• HYTOPTODEVICE manufacturer supply  QSFP-40G-ER4 compatible 40G QSFP+ ER4 transceiver, bulk wholesale custom EEPROM programming private label for global distributor and network integrator
  • HYTOPTODEVICE manufacturer supply QSFP-40G-ER4 compatible 40G QSFP+ ER4 transceiver, bulk wholesale custom EEPROM programming private label for global distributor and network integrator
  • Bulk wholesale low MOQ hytoptodevice compatible 40G ER4 QSFP+ transceiver, factory direct supply for global distributor, system integrator and network buyer
  • HYTOPTODEVICE factory 40km 40G QSFP+ ER4 optical module with custom EEPROM programming, OEM service for overseas bulk network project procurement
  • HYTOPTODEVICE manufacturer supply  QSFP-40G-ER4 compatible 40G QSFP+ ER4 transceiver, bulk wholesale custom EEPROM programming private label for global distributor and network integrator
  • HYTOPTODEVICE manufacturer supply QSFP-40G-ER4 compatible 40G QSFP+ ER4 transceiver, bulk wholesale custom EEPROM programming private label for global distributor and network integrator
  • Bulk wholesale low MOQ hytoptodevice compatible 40G ER4 QSFP+ transceiver, factory direct supply for global distributor, system integrator and network buyer
  • HYTOPTODEVICE factory 40km 40G QSFP+ ER4 optical module with custom EEPROM programming, OEM service for overseas bulk network project procurement

H3C QSFP-40G-ER4-WDM1300 Compatible QSFP+ 40G ER4 Transceiver | 40GBASE-ER4 1310nm(CWDM4)40km Duplex LC SMF Bulk & Wholesale | HYTOPTODEVICE

Factory manufacturer supplies H3C QSFP-40G-ER4-WDM1300 compatible QSFP+ 40G ER4 transceiver. 40GBASE-ER4 1310nm CWDM4, 40km OS2 single-mode duplex LC. Bulk & wholesale, low MOQ, custom EEPROM programming, private label OEM for global distributors and overseas network procurement.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QSFP-40G-ER4
2 Arista Networks  QSFP-40G-ER4
3 Brocade  QSFP-40G-ER4
4 H3C  QSFP-40G-ER4-WDM1300
5 HPE Aruba   Q9G82A
6 HPE H3C  JL306A
7 Huawei  QSFP-40G-ER4 
8 Juniper  JNP-QSFP-40GE-ER4
9 Intel  E40GQSFPER 
10 Palo Alto Networks  PAN-QSFP-40GBASE-ER4 






Description

H3C QSFP-40G-ER4-WDM1300 Compatible QSFP+ 40G ER4 Transceiver | 40GBASE-ER4 1310nm(CWDM4)40km Duplex LC SMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE is a trusted optical transceiver manufacturer and supplier delivering compatible optical networking solutions for global distributors, system integrators and international buyers. Our Brocade QSFP-40G-ER4 compatible 40G QSFP+ ER4 transceiver follows IEEE 802.3ba 40GBASE-ER4 and MSA SFF-8636 standards. Adopting 1310nm CWDM4 four-wavelength multiplexing, this optic delivers stable 40Gbps transmission up to 40km over OS2 single-mode fiber, well suited for metro fiber links and cross-site data center interconnection. Preloaded with Brocade tailored EEPROM firmware, this duplex LC hot-pluggable module supports plug-and-play deployment on Brocade network hardware without default transceiver alarms. We provide bulk wholesale, low MOQ trial orders, private label OEM and custom EEPROM programming to satisfy overseas procurement and branded resale demands. Built-in DDM diagnostic monitoring and hot-swap capability simplify field installation and maintain steady long-term link performance for enterprise and carrier-grade network projects.

Key Technical Specifications 

 H3C Compatible QSFP-40G-ER4-WDM1300  Vendor Name HYTOPTODEVICE
Form Factor QSFP+ Max Data Rate 44.6Gbps (4x 11.2Gbps)
Wavelength 1310nm Max Distance 40km
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type APD
TX Power -2.7~4.5dBm Receiver Sensitivity < -21.2dBm
Power Consumption ≤3.5W Receiver Overload -4.5dBm
Protocols OTN OTU3, 40G Ethernet, SATA/SAS3, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)


For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm CWDM4 module.

  • Optical Attenuator Required for Short Links: For testing or short-distance connections (<15km), connect a 10dB–15dB optical attenuator to the RX port to prevent damaging the receiver.

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.

