H3C SFP-H10GB-CU5M Compatible 10GB SFP+ DAC Cable 5m | 10GBASE-CU Passive Twinax Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE H3C SFP-H10GB-CU5M compatible 10GB SFP+ DAC cable serves as a direct drop-in replacement for the original H3C 5m 10G passive twinax DAC. It complies with SFF-8431 and 10GBASE-CU MSA standards. As a reliable manufacturer with stable inventory supporting wholesalers, distributors and resellers, we enable buyers to purchase and procure dependable 10gb sfp+ dac cable with ultra-low latency 10Gbps transmission. This twinax cable fits H3C rack trunk, server uplink and intra-rack IRF stacking links.
It comes pre-programmed with H3C EEPROM signature for plug-and-play deployment and helps avoid transceiver warning alerts on H3C switching platforms. HYTOPTODEVICE supports bulk buying, sample testing, OEM private label and fast shipment for distributors, resellers and system integrators.
Key Technical Specifications
| H3C Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
5m (16.4ft) |
Wire AWG |
AWG 24 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
30mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target Cisco hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated H3C Hardware & Firmware
This 10gb sfp+ dac cable is preloaded with H3C EEPROM data, supports alarm-free plug-and-play on H3C network hardware. Every cable passes target device testing before leaving our factory:
• H3C S5570S-EI, S5130S-EI access & aggregation switches
• H3C S6510 series leaf-spine data center switches
• H3C S10500X-G core chassis switches
• H3C server SFP+ NIC and converged network adapters
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this 10gb SFP+ DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• H3C switch to server 10G rack trunk uplink
• Intra-rack H3C IRF switch stacking interconnection
• Leaf-spine fabric short-range interconnection
• Virtualization cluster and storage fabric interconnection
• Stock sourcing and bulk purchase for distributors, wholesalers and network resellers
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the 10gb SFP+ DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive 10gb SFP+ DAC draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: As a H3C networking reseller, can this compatible 10gb sfp+ dac cable connect multi-brand switches for my enterprise customers?
A: Yes, this HYTOPTODEVICE 10gb sfp+ dac cable supports cross-brand interconnection if both sides follow the 10GBASE-CU MSA standard. Consistent port configuration ensures stable cross-vendor links between H3C and other brand hardware.
Q2: When wholesalers procure these twinax cables for future H3C network upgrade projects, can the EEPROM signature be re-programmed later?
A: Yes, HYTOPTODEVICE offers EEPROM reprogramming service for our bulk 10gb sfp+ dac cable. We provide coding tools for distributors to rewrite signatures when end customers migrate to new network hardware platforms.
Q3: Will buying third-party 10gb sfp+ dac cable void the original hardware warranty on H3C campus and data center switches?
A: Generally no, third-party compliant 10G DACs like our HYTOPTODEVICE 5m H3C compatible twinax cable will not automatically void OEM warranty. Hardware damage caused by faulty DACs will be excluded, while normal interoperability use stays covered.
Q4: For dense server rack builds, should distributors consider 24AWG twinax as an alternative to our standard 30AWG 10gb sfp+ dac cable?
A: Yes, 24AWG DAC cables have larger outer diameter and less flexibility than our standard 30AWG HYTOPTODEVICE 10gb sfp+ dac cable. Thicker conductors bring better signal reach but increase routing difficulty in cramped high-density rack spaces.
Q5: Can end customers run this passive 10gb sfp+ dac cable across separate rack cabinets after dealers receive the stocked goods?
A: No, passive twinax DAC cables such as our HYTOPTODEVICE 10GBASE-CU cable are designed for indoor intra-rack use only. They lack outdoor-rated jacket and flame ratings required for wall penetration or exposed outdoor runs.
Q6: For 5-meter rack links ordered by H3C project buyers, is active DAC a better option than passive 10gb sfp+ dac cable?
