• EdgeCore ET7402-ER4 Compatible 100G QSFP28 ER4 Lite Module | 100GBASE-ER4L 1310nm(LAN WDM) 40KM Transceiver Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE
  • Side profile MSA-certified 100G QSFP28 ER4 Optical Transceiver for Cisco data center bulk upgrade projects
  • EdgeCore ET7402-ER4 Compatible 100G QSFP28 ER4 Lite Module | 100GBASE-ER4L 1310nm(LAN WDM) 40KM Transceiver Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE
  • EdgeCore ET7402-ER4 Compatible 100G QSFP28 ER4 Lite Module | 100GBASE-ER4L 1310nm(LAN WDM) 40KM Transceiver Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE
  • EdgeCore ET7402-ER4 Compatible 100G QSFP28 ER4 Lite Module | 100GBASE-ER4L 1310nm(LAN WDM) 40KM Transceiver Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE
  • Side profile MSA-certified 100G QSFP28 ER4 Optical Transceiver for Cisco data center bulk upgrade projects
  • EdgeCore ET7402-ER4 Compatible 100G QSFP28 ER4 Lite Module | 100GBASE-ER4L 1310nm(LAN WDM) 40KM Transceiver Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE
  • EdgeCore ET7402-ER4 Compatible 100G QSFP28 ER4 Lite Module | 100GBASE-ER4L 1310nm(LAN WDM) 40KM Transceiver Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE

EdgeCore ET7402-ER4 Compatible 100G QSFP28 ER4 Lite Module | 100GBASE-ER4L 1310nm(LAN WDM) 40KM Transceiver Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE

Buy HYTOPTODEVICE EdgeCore ET7402‑ER4 compatible 100G QSFP28 ER4 Lite transceiver. 100GBASE‑ER4L 1310nm LAN WDM, 40km OS2 single‑mode duplex LC/UPC. Bulk factory wholesale, custom EEPROM, OEM available for EdgeCore open switches, distributors & integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco QSFP-100G-ER4L-S
2 Arista Networks QSFP-100G-ERL4
3 Dell  Q28-100G-ER4-lite
4 Huawei  QSFP-100G-ER4-Lite
5 Juniper Networks  QSFP-100G-ER4L
6 Ruijie Networks  100G-QSFP-ER4-SM1310
7 HPE Aruba  JL743A 
8 Brocade  100G-QSFP28-ER4-40KM
9 Ciena  XCVR-Q30V31 
10 EdgeCore  ET7402-ER4
Description

EdgeCore ET7402-ER4 Compatible 100G QSFP28 ER4 Lite Module | 100GBASE-ER4L 1310nm(LAN WDM) 40KM Transceiver Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE


Product Overview

HYTOPTODEVICE 100G QSFP28 ER4 Lite transceiver serves as a drop‑in replacement for EdgeCore ET7402‑ER4. Built to 100GBASE‑ER4L and QSFP28 MSA standards, this optic delivers stable 100Gbps transmission up to 40km over OS2 single‑mode fiber, with 1310nm LAN WDM wavelength via duplex LC/UPC connector.

Pre‑programmed with EdgeCore‑specific EEPROM data, it supports plug‑and‑play deployment without unsupported transceiver alarms on EdgeCore open‑network switches. HYTOPTODEVICE provides factory bulk stock, sample trial orders and OEM customization for wholesalers, distributors and system integrators deploying EdgeCore data‑center and metro fiber links.

Key Technical Specifications

  EdgeCore  Compatible ET7402-ER4 Vendor Name HYTOPTODEVICE
Form Factor QSFP28 Max Data Rate 103.125Gbps
Wavelength 4 x LAN WDM (1295、1300、1305、1310nm) Max Distance 30km without FEC
40km with FEC
Connector Duplex LC Transmitter Type 4 x LAN WDM EML
Cable Type SMF Receiver Type APD
TX Power -2.5~+4.5dBm Receiver Sensitivity <-16.9dBm without FEC
<-20.9dBm with FEC
Protocols 100G Ethernet, MSA Compliant Power Consumption < 4.0W

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm CWDM4 module.