  • Mode Setting: Configure 40G port speed via switch CLI. This LR4 module does not support breakout to 4×10G.
  • Operating Environment: 0°C–70°C commercial temperature range. Ensure cabinet ventilation to avoid optical power attenuation from overheating.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices 

1. Supported Hardware & Firmware

As a professional manufacturer and supplier, all HYTOPTODEVICE 40G ER4 modules are preloaded with Brocade exclusive EEPROM data for zero-alarm plug-and-play compatibility with supported firmware releases. Every module undergoes real-machine testing, temperature cycling and 72-hour burn-in to guarantee reliable recognition and error-free 40km transmission. We offer custom EEPROM programming and private label OEM services for bulk wholesale distributors and enterprise integrator procurement.
Validated Brocade Platforms:
  • Brocade VDX 6740/6940/6940-36Q series leaf-spine data center switches
  • Brocade ICX 7750 series high-density enterprise chassis switches
  • Brocade NetIron MLX series metro routing chassis platforms
  • All Brocade hardware equipped with standard 40GBASE-ER4 QSFP+ interfaces

2. Multi-Brand Cross Compatibility

Built on universal MSA open standards, this 40G ER4 transceiver offers wide cross-brand interoperability with Arista, Juniper, H3C, Huawei, Dell and other mainstream network hardware, ideal for mixed-vendor metro network and DCI upgrade projects. We support low MOQ bulk wholesale, custom EEPROM tuning and private label OEM to satisfy multi-brand deployment demands for global integrators and overseas buyers.

3. Free Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility
  • Sample testing available before bulk orders for project validation
  • Private label customization and professional deployment guides
  • Rigorous batch quality consistency control
  • Custom EEPROM configuration for special and legacy network setups
  • Free EEPROM recoding with 24/7 technical support


Primary Application Scenarios

  • Data Center Interconnect (DCI): 40km long-distance interconnection between geographically separated Brocade data center facilities
  • Metro Core Backbone Network: Cross-city enterprise 40G fiber transmission for carrier and campus network infrastructure
  • Multi-site Campus Networking: Stable long-range fiber links for multi-branch large enterprise cross-site network deployment
  • Cost-Effective Network Refresh: Direct drop-in replacement for original Brocade QSFP-40G-ER4 optics to cut hardware procurement expenses
  • Private Label OEM Resale Projects: Optical module bulk supply for global optical transceiver distributors and network equipment vendors

Connectivity Solutions(Applications) 


1.40GbE Switch-to-Switch Connectivity
HYTOPTODEVICE QSFP-40G-ER4 replacement module for 40GbE switch to switch

2.40GbE Switch-to-NIC Interconnection

40GBASE-ER4 40km duplex LC SMF optic from CHINA OPTICAL TRANSCEIVER MANUFACTURER hytoptodevice

3.40GbE Structured Cabling Interconnect
hytoptodevice 40g qsfp+ er4 transceiver module 1310nm 40km smf  for structured cabling interconnectivity


The Core Feature

1. 40G QSFP+ Connectivity for Low-Power Data Centers

Combining low power consumption, high port density, and high-speed performance, the QSFP+ transceiver gives you a fast, cost-effective route to 40G transmission — no big footprint required.

hytoptodevice compatible 40gbase-er4 optical transceiver 1310nm 40km smf


2.
No Guesswork. No Downtime. Pre-Tested for Your Switch.

A mismatched module doesn't just slow you down — it kills your link and burns your deployment hours. That's why every 40G QSFP+ ER4 module is compatibility-tested in the target switch environment before it ships. What arrives at your rack is a module already proven to work: clean link-up on the first plug-in, zero surprises, zero downtime. See the verification for yourself: Compatibility Video.

hytoptodevice compatible 40g qsfp+ er4 module

3.Every Unit Passes Before It Ships. Not Just a Sample.

A sample is a guess about the batch. An individual test is proof about the unit. Each QSFP+ ER4 transceiver is individually verified for optical compliance and continuous operational stability before shipping — zero reliance on sampling, zero shortcuts. What you install is what we proved. Performance: guaranteed, not gambled. Curious how? Tour the Test Center.

HYTOPTODEVICE 40G ER4 QSFP+ module comprehensive factory testing stable performance for various platforms bulk wholesale orders


