| NO. | Brand | Compatible P/N | Transceive Type |
| 1 | Cisco | SFP-H25G-CU3M | |
| 2 | Arista Networks | CAB-S-S-25G-3M | |
| 3 | Dell | DAC-SFP-25G-3M | |
| 4 | H3C | SFP-25G-D-CAB-3M | |
| 5 | Juniper | JNP-25G-DAC-3M | |
| 6 | NVIDIA(Mellanox) | MCP2M00-A003 | |
| 7 | HPE Aruba | JL488A | |
| 8 | HPE | 844477-B21 |
| H3C Compatible | SFP-25G-D-CAB-3M | Vendor Name | HYTOPTODEVICE |
| Connector | SFP28 to SFP28 | Max Data Rate | 25Gbps |
| Cable Length | 3m (10ft) | Wire AWG | AWG 26 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000 |
| Minimum Bend Radius | 21mm | Application | 25G Ethernet, Data Center, 5G Wireless |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard SFP28 25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 25G SFP28 Passive DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.






Q1: Can this H3C compatible passive copper twinax cable sustain stable full 25G speed on Comware V9? A: Yes, this HYTOPTODEVICE passive copper twinax cable supports full 25.78125Gbps line rate. It is pre-programmed with H3C EEPROM and validated on Comware for reliable 25GBASE-CR links; RS-FEC is optional for this 3m length.
Q2: What is the maximum reliable working length for this 25G SFP28 passive copper twinax cable? A: The rated maximum reach for 25G SFP28 passive copper twinax cable is 5 meters. This 3m version stays within safe insertion loss budget for standard H3C cabinet wiring.
Q3: Can this passive copper twinax cable connect H3C S6850 switches to NVIDIA ConnectX NICs? A: Cross-brand interconnection works reliably with unified 25GBASE-CR and matched FEC configuration. This passive copper twinax cable follows MSA specs for mixed-vendor HPC fabrics.
Q4: What differentiates SFP28 passive copper twinax cable from older SFP+ twinax DAC? A: SFP28 passive copper twinax cable supports up to 25G bandwidth while SFP+ twinax only reaches 10G. This cable uses SFP28 housing to fit H3C’s modern 25G ports for IRF and leaf-spine.
Q5: What signal issues occur if this passive copper twinax cable runs over the 5-meter rating? A: 25G twinax copper has rapid signal attenuation beyond the limit. Length over 5m brings CRC errors and flapping links; longer distances require AOC active optical cables.
Q6: Which H3C networking scenarios gain the most latency benefit with this passive copper twinax cable? A: IRF stacking, NVMe-oF and HPC RDMA workloads get the biggest advantage. This HYTOPTODEVICE passive copper twinax cable maintains consistent ultra-low latency.
Q7: Can this 3m passive copper twinax cable be used for direct server-to-server point-to-point links? A: Direct server interconnection is fully supported after proper port configuration. This passive copper twinax cable works well for storage sync inside H3C blade and rack server cabinets.
Q8: How does AWG wire gauge affect signal performance for a 3m passive copper twinax cable? A: 30AWG balances flexible routing and acceptable signal loss for 3m runs; 26AWG delivers better loss margin near the 5m boundary. This cable uses 30AWG twinax optimized for H3C high-density racks.
Q9: Will Comware firmware upgrades affect switch recognition of this passive copper twinax cable? A: MSA-compliant passive copper twinax cable stays compatible across mainstream Comware releases. Preloaded H3C EEPROM guarantees stable detection after firmware updates.
Q10: When should AOC fiber replace passive copper twinax cable in H3C fabric planning? A: Select active optical cables for cross-rack links or distances longer than 5 meters. Passive copper twinax cable is zero-power and cost-effective for in-rack 25G connections.
Q11: How much latency reduction can passive copper twinax cable deliver compared with fiber transceiver links? A: Passive copper twinax cable cuts roughly 30–60ns latency by removing optical-electrical conversion. This saving benefits low-latency storage and compute traffic.
Q12: Can this SFP28 passive copper twinax cable negotiate 25G on legacy 10G SFP+ H3C ports? A: 25G negotiation cannot complete on SFP+ ports due to different electrical specifications. Both ports must be native SFP28 to run this passive copper twinax cable at full speed.
Q13: Can QSFP28 breakout 4×25G DAC substitute this SFP28 passive copper twinax cable on H3C SFP28 ports? A: Breakout DAC uses separate pin mapping and split logic. It cannot replace this standard point-to-point SFP28 passive copper twinax cable.
Q14: What compatibility validation tests does HYTOPTODEVICE perform on this passive copper twinax cable before shipment? A: Each batch runs BER scanning, link-up and hot-swap validation on H3C S6850 and S6825 platforms. Testing verifies EEPROM reading and steady 25G signal performance.
Q15: What deployment limits should bulk buyers note for passive copper twinax cable in H3C fabric design? A: Passive copper twinax cable is designed only for short intra-rack copper connections. It is not suitable for inter-row or long-distance cross-room transmission.
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