A: No, passive DAC is preferred for runs under 7 meters, including our 5m HYTOPTODEVICE H3C compatible 10gb sfp+ dac cable. Passive types consume <0.1W with simpler structure while active DAC adds signal amplification with extra power draw and higher cost.
Q7: Which cabling choice helps distributors cut project expenses for H3C clients: 10gb sfp+ dac cable or fiber paired with standalone SFP+ optics?
A: 10gb sfp+ dac twinax cable is more cost-effective for short intra-rack links, and our HYTOPTODEVICE bulk 10gb sfp+ dac pricing beats the combined cost of transceivers plus fiber patch cords. Fiber becomes economical only for distances over 7–10 meters.
Q8: Will the stocked 10gb sfp+ dac cable that wholesalers supply deliver lower latency than fiber or RJ45 copper connections?
A: Yes, 10G passive twinax DAC delivers lower latency than fiber and 10G RJ45 copper. Our HYTOPTODEVICE 10gb sfp+ dac cable removes optical conversion steps, cutting latency to sub-nanosecond levels for low-latency trading and HPC clusters.
Q9: Can this stocked 10gb sfp+ dac cable auto-downshift speed to connect legacy 1G switches for old campus network upgrades?
A: No, our 10GBASE-CU 10gb sfp+ dac cable locks to 10G rate. 10GBASE-CU standard does not support auto-negotiation fallback to 1G or 100M, so both connected ports must be set manually to 10G.
Q10: What thermal specs should resellers verify before purchasing 10gb sfp+ dac cable for hot aisle H3C data center deployments?
A: Our standard commercial-grade HYTOPTODEVICE 10gb sfp+ dac cable runs 0℃ ~70℃. For hot aisles or industrial racks, we supply industrial temperature variants rated -40℃ ~85℃ for stable continuous operation.
Q11: How many hot-plug cycles can the SFP+ pull tab endure, which is critical for dealers supporting frequent H3C equipment maintenance?
A: The pull tab and latch on HYTOPTODEVICE 10gb sfp+ dac cable are tested for over 500 hot-plug cycles. Reinforced plastic tabs prevent breakage during frequent re-cabling inside dynamic data center environments.
Q12: Can the 10gb sfp+ dac cable purchased from wholesale inventory operate normally when plugged into legacy 1G SFP ports?
A: No, 10G SFP+ DAC cannot negotiate or work on a native 1G SFP port. Our HYTOPTODEVICE 10GBASE-CU 10gb sfp+ dac cable requires SFP+ 10G-capable ports on both ends to establish a link.
Q13: Why do generic uncoded twinax DACs fail link negotiation and IRF stacking on H3C switches after dealers deliver to customers?
A: This usually comes from mismatched EEPROM signature. Our HYTOPTODEVICE H3C SFP-H10GB-CU5M compatible 10gb sfp+ dac cable can be pre-coded with H3C signature to work smoothly with H3C switches and bypass identity checks for stable link activation.
Q14: What performance validation tests are carried out on stocked 10gb sfp+ dac cable before shipment of wholesale dealer orders?
A: You can verify compliance by BER testing, insertion loss and return loss measurement. Every HYTOPTODEVICE bulk 10gb sfp+ dac cable passes target switch testing and MSA SFF-8431 validation before shipment.
Q15: What diagnostic details can DDM/DOM output for the passive 10gb sfp+ dac cable we supply to our H3C dealer network?
A: DDM/DOM is digital diagnostic monitoring for transceiver parameters, and our HYTOPTODEVICE 10gb sfp+ dac cable supports basic DDM readout. Passive DACs report cable and identity data but do not monitor optical power values.
Q16: What BER performance benchmark should wholesalers specify for 10gb sfp+ dac cable deployed in production H3C data center environments?
A: The target BER for stable 10GBASE-CU DAC links is ≤1×10⁻¹². All HYTOPTODEVICE 10gb sfp+ dac cable are tested to hit this BER threshold to eliminate CRC errors for 24/7 data center operation.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

