| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | Q56-200-CU50CM | |
| 2 | Arista Networks | CAB-Q56-Q56-0.5M | |
| 3 | Dell | DAC-Q56-200G-0.5M | |
| 4 | NVIDIA/Mellanox | MCP1650-V00AE30 | |
| 5 | Generic | QSFP56-200G-CUxM |
| Generic Compatible |
MCP1650-V00AE30
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP56 to QSFP56 | Max Data Rate | 200Gbps |
| Cable Length | 0.5m (1.67ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE802.3cd, SFF-8436 |
| Minimum Bend Radius | 35mm | Application | 200G Ethernet and InfiniBand HDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP56 port must enable 200GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard QSFP56 200G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 200G QSFP56 passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: Can I get this 200GBASE-CR4 generic DAC pre-coded for my target switch brand? A1: Yes, this generic twinax cable supports custom EEPROM programming. HYTOPTODEVICE can flash the required vendor signature to ensure smooth recognition on Cisco, Arista, NVIDIA and other MSA QSFP56 platforms.
Q2: Is this 200GBASE-CR4 PAM4 twinax backward compatible with older 100G QSFP28 ports? A2: It does not offer native backward compatibility. QSFP56 uses 50G PAM4 signaling while QSFP28 relies on NRZ, and electrical pin definitions differ. Port rate adaptation depends entirely on your switch hardware capability.
Q3: Will using a programmable generic 200GBASE-CR4 DAC affect my switch manufacturer warranty? A3: Qualified MSA-compliant generic DAC cables do not automatically void OEM hardware warranty. All HYTOPTODEVICE 200G twinax cables pass rigorous signal testing to reduce compatibility risks for your deployment.
Q4: Does this blank generic 200GBASE-CR4 QSFP56 DAC support DDM diagnostic monitoring? A4: Yes, DDM/DOM function is available after proper EEPROM configuration. Once coded, you can read link diagnostic data directly from your switch CLI.
Q5: Are these generic 200GBASE-CR4 copper twinax cables compliant with global cabling standards? A5: Yes, our generic 200G QSFP56 DAC follows MSA, IEEE 802.3cd, RoHS and REACH standards. HYTOPTODEVICE carries out batch testing to meet global data center cabling requirements.
Q6: What signaling method is used for transmission on this 200GBASE-CR4 passive DAC? A6: It uses PAM4 four-level pulse amplitude modulation. This HYTOPTODEVICE 200GBASE-CR4 cable aggregates four 50G PAM4 lanes to hit 200Gbps, delivering higher bandwidth density than NRZ links.
Q7: What is the maximum reliable reach for passive 200GBASE-CR4 twinax copper cables? A7: The reliable maximum length for passive 200GBASE-CR4 twinax is 3 meters. PAM4 has tighter signal margin; we supply standard lengths from 0.5m up to 3m for in-rack AI and HPC connections.
Q8: Why select 200GBASE-CR4 passive DAC instead of fiber for low-latency GPU rack links? A8: Passive 200GBASE-CR4 DAC delivers lower latency than fiber solutions. Copper twinax removes optical conversion delay, making this HYTOPTODEVICE generic cable suitable for latency-sensitive AI training and computing workloads.
Q9: What AWG conductor sizes are commonly implemented for 200GBASE-CR4 QSFP56 twinax cables? A9: 30AWG and 26AWG are widely adopted for 200G twinax. This 0.5m generic DAC uses 30AWG for better flexibility; 26AWG is deployed for longer passive runs up to 3m with less signal attenuation.
Q10: Can this 200GBASE-CR4 generic twinax cable sustain continuous full line-rate traffic without packet drops? A10: Yes, it supports stable full line-rate 200G transmission without packet dropping. Every HYTOPTODEVICE 200G QSFP56 DAC goes through eye diagram testing to guarantee signal integrity under full load.
Q11: How does the bending tolerance of 200GBASE-CR4 PAM4 twinax compare with legacy 100G NRZ DAC? A11: 200GBASE-CR4 PAM4 twinax is less tolerant of sharp bends than 100G NRZ DAC. Our 30AWG cable remains flexible for dense rack routing, but must follow the 35mm minimum bend radius rule.
Q12: What pull-tab latch design comes fitted on these generic 200GBASE-CR4 QSFP56 connectors? A12: These QSFP56 connectors use the standard pull-tab latching structure. The pull tab on this HYTOPTODEVICE generic DAC enables safe hot swap and avoids port damage during cabling maintenance.
Q13: Can this short 0.5m 200GBASE-CR4 DAC be deployed for inter-rack cabling? A13: No, this 0.5m short passive twinax is designed only for in-rack links. It cannot support inter-rack connections; select active optical cables (AOC) for longer cross-rack 200G links.
Q14: Can I customize jacket color and add private branding for bulk orders of this 200GBASE-CR4 DAC? A14: Black is our default jacket color. HYTOPTODEVICE offers custom jacket color and OEM private labeling service for bulk orders of this generic 200G QSFP56 twinax cable.
Q15: What warranty coverage applies to these generic 200GBASE-CR4 passive copper twinax cables? A15: This 200G QSFP56 passive copper twinax cable comes with our standard multi-year product warranty. HYTOPTODEVICE provides responsive RMA and technical support for wholesale integrators.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




