Generic Compatible 100G QSFP28 ZR4 Transceiver Module | 100GBASE-ZR4 1310nm(LAN WDM) 80KM Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE generic compatible 100G QSFP28 ZR4 transceiver is a universal drop-in 100GBASE-ZR4 optical module. Designed following QSFP28 MSA and 100GBASE-ZR4 standards, it delivers stable 100Gbps transmission up to 80km over OS2 single-mode fiber at 1310nm LAN WDM wavelength with duplex LC/UPC connector. RS-FEC must be enabled on host ports for reliable long-distance transmission.
This generic QSFP28 ZR4 transceiver supports custom EEPROM coding to match multiple mainstream brand switches and routers, eliminating unrecognized transceiver alarms. As a professional optical module manufacturer and supplier, HYTOPTODEVICE offers factory bulk stock, sample trial orders and OEM customization for wholesalers, distributors and system integrators building metro and DCI fiber networks.
Key Technical Specifications
| Generic Compatible |
QSFP-100G-ZR4 |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
QSFP28 |
Max Data Rate |
103.125Gbps (4x 25.78Gbps) |
| Wavelength |
1295.56nm, 1300.05nm 1304.58nm, 1309.14nm
|
Max Distance |
80km |
| Connector |
Duplex LC/UPC |
Transmitter Type |
EML LWDM |
| Cable Type |
SMF |
Receiver Type |
SOA + PIN |
| Modulation (Electrical) |
4x 25G-NRZ |
TX Power |
1~6.5dBm |
| Power Consumption |
< 4.5W |
Receiver Sensitivity |
< -28dBm |
| Protocols |
QSFP28 MSA, SFF-8636, IEEE 802.3bm, CAUI-4 |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the
Datasheet
Usage Guidelines & Best Practices
-
Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm LAN WDM module.
-
Optical Attenuator Required for Short Links: For testing or short‑distance connections (<15km), connect a 15dB–20dB optical attenuator to the RX port to prevent damaging the receiver.(15KM<Distance<35km,connect 10‑15dB optical attenuator),ensuring the received power between -28~-7dBm.
-
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
-
Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.
- Mode Setting: Configure 100G port speed via switch CLI. This ZR4 module does not support breakout to 4×25G.
For detailed operation instructions, please refer to the
User Guide.
Full Compatibility List & Supported Network Hardware
1. Supported Hardware & Firmware
This generic QSFP28 ZR4 module supports customized EEPROM profiles to work with many major network platforms. Every unit passes full temperature burn-in testing before shipment.
• H3C, Cisco, Juniper, Arista, Huawei, Brocade, Extreme, Dell, HPE Aruba and more QSFP28 equipped switches & routers
• Universal Compatibility: All network hardware with standard QSFP28 ports supporting 100GBASE-ZR4 protocol
2. Multi-Brand Cross Compatibility
Built on universal MSA open standards, this QSFP28 transceiver works seamlessly with mainstream brands including Cisco, HPE, Juniper, Huawei, and Fortinet. It supports mixed‑vendor network upgrades for indoor data center environments.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• Long-distance campus & branch 80km point-to-point fiber links
• Carrier metro aggregation and long-haul backbone transmission
• Remote data center interconnection (DCI)
• 100G to 100G link for Switch‑Adapter Card inter‑connections
• 100G structured cabling deployment for data‑center and enterprise backbone infrastructure
• Multi-vendor data center network hardware upgrade
• Inventory supply for global distributors and system integrators for metro network tender projects
Connectivity Solutions(Applications)
1.Leaf-Spine Architecture

2. 100G to 100G for Switch-Switch Interconnection

3.100G to 100G for Switch-NIC Connection

4.100G Structured Cabling

The Core Feature
1.Low Power Consumption for High-Density Deployment for Data Center
Low power draw supports high-density port layout in data center racks, saving system power budget for leaf-spine and metro switch deployments.

2.Verified Host Interoperability
All modules pass real target device interoperability tests. Matched EEPROM ensures zero-alarm hot-swap and stable long-term operation on mainstream platforms.

3.Strict Full-Round Quality Testing
Every module undergoes comprehensive test. Strict quality control (IQC/PQC/OQC/FQC) guarantees stable 24/7 commercial operation.