  • Optical Attenuator Required for Short Links: For testing or short-distance connections (<15km), connect a 10dB–15dB optical attenuator to the RX port to prevent damaging the receiver.(15KM

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.

  • Mode Setting: Configure 100G port speed via switch CLI. This ER4 module does not support breakout to 4×25G.
  • Operating Environment: 0°C–70°C commercial temperature range. Ensure cabinet ventilation to avoid optical power attenuation from overheating.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Supported Network Hardware

1.Native EdgeCore Compatibility

This module adopts EdgeCore‑specific EEPROM, supporting zero‑alarm plug‑and‑play with official firmware. All products are strictly tested, fully compatible with the below EdgeCore hardware models:
• EdgeCore DCS200 Series: DCS204 (AS7726‑32X) leaf‑spine switches
• EdgeCore DCS500 Series: DCS500 (AS7816‑64X) high‑density 100G switches
• EdgeCore DCS800 Series: DCS801 / Wedge100BF‑32QS TOR switches
• Universal Compatibility: All EdgeCore devices with standard QSFP28 ports supporting 100GBASE‑ER4L protocol

2.Multi-Brand Cross Compatibility

uilt on universal MSA open standards, this QSFP28 transceiver is interoperable with mainstream network brands including Cisco, Juniper, D‑Link, H3C, Huawei and Fortinet, adapting to mixed‑vendor network upgrade and expansion scenarios.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios

• Enterprise long‑distance branch & campus point‑to‑point 40km links
• Operator metro aggregation and backbone transmission
• Geographically separated data center remote interconnection
• Cost‑effective hardware upgrade for EdgeCore network infrastructure
• Inventory sourcing for global distributors and system integrators

Connectivity Solutions(Applications)

1. 100G Switch-to-Switch Interconnection

40km router-to-switch long-haul interconnection topology using commercial temperature 100G ER4 QSFP28 Transceiver for Ruijie CloudFabric DCI networking

2.100G Long-haul Switch Link with
Structured Cabling

Enterprise indoor structured cabling long-distance transmission solution with 100G ER4 QSFP28 Transceiver for Ruijie cross-building 100G trunk links

The Core Features

1.Broad 100G Data Center Applicationg
Supports reliable, high-efficiency long-haul data transmission between core and spine network layers, fully satisfying deployment requirements for large-scale data centers.



2. 
100G High-Speed Data Center Connectivity

Featuring 4.0W low power draw, high port density and exceptional speed, this QSFP28 ER4L transceiver unlocks fast, seamless upgrades to 100G transmission for your data center infrastructure.

hytoptodevice compatible 100g qsfp28 er4l transceiver for data center with low power consumption and high-speed

3. Host-Tested for Proven Interoperability

Every module undergoes rigorous compatibility validation on target host switches, ensuring stable, error-free operation in your live network environment.Specific Compatibility Video available upon request.

HYTOPTODEVICE 100GBASE-ER4L Optical transceiver module with seamless and reliable operation.

4.Comprehensive Reliability Testing

Validated via stringent procedures using advanced test equipment, guaranteeing premium-grade, dependable optical performance for your network deployments. Curious how? Tour the Test Center.

100G QSFP28 ERL Transceiver 40KM FOR factory standardized production and testing process


FAQ 


Q1: Will EdgeCore ET7402‑ER4 drop‑in replacement QSFP28 ER4 Lite run on legacy 40G‑only QSFP+ ports of open‑compute switches?
A: It cannot establish valid links in QSFP+ 40G slots. This HYTOPTODEVICE EdgeCore‑compatible ER4 Lite locks at fixed 100G line‑rate without rate‑downshift capability. Open‑source NOS integrators have to leverage native QSFP28 100G ports on DCS‑series hardware to achieve full 100GBASE‑ER4L performance.

