H3C QSFP-100G-ZR4-WDM1300 Compatible QSFP28 100G ZR4 Transceiver | 100GBASE-ZR4 1310nm LAN WDM 80km Duplex LC/UPC Module HYTOPTODEVICE
Product Overview
HYTOPTODEVICE QSFP28 100G ZR4 transceiver acts as drop‑in replacement for H3C QSFP-100G-ZR4-WDM1300. Built to 100GBASE-ZR4 and QSFP28 MSA standards, this high-performance optic delivers stable 100Gbps transmission up to 80km over OS2 single‑mode fiber, with 1310nm LAN WDM wavelength via duplex LC/UPC connector; host RS‑FEC must be enabled for reliable operation.
Pre‑programmed with H3C-specific EEPROM data, it supports plug‑and-play deployment and reduces unsupported transceiver alarms on H3C Comware OS platforms. As a professional optical module manufacturer and supplier, HYTOPTODEVICE provides factory bulk stock, sample trial orders and OEM customization for wholesalers, distributors and system integrators building long‑distance metro and DCI fiber links.
Key Technical Specifications
| H3C Compatible |
QSFP-100G-ZR4-WDM1300 |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
QSFP28 |
Max Data Rate |
103.125Gbps (4x 25.78Gbps) |
| Wavelength |
1295.56nm, 1300.05nm 1304.58nm, 1309.14nm
|
Max Distance |
80km |
| Connector |
Duplex LC/UPC |
Transmitter Type |
EML LWDM |
| Cable Type |
SMF |
Receiver Type |
SOA + PIN |
| Modulation (Electrical) |
4x 25G-NRZ |
TX Power |
1~6.5dBm |
| Power Consumption |
< 4.5W |
Receiver Sensitivity |
< -28dBm |
| Protocols |
QSFP28 MSA, SFF-8636, IEEE 802.3bm, CAUI-4 |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the
Datasheet
Usage Guidelines & Best Practices
-
Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm LAN WDM module.
-
Optical Attenuator Required for Short Links: For testing or short‑distance connections (<15km), connect a 15dB–20dB optical attenuator to the RX port to prevent damaging the receiver.(15KM<Distance<35km,connect 10‑15dB optical attenuator),ensuring the received power between -28~-7dBm.
-
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
-
Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.
- Mode Setting: Configure 100G port speed via switch CLI. This ZR4 module does not support breakout to 4×25G.
For detailed operation instructions, please refer to the
User Guide.
Full Compatibility List & Supported Network Hardware
1. Supported Hardware & Firmware
This module features H3C-tailored EEPROM programming, minimizing transceiver warnings for H3C network platforms. All products undergo full temperature burn‑in testing before shipment, compatible with the below H3C hardware:
• H3C S9820 Series
• H3C S6880 Series
• H3C S6812 Series
• H3C SecPath M9000 Series
• Universal Compatibility: All network devices with standard QSFP28 ports supporting 100GBASE-ZR4 protocol
2. Multi-Brand Cross Compatibility
Built on universal MSA open standards, this QSFP28 transceiver works seamlessly with mainstream brands including Cisco, HPE, Juniper, Huawei, and Fortinet. It supports mixed‑vendor network upgrades for indoor data center environments.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• Indoor long-distance campus & branch 80km point-to-point fiber links
• Carrier metro aggregation and long-haul backbone transmission
• Remote data center interconnection (DCI)
• 100G to 100G link for Switch‑Adapter Card inter‑connections
• 100G structured cabling deployment for data‑center and enterprise backbone infrastructure
• Network hardware upgrade for H3C data center infrastructure
• Inventory supply for global distributors and system integrators working on metro network tender projects
Connectivity Solutions(Applications)
1.Leaf-Spine Architecture

2. 100G to 100G for Switch-Switch Interconnection

3.100G to 100G for Switch-NIC Connection

4.100G Structured Cabling

The Core Feature
1.Low Power Consumption for High-Density Deployment for Data Center
Low power draw supports high-density port layout in data center racks, saving system power budget for leaf-spine and metro switch deployments.

2.Verified Host Interoperability
All modules pass real target device interoperability tests. Matched EEPROM ensures zero-alarm hot-swap and stable long-term operation on mainstream platforms.

3.Strict Full-Round Quality Testing
Every module undergoes comprehensive test. Strict quality control (IQC/PQC/OQC/FQC) guarantees stable 24/7 commercial operation.

