our TX output ranges from ‑2.5~+4.5dBm and receiver overload threshold is ‑3.5dBm. Direct use on very short links will exceed receiver overload threshold and overload the receiver. It is necessary to equip 10‑15dB duplex LC optical attenuators for power matching to ensure stable short‑distance operation.
Q7: How does chromatic dispersion affect the signal quality of 40km dual‑fiber 100G links? A: Long‑distance fiber transmission inevitably produces chromatic dispersion, which broadens optical pulses and increases bit error rates. This JL743A‑compatible QSFP28 ER4 Lite module is pre‑tested and optimized for LAN‑WDM dispersion budgets, perfectly adapting to 40km OS2 fiber transmission and maintaining ultra‑low bit error rate and stable link status.
Q8: What risks does excessive input optical power bring to this HPE Aruba QSFP28 transceiver? A: The built‑in high‑sensitivity receiver is vulnerable to damage from excessive input optical power. Unattenuated short‑link testing is the main cause of module burnout. Standard power‑matching construction can effectively avoid hardware damage and extend module service life.
Q9: What working temperature environment is suitable for this HPE Aruba compatible optical module? A: The standard commercial‑grade module supports stable operation at 0°C to 70°C, adapting to conventional indoor HPE Aruba equipment cabinet environments. For outdoor base stations, industrial sites and other harsh scenarios, customized industrial‑grade (-40°C ~ +85°C) modules are available.
Q10: Does this transceiver comply with universal industry standards for HPE Aruba network adaptation? A: Yes. This 100GBASE‑ER4L QSFP28 transceiver fully complies with IEEE and QSFP28 MSA industry standards. It supports complete DDM/DOM real‑time monitoring and standard QSFP28 mechanical specifications, ensuring universal compatibility and stable operation on mainstream HPE Aruba network devices.
Q11: Does this bulk wholesale optical module have complete qualification certifications? A: Yes. All HYTOPTODEVICE 100G 40km QSFP28 ER4 Lite modules pass CE, FCC and RoHS environmental compliance certifications. Complete test reports and certification documents can be provided to support customer customs clearance, project audit and batch procurement verification.
Q12: What after‑sales support is available for faulty modules in bulk deployment? A: We support long‑term warranty and fast replacement services for bulk orders. Sufficient spot inventory ensures rapid global shipment and after‑sales replacement. Global integrators and distributors can enjoy exclusive stock reservation and priority after‑sales support for key projects.
Q13: What is the standard maintenance cycle for this 40km long‑haul optical module? A: It is recommended to clean the duplex LC optical port before installation to remove dust and impurities. For long‑term running 40km long‑haul links, perform port cleaning and link loss inspection every 6–12 months to avoid increased insertion loss and signal attenuation caused by port contamination.
Q14: Can this 40km QSFP28 ER4 Lite module be used for 25‑30km cross‑building data center interconnection? A: Absolutely. With a maximum reach of 40km, this module has sufficient optical power margin to fully cover 25‑30km data center cross‑room interconnection scenarios. It can resist signal loss caused by fiber splicing and connector docking, realizing stable 100G high‑bandwidth long‑distance interconnection.
Q15: Is this transceiver applicable to leased dark fiber links of telecom operators? A: Yes. This standard MSA‑compliant QSFP28 ER4 Lite module is perfectly compatible with operator leased OS2 dark fiber. It supports metro aggregation and long‑distance branch interconnection services. Our technical team can assist in link budget calculation to match different fiber loss environments.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




