H3C LSWM1STK Compatible SFP+ to SFP+ DAC Cable 50cm | 10GBASE-CU Passive Copper Twinax Cable HYTOPTODEVICE
Product Overview
HYTOPTODEVICE LSWM1STK compatible SFP+ passive twinax DAC cable is a direct replacement for original H3C 0.5m 10G stacking copper cable. It meets SFF-8431 and 10GBASE-CU MSA standards. This SFP+ passive DAC delivers stable, low-latency 10Gbps transmission for short intra-rack H3C switch stacking and server uplink.
It is preloaded with H3C EEPROM signature for plug-and-play and avoids Comware OS transceiver alerts. HYTOPTODEVICE supplies bulk stock, sample testing and OEM private label for H3C data center stacking projects.
Key Technical Specifications
| H3C Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
0.5m (1.6ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
20mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target Cisco hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated HPE Hardware & Firmware
This SFP+ passive dac cable is preloaded with H3C EEPROM data, supports alarm-free plug-and-play under Comware OS. Every cable passes target switch testing before shipment:
• H3C S5560 / S5590, S6520 / S6800 switch platforms
• H3C S10500, S12500 core switch series
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this SFP+ DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• H3C switch stacking via short twinax DAC links
• ToR switch to server low-latency 10G uplink
• Virtualization cluster and storage fabric interconnection
• Cost-effective short 10G links replacing fiber patch cords
• Bulk inventory sourcing for data center contractors and distributors
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the SFP+ 10G DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive SFP+ 10G DAC draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Will this H3C stacking DAC run normally on other mainstream vendor network switches?
A: Yes, it supports cross-vendor 10GBASE-CU SFP+ ports. HYTOPTODEVICE pre-codes EEPROM and validates on target hardware. Test samples first for locked switch firmware.
Q2: Can I rewrite the EEPROM signature when I upgrade or replace my H3C switch fleet later?
A: Yes, EEPROM reprogramming is available. HYTOPTODEVICE supplies optional coding tools and free lifetime technical support for signature modification.
Q3: How does copper AWG rating affect signal performance for short 10G stacking DAC?
A: AWG determines copper conductor thickness. This 50cm H3C DAC uses 30AWG. Thin gauge brings high flexibility for tight rack routing, thicker 24AWG reduces attenuation for longer DAC runs.
Q4: What bending limit should I follow for this 10G twinax stacking cable?
A: Follow the 20mm minimum bend radius. The standard minimum bend radius is typically 5 times the outer cable diameter. Bending lower than this can deform the internal twinax structure and cause bit errors.
Q5: Is there a clear power gap between passive twinax DAC and active amplified DAC?
A: Yes, active DAC consumes extra power for signal boosting. Our passive 10G DAC draws under 0.1W. It helps cut total power budget for high-density H3C switch stacks.
Q6: Why choose copper stacking DAC instead of AOC for local rack stacking links?
A: Passive DAC delivers better cost and latency for links under 7 meters. HYTOPTODEVICE twinax DAC has no optical chips, ideal for fixed short-distance switch stacking.
Q7: Between copper DAC and Cat6a 10GBASE-T, which option produces less thermal load?
A: Passive DAC generates far less heat. 10GBASE-T PHY chips continuously dissipate heat. This DAC has no powered components to reduce rack thermal pressure.
Q8: Could unshielded twinax DAC bring EMI interference issues inside packed server racks?
A: Our fully shielded twinax design keeps EMI low. HYTOPTODEVICE DAC meets industry EMC standards. Shielding blocks crosstalk in dense mixed-equipment racks.
Q9: What are common root causes for unstable DAC links, packet drops and CRC counters climbing?
A: Damaged conductors or poor contact are the top triggers. Our factory 100% test filters defective units. Sharp bends and mismatched port speed also create link flapping.
Q10: Is FEC configuration required to keep passive 10G copper DAC links stable?
A: FEC is not required for 10GBASE-CU passive DAC. FEC is designed for optical long-reach links. Disable FEC to avoid unnecessary processing overhead on H3C stacking ports.
Q11: Can repeated high-temperature operation gradually shorten the service life of twinax DAC?
A: Yes, sustained high temperature accelerates material aging. HYTOPTODEVICE DACs pass thermal cycling testing. It supports reliable 24/7 running inside warm data center cabinets.
Q12: What practical differences separate PVC and LSZH cable jackets for data center deployments?
A: PVC suits regular indoor racks at lower cost. LSZH releases minimal smoke and zero halogens during fire. HYTOPTODEVICE provides both jacket options for bulk stacking orders.
Q13: Will frequent plug and unplug wear the SFP+ connector or the port cage on H3C switches?
A: Repeated hot-plugging slowly wears gold contact plating. HYTOPTODEVICE DAC uses premium gold-plated contacts. It extends plug cycles for frequent reconfiguration of stacking fabrics.
Q14: Is it feasible to plug this 10G SFP+ DAC into a 25G SFP28 uplink port?
A: It may negotiate down to 10G speed. Final behavior depends on switch firmware. Run sample verification before deploying in 25G SFP28 uplink slots.
Q15: Can I run this 10G DAC cable through a breakout adapter on a 40G QSFP+ port?
A: Native 40G operation is not supported. The DAC only runs 10G signal. Confirm breakout adapter and switch compatibility with the HYTOPTODEVICE technical team ahead of deployment.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