FAQ
Q1: Can HYTOPTODEVICE H3C compatible QSFP28 100G ZR4 transceivers run on different brands of network switches and routers?
A: Yes, provided the module's EEPROM is coded with the correct vendor signature. Buyers must specify their hardware brand during purchase when ordering this H3C compatible QSFP28 100G transceiver.
Q2: Can direct-detect 100G ZR4 QSFP28 modules interoperate with coherent DWDM 100G optical transceivers?
A: No. ZR4 uses direct-detect technology with an internal Semiconductor Optical Amplifier (SOA) and cannot interoperate natively with coherent transceivers. HYTOPTODEVICE QSFP28 100G ZR4 modules adopt direct detection design optimized for metro aggregation links.
Q3: Is it possible to split this 100GBASE-ZR4 QSFP28 port into multiple separate 25G connections?
A: No. ZR4 modules are engineered exclusively for long-range point-to-point aggregation links, not for breaking out into multiple lower-speed connections. This QSFP28 100G module is built for single 100G point-to-point transmission.
Q4: What FEC setting is mandatory on the connected network ports to maintain error-free 100G ZR4 fiber links?
A: Yes. Platform-based RS-FEC (Reed-Solomon FEC) must typically be enabled on both switch ports to ensure an error-free link over long distances. All HYTOPTODEVICE compatible QSFP28 100G ZR4 optics require matched RS-FEC settings on both ends.
Q5: What options are available for bulk purchasers to reflash EEPROM profiles when changing network equipment vendors?
A: You will need an optical transceiver programming coding box and matching software to rewrite the module's compatibility profile. HYTOPTODEVICE supplies both coding box and software for bulk buyers to re-program modules on-site, paired with lifetime free technical support for this QSFP28 100G ZR4 transceiver.
Q6: Do short fiber spans need optical attenuators to avoid receiver damage on 100G ZR4 QSFP28 optics?
A: Yes. Short links (under 20 km) often require optical attenuators because excessive input power can saturate or damage the internal receiver photodiode. Our QSFP28 100G ZR4 supplier team will advise proper attenuation values for your site deployment.
Q7: What optical path loss budget can network planners expect from our H3C compatible QSFP28 100G ZR4 transceiver?
A: They are typically rated for an optical path loss budget of around 29 dB, depending on fiber attenuation and connector quality. HYTOPTODEVICE factory performs full link budget testing for every batch of 100GBASE-ZR4 modules.
Q8: What operating case temperature range do these HYTOPTODEVICE QSFP28 100G ZR4 optical transceivers support?
A: Typically 0°C to 70°C. Exceeding the maximum case temperature will trigger thermal alarms or port shutdowns. Our QSFP28 100G transceivers pass full temperature cycling test before delivery.
Q9: Are there built-in thermal protection mechanisms on network switches for third-party 100G ZR4 QSFP28 modules?
A: Yes, network operating systems will log critical warnings and can automatically disable ports if internal transceiver temperature sensors exceed safety thresholds. This safety feature works seamlessly with HYTOPTODEVICE compatible QSFP28 100G optics.
Q10: Do distributors qualify for discounted tier pricing when ordering large quantities of QSFP28 100G ZR4 compatible optical modules?
A: Yes, most reputable third-party optics vendors and distributors offer tiered scaling discounts for bulk purchases. HYTOPTODEVICE, as a QSFP28 100G manufacturer, provides competitive volume pricing for service provider rollouts.
Q11: Are evaluation PoC sample units available for lab testing of HYTOPTODEVICE QSFP28 100G ZR4 transceivers before mass order?
A: Many specialized third-party optic suppliers offer evaluation samples (PoC units) for qualification testing in lab environments. HYTOPTODEVICE supports low MOQ sample orders for system integrators validating QSFP28 100G ZR4 modules.
Q12: What anti-static handling requirements must technicians follow during installation of QSFP28 100G ZR4 transceivers?
A: Technicians must use ESD wrist straps, keep dust caps on optical bores when unpatched, and avoid touching exposed glass ferrule tips. Our factory packing instructions include handling guidelines for QSFP28 100G transceiver storage and installation.
Q13: What kind of engineering support should system integrators look for from their QSFP28 100G transceiver vendor?
A: Access to optical network engineers capable of troubleshooting complex layer-1 link degradation, FEC mismatches, and DOM telemetry logs. HYTOPTODEVICE provides professional technical support for all bulk QSFP28 100G ZR4 deployments.
Q14: How will fiber microbends and physical cable stress impact 100G ZR4 QSFP28 metro data links?
A: Signal loss escalates, causing FEC correction rates to surge, which can ultimately degrade throughput or drop the link entirely. Our technical team can help audit fiber routes when deploying HYTOPTODEVICE QSFP28 100G ZR4 transceivers.
Q15: Can high moisture levels inside data center racks lead to permanent failure of QSFP28 100G ZR4 optical transceivers?
A: Standard enterprise modules expect non-condensing indoor data center environments; deploying them in wet or unsealed outdoor boxes will cause rapid corrosion. HYTOPTODEVICE QSFP28 100G ZR4 transceivers are designed for standard dry data center operation.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