FAQ
Q1: Can this HYTOPTODEVICE generic QSFP28 100G ZR4 transceiver be coded to operate on different brands of network equipment?
A: Yes, we can custom program the EEPROM to match your target vendor signature. Buyers should specify their network hardware model when ordering this generic compatible 100G QSFP28 ZR4 module.
Q2: Can 100GBASE-ZR4 generic QSFP28 transceivers communicate with coherent 100G DWDM optical modules?
A: No. ZR4 uses direct-detect technology with an internal Semiconductor Optical Amplifier (SOA) and cannot interoperate natively with coherent transceivers. HYTOPTODEVICE generic QSFP28 ZR4 modules use direct detection design built for metro aggregation links.
Q3: Can a single generic 100G QSFP28 ZR4 port be split to run multiple independent 25G fiber connections?
A: No. ZR4 modules are engineered exclusively for long-range point-to-point aggregation links, not for breaking out into multiple lower-speed connections. This generic QSFP28 100G module supports only single 100G point-to-point transmission.
Q4: What mandatory FEC setting is required on host ports for error-free 100G ZR4 long-distance fiber links?
A: Yes. Platform-based RS-FEC (Reed-Solomon FEC) must typically be enabled on both ends of the fiber link to ensure an error-free connection over long distances. All HYTOPTODEVICE generic QSFP28 ZR4 optics need matched RS-FEC configuration on both connected ports.
Q5: What tools and support do bulk buyers get to reflash EEPROM profiles for different network hardware vendors?
A: You will need an optical transceiver programming coding box and matching software to rewrite the module's compatibility profile. HYTOPTODEVICE supplies both coding box and software for bulk buyers to re-program modules on-site, paired with lifetime free technical support for this generic QSFP28 100G ZR4 transceiver.
Q6: Is optical attenuation required on short fiber runs to protect the receiver diode inside generic 100G ZR4 QSFP28 transceivers?
A: Yes. Short links (under 20 km) often require optical attenuators because excessive input power can saturate or damage the internal receiver photodiode. Our 100G QSFP28 ZR4 wholesale team will recommend proper attenuation values for your site deployment.
Q7: What optical power budget can network designers expect from HYTOPTODEVICE generic compatible 100G QSFP28 ZR4 optical transceiver?
A: They are typically rated for an optical path loss budget of around 29 dB, depending on fiber attenuation and connector quality. HYTOPTODEVICE factory completes full link budget testing for every batch of generic 100GBASE-ZR4 modules.
Q8: What case temperature range can these generic QSFP28 100G ZR4 optical transceivers sustain during continuous operation?
A: Typically 0°C to 70°C. Exceeding the maximum case temperature will trigger thermal alarms or port shutdowns. Our generic QSFP28 100G transceivers go through full temperature cycling testing before delivery.
Q9: Do host network switches provide thermal protection for third-party generic QSFP28 100G ZR4 optical transceivers?
A: Yes, network operating systems will log critical warnings and can automatically disable ports if internal transceiver temperature sensors exceed safety thresholds. This protection feature works smoothly with HYTOPTODEVICE generic QSFP28 100G optics.
Q10: Are tiered volume discounts available for distributors placing large bulk orders of generic 100G QSFP28 ZR4 modules?
A: Yes, most reputable optical transceiver vendors and distributors offer tiered scaling discounts for bulk purchases. HYTOPTODEVICE, as a 100G QSFP28 manufacturer, provides competitive bulk pricing for metro network and service provider rollouts.
Q11: Can system integrators order pre-sales PoC samples to test generic QSFP28 100G ZR4 transceivers inside their lab environment?
A: Many specialized optical transceiver suppliers offer evaluation samples (PoC units) for qualification testing in lab environments. HYTOPTODEVICE accepts low MOQ sample orders for integrators validating generic 100G QSFP28 ZR4 modules.
Q12: What anti-static handling rules are required for technicians installing generic 100G QSFP28 ZR4 optical transceivers?
A: Technicians must use ESD wrist straps, keep dust caps on optical bores when unpatched, and avoid touching exposed glass ferrule tips. Our factory packing guide includes storage and installation handling tips for generic QSFP28 100G transceivers.
Q13: What types of engineering support should buyers seek from their generic QSFP28 100G optical transceiver vendor?
A: Access to optical network engineers capable of troubleshooting complex layer-1 link degradation, FEC mismatches, and DOM telemetry logs. HYTOPTODEVICE provides professional technical support for all bulk generic QSFP28 ZR4 deployments.
Q14: What impact will fiber microbending and cable physical strain bring to generic 100G ZR4 QSFP28 metro fiber links?
A: Signal loss escalates, causing FEC correction rates to surge, which can ultimately degrade throughput or drop the link entirely. Our technical team can help audit fiber routes during HYTOPTODEVICE generic QSFP28 ZR4 transceiver deployment.
Q15: Will high humidity inside data center racks lead to permanent failure of generic 100G QSFP28 ZR4 optical transceivers?
A: Standard enterprise modules expect non-condensing indoor data center environments; deploying them in wet or unsealed outdoor boxes will cause rapid corrosion. HYTOPTODEVICE generic QSFP28 ZR4 transceivers are designed for standard dry data center operation.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