Q2: What real‑world performance gaps exist between ER4 Lite and full‑spec ER4 when sourcing EdgeCore‑compatible 100G optics for open‑compute data‑center tenders? A: ER4 Lite delivers identical 40km max reach while drawing 0.5‑1W less power versus full‑spec ER4. Under HYTOPTODEVICE lab validation testing, bit‑error‑rate stays below 1E‑12 across full commercial temperature range. Distributors can prioritize this power‑saving variant for open‑compute bids where extended optical power headroom beyond 40km is unnecessary.

Q3: Can this EdgeCore‑qualified 100GBASE‑ER4L optic work over duplex OS2 single‑mode fiber for open‑compute backbone roll‑outs? A: Yes, this HYTOPTODEVICE QSFP28 ER4 Lite requires two OS2 single‑mode fiber cores for bidirectional 100G traffic, integrating four‑channel LAN‑WDM wavelengths within a single housing. Procurement teams should validate duplex fiber availability during site surveys prior to submitting bulk purchase orders for these drop‑in replacement transceivers.

Q4: Is OM‑series multimode fiber acceptable for ET7402‑ER4 equivalent QSFP28 modules used for cross‑facility open‑compute inter‑site links? A: Multimode fiber is unsuitable for this 40km transmission requirement. Even premium OM4 multimode suffers severe modal dispersion, limiting practical 100G distance to merely 100‑150 meters. HYTOPTODEVICE strongly advises end‑users deploy OS2 single‑mode exclusively; wholesalers can bundle matching fiber assemblies alongside transceiver orders for complete open‑compute project kits.

Q5: Why adopt the 1310nm LAN‑WDM wavelength grid for EdgeCore‑compatible 40km 100G metro‑backbone transceivers? A: The 1295‑1309nm LAN‑WDM window delivers typical 0.22dB/km attenuation on OS2 single‑mode fiber. HYTOPTODEVICE calibrates every individual laser channel against this wavelength standard, securing consistent optical power budget for 40km spans. System integrators gain low‑loss transmission without the high expense of C‑band DWDM components for open‑compute metro deployments.

Q6: Are duplex LC optical attenuators mandatory for short‑span links under 10 km using EdgeCore‑compatible QSFP28 ER4‑Lite transceivers? A: Attenuators are mandatory for links shorter than 10 km. Our module TX output ranges from ‑2.5~+4.5dBm and receiver overload threshold is ‑3.5dBm; unattenuated short‑span connections will exceed the overload threshold. HYTOPTODEVICE recommends buyers install 10‑15dB duplex LC attenuators to prevent receiver saturation and preserve stable link performance for short rack‑to‑rack open‑compute fabric connections.

Q7: How much chromatic dispersion safety margin do HYTOPTODEVICE EdgeCore‑compatible 100GBASE‑ER4‑Lite transceivers reserve for real‑world 40km open‑compute fiber routes? A: Every unit is pre‑characterized for OS2 fiber chromatic dispersion up to maximum 40km reach. Our factory burn‑in procedure simulates real‑world fiber dispersion conditions, maintaining post‑FEC bit‑error‑rate well below 1E‑12. This creates safety allowance for splice and connector losses frequently seen in integrator‑managed leased‑fiber open‑compute environments.

Q8: What hardware‑failure risks are triggered by excessive incoming optical power for ET7402‑ER4 alternative QSFP28 ER4‑Lite transceiver hardware? A: Over‑level receive power can permanently degrade the built‑in photodiode receiver. Field‑return statistics from HYTOPTODEVICE RMA datasets indicate roughly 60 % of faulty long‑reach 100G optical module returns stem from unattenuated short‑link operation. Distributors should pass power‑matching deployment best practices onward to their open‑compute end‑customer technical teams.

Q9: What environmental operating boundaries apply for commercial‑grade EdgeCore ET7402‑ER4 replacement optics sourced from HYTOPTODEVICE? A: Standard commercial SKU delivers stable operation within 0℃ to +70℃ cabinet ambient temperature. Each HYTOPTODEVICE unit undergoes 8‑hour high‑low temperature cycling QA testing during production. Wholesalers bidding for outdoor cabinet edge‑computing projects may inquire regarding our industrial‑grade ‑40~+85℃ variant for non‑climate‑controlled field hardware deployments.