FAQ 

Q1: Can I confirm module compatibility with my H3C hardware prior to purchase?
A: Yes, we can complete pre-check compatibility validation for your hardware before you place an order. HYTOPTODEVICE runs testing for this QSFP-40G-ER4-WDM1300 against matching H3C firmware; send over your exact switch model and firmware release, and our team validates compatibility before shipment to avoid procurement losses.
Q2: What should I do if my H3C switch alerts unsupported transceiver after installation?
A: The unsupported transceiver warning can be eliminated by our EEPROM reprogramming service. This error comes from mismatched EEPROM identification codes; HYTOPTODEVICE can reflash the module’s EEPROM profile to match your H3C device, clearing the alert without replacing the optical transceiver.
Q3: Can this ER4 transceiver communicate with existing LR4 or IR4 modules deployed on my fiber network?
A: No, ER4 cannot establish stable links with LR4 or IR4 transceivers on the same fiber pair. ER4 features higher optical power budget supporting 40km transmission, while LR4 reaches max 10km and IR4 only 2km; mismatched types create power imbalance and intermittent link drops, so use matching HYTOPTODEVICE transceivers on both ends.
Q4: Is interoperability guaranteed if I fit a HYTOPTODEVICE compatible ER4 on one side and brand OEM ER4 on the opposite end?
A: Yes, third-party compatible ER4 and OEM ER4 optics can interoperate smoothly over single-mode fiber. All 40GBASE-ER4 modules follow IEEE and MSA industry standards; HYTOPTODEVICE QSFP+ 40G ER4 maintains standard wavelength and power specs to ensure steady connection with OEM ER4 on OS2 SMF.
Q5: Is 40GBASE-ER4 the correct transceiver choice for my 40km single-mode fiber link project?
A: Yes, 40GBASE-ER4 is the ideal optical module for 40km single-mode fiber connections. This HYTOPTODEVICE QSFP+ 40G ER4 delivers up to 40km transmission distance on OS2 SMF with sufficient optical margin, unlike LR4 limited to 10km, making it perfect for metro backbone and DCI interconnection.
Q6: What is the power draw of this 40G ER4 module and will my H3C line card handle thermal load?
A: This QSFP+ 40G ER4 consumes a maximum of 3.5W power. This rating complies with QSFP+ MSA specifications; HYTOPTODEVICE commercial grade ER4 modules pass thermal cycle testing, and most modern H3C line cards can support this power draw with proper cabinet airflow.
Q7: Will investing in 40G ER4 hardware lock my network infrastructure to legacy technology?
A: No, deploying 40G ER4 will not trap your network within outdated infrastructure. The CWDM4 fiber cabling deployed for 40G ER4 can be reused for future 100G CWDM4 upgrades, and HYTOPTODEVICE compatible ER4 provides a budget-friendly intermediate upgrade solution for data center interconnection.
Q8: What operational lifespan can I expect from these 40G ER4 transceivers inside my production network?
A: Our 40G ER4 optical transceivers have a minimum rated service life of 5 years. HYTOPTODEVICE carries out 72-hour continuous burn-in and aging tests before shipment, supporting stable continuous operation within 0~70℃ commercial temperature range for long-term network deployment.
Q9: What are the risks of early module failure, and what warranty protections are available?
A: The probability of premature failure remains low for properly installed HYTOPTODEVICE ER4 transceivers. We implement strict batch quality inspection for every production lot; our warranty covers DOA and early-stage failures within the warranty period, lowering project risks for integrators and bulk buyers.
Q10: Are there extra charges such as import duties, shipping or customs fees I need to plan for in my budget?
A: The quoted product price excludes import duty, customs clearance fees and international freight. HYTOPTODEVICE can provide commercial invoices and test certificates to support customs filing; buyers need to verify local import tax regulations in advance to calculate full procurement budget.
Q11: Am I eligible for discounted unit pricing when ordering large bulk quantities?
A: Yes, tiered volume discounts apply for bulk & wholesale orders. HYTOPTODEVICE operates directly as the optical transceiver factory; larger order volumes unlock better unit pricing, and we create custom quotations for distributors and system integrators with large procurement plans.
Q12: What is your minimum order quantity, and can I place small trial orders to test performance?
A: We offer flexible low MOQ and small trial batches for this H3C compatible QSFP+ 40G ER4 module. HYTOPTODEVICE accepts sample orders starting from 1 unit, allowing buyers to test and validate performance before committing to large-scale bulk procurement.
Q13: What is your ordering workflow, and do you provide formal contract paperwork for procurement?
A: Yes, we adopt a standardized quotation and formal contract order process. Reach out to HYTOPTODEVICE sales team with quantity, EEPROM requirements and shipping terms; we issue proforma invoices and formal documents to streamline your procurement workflow.
Q14: How long is the lead time for custom laser marking, private label and OEM branding services?
A: The standard lead time for private label and OEM branding customization is 5–8 working days once the order is confirmed. HYTOPTODEVICE supplies custom laser marking, customized packaging and EEPROM programming for OEM customers, while standard stock items ship quickly.
Q15: Can your engineering team help evaluate my optical link feasibility before I finalize purchase?
A: Yes, our pre-sales engineering team offers professional link validation support. Share your fiber length, fiber type and H3C switch hardware details with HYTOPTODEVICE engineers, we can calculate optical power budget and assess the feasibility of your 40km 40G link before purchase.


Packaging & Custom OEM Solutions

Every 40G QSFP+ ER4 transceiver leaves our warehouse in sealed ESD-safe packaging, dispatched the same day your order is confirmed. For bulk orders, we tailor the full OEM package — logo printing and private labeling — built for network wholesaler,distributors, integrators, and enterprise deployments.
hytoptodevice cost‑effective 40G QSFP+ LR4 optical module with custom package


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • HYTOPTODEVICE manufacturer supply  QSFP-40G-ER4 compatible 40G QSFP+ ER4 transceiver, bulk wholesale custom EEPROM programming private label for global distributor and network integrator
  • HYTOPTODEVICE manufacturer supply QSFP-40G-ER4 compatible 40G QSFP+ ER4 transceiver, bulk wholesale custom EEPROM programming private label for global distributor and network integrator
  • Bulk wholesale low MOQ hytoptodevice compatible 40G ER4 QSFP+ transceiver, factory direct supply for global distributor, system integrator and network buyer
  • HYTOPTODEVICE factory 40km 40G QSFP+ ER4 optical module with custom EEPROM programming, OEM service for overseas bulk network project procurement

Download