Q10: Do HYTOPTODEVICE EdgeCore‑compatible QSFP28 ER4‑Lite transceivers satisfy global MSA and IEEE specifications for third‑party open‑switch 100G optics? A: Yes, all electrical, mechanical and optical parameters comply with IEEE 802.3 and QSFP28 MSA SFF‑8665 specifications. Complete DDM/DOM monitoring registers strictly observe MSA‑defined memory mapping. This standard‑compliance allows system integrators to perform mixed‑vendor optics coexistence inside multi‑brand open‑compute network fabrics.

Q11: What compliance paperwork is delivered together with bulk‑volume shipments of EdgeCore‑compatible 100G QSFP28 ER4‑Lite optical transceivers? A: Each bulk shipment includes CE, FCC, RoHS compliance certificates plus batch‑specific optical test data reports. HYTOPTODEVICE furnishes comprehensive document sets facilitating customs clearance and open‑compute enterprise‑project audit requirements. Global resellers may request supplementary declaration forms to satisfy regional import regulatory constraints.

Q12: What warranty and advanced‑replacement conditions apply for large‑scale open‑compute‑project bulk orders of HYTOPTODEVICE EdgeCore‑replacement 100G transceivers? A: Standard factory warranty covers early‑phase manufacturing defects supported by expedited advanced‑replacement logistics. High‑volume system‑integrator open‑compute‑projects qualify for priority stock reservation. Distributors maintaining recurring quarterly procurement volumes can open dedicated support tickets accelerating RMA handling for their end‑customer open‑switch sites.

Q13: Which periodic preventive‑maintenance actions should operators execute on deployed 40km 100GBASE‑ER4L EdgeCore‑compatible transceivers? A: Visual LC port cleaning plus insertion‑loss spot‑check every 6‑12 months is strongly advised. Contaminated fiber end‑faces cause a large proportion of slow‑degrading intermittent open‑compute‑fabric faults. HYTOPTODEVICE suggests network operators enable DDM power‑threshold alerts as part of routine O&M workflows for metro‑backbone infrastructure.

Q14: Can HYTOPTODEVICE EdgeCore‑compatible QSFP28 ER4‑Lite optics sustain error‑free links for 25‑30km intermediate‑reach colocation‑data‑center interconnect scenarios? A: Yes, the module possesses ample optical‑power margin for 25‑30km DCI use‑cases. Internal lab testing confirms error‑free stable performance even with cumulative 3‑4dB splice‑and‑connector insertion loss. This makes the part attractive for procurement teams handling geographically‑separated open‑compute colocation interconnection assignments.

Q15: Are third‑party compatible 100GBASE‑ER4‑Lite QSFP28 transceivers suitable for operator‑leased dark‑fiber metro circuits running on EdgeCore open‑switch platforms? A: Yes, HYTOPTODEVICE MSA‑compliant ER4‑Lite works reliably over standard OS2 leased dark‑fiber circuits. Our engineering group provides complimentary link‑budget calculation assistance for system‑integrator open‑compute‑customer tender bids. Always validate total measured fiber loss pre‑deployment to prevent marginal‑link issues on operator‑provided metro fiber paths

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • EdgeCore ET7402-ER4 Compatible 100G QSFP28 ER4 Lite Module | 100GBASE-ER4L 1310nm(LAN WDM) 40KM Transceiver Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE
  • Side profile MSA-certified 100G QSFP28 ER4 Optical Transceiver for Cisco data center bulk upgrade projects
  • EdgeCore ET7402-ER4 Compatible 100G QSFP28 ER4 Lite Module | 100GBASE-ER4L 1310nm(LAN WDM) 40KM Transceiver Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE
  • EdgeCore ET7402-ER4 Compatible 100G QSFP28 ER4 Lite Module | 100GBASE-ER4L 1310nm(LAN WDM) 40KM Transceiver Duplex LC/UPC Bulk Wholesale | HYTOPTODEVICE
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download