| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QDD-400-CU3M | |
| 2 | Arista Networks | CAB-D-D-400G-3M | |
| 3 | Dell | DAC-Q56DD-400G-3M | |
| 4 | Juniper | QDD-400G-DAC-3M | |
| 5 | NVIDIA/Mellanox | MCP1660-W003E26 |
| Dell Compatible |
DAC-Q56DD-400G-3M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP-DD to QSFP-DD | Max Data Rate | 400Gbps |
| Cable Length | 3m (10ft) | Wire AWG | AWG 27 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3cd, QSFP-DD MSA, CMIS 4.0 |
| Minimum Bend Radius | 35mm | Application | 400G Ethernet and InfiniBand EDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP-DD port must enable 400GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.sharp bends degrade 400G PAM4 signals and trigger link errors.
Port Installation Standard: Works only with standard QSFP-DD 400G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 400G QSFP-DD DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.







Q1: Do I need to adjust Dell OS10 port settings to bring up this Dell compatible 400G DAC cable? A: Generally no extra special port configurations are needed for this straight QSFP-DD to QSFP-DD passive DAC. Simply confirm the port speed is fixed at 400G and your Dell switch firmware is up to date. HYTOPTODEVICE pre-loads the matching EEPROM profile for smooth plug-and-play operation.
Q2: Can this Dell compatible 400G QSFP-DD twinax cable split a 400G port into multiple low-speed server interfaces? A: No, this is a straight point-to-point Dell compatible 400G DAC cable instead of a breakout variant. It cannot divide one 400G port into several lower-speed links. Please select breakout DAC cables if you require bifurcation functionality.
Q3: Is it necessary to submit my Dell switch model when ordering 400G QSFP-DD DAC cables from HYTOPTODEVICE? A: Yes, we highly recommend you provide the exact switch brand and model during ordering. Our technical team will program the correct EEPROM to bypass vendor lock-in and prevent port detection failures for your Dell deployment.
Q4: Are HYTOPTODEVICE Dell compatible 400G QSFP-DD DAC cables compliant with official MSA and IEEE industry standards? A: Absolutely. Our Dell compatible 400G QSFP-DD passive DAC follows IEEE 802.3ck and SFF-8636 MSA specifications, guaranteeing stable interoperability across standard open networking hardware in modern data centers.
Q5: What signaling modulation does this 3m Dell 400G QSFP-DD passive DAC cable adopt for data center traffic? A: This Dell compatible 400G DAC cable uses PAM4 modulation. It leverages four signal levels to transmit data, delivering higher bandwidth over copper twinax compared with traditional NRZ signaling for high-speed data center fabric.
Q6: Which is better for Dell leaf-spine deployment: passive twinax DAC or active ACC 400G copper cable? A: Passive twinax such as our 3m Dell compatible 400G DAC is zero-power and cost-effective for intra-rack runs up to 3 meters. Active copper supports longer distances but consumes port power and carries higher pricing. Most standard data center setups prefer our passive DAC.
Q7: How much port power will be consumed by this 27AWG Dell 400G QSFP-DD passive copper DAC cable? A: 0W power draw. This Dell compatible 400G DAC cable contains no signal amplification chips, so it draws zero power from Dell switch ports and helps cut overall rack power and cooling expenditure.
Q8: Is FEC mandatory for stable PAM4 links using this Dell compatible 400G DAC cable? A: It depends on your Dell OS10 version and link quality. Many 400G PAM4 copper links run with FEC enabled to add signal margin, while short, clean intra-rack connections may work without FEC. Follow Dell’s official deployment guidance for best results.
Q9: Will the weight of this 3m 27AWG Dell 400G DAC cable create connector strain on Dell switch front ports? A: Heavy copper twinax may stress QSFP-DD ports without proper support. We recommend dedicated cable brackets and strain relief accessories, especially for this 3m Dell compatible 400G DAC cable deployed inside dense Dell switch racks.
Q10: What routing tips help preserve airflow when installing this Dell compatible 400G DAC cable in high-density racks? A: Route cables neatly, avoid covering intake and exhaust vents of Dell switches, strictly follow the minimum bend radius, and do not overpack cable trays. Organized cabling keeps cooling performance stable for 400G leaf-spine fabrics.
Q11: What warranty coverage comes with HYTOPTODEVICE Dell compatible 400G QSFP-DD DAC cable for data center projects? A: HYTOPTODEVICE provides standard warranty for this Dell compatible 400G DAC cable. Units that fail under normal operating conditions qualify for RMA service; physical damage from improper handling or rough installation is excluded.
Q12: Can I get custom non-standard lengths of Dell compatible 400G DAC cable to simplify rack cable management? A: Yes, custom lengths are available via OEM order at HYTOPTODEVICE. Send your exact dimension requirements to our sales team, and we can manufacture custom 400G QSFP-DD DAC to match your clean rack layout.
Q13: Does HYTOPTODEVICE run full performance testing before shipping out Dell compatible 400G DAC cable? A: Every Dell compatible 400G DAC cable undergoes continuity, EEPROM verification and PAM4 signal integrity testing before shipment. Rigorous pre-ship testing reduces link flapping and compatibility issues for your data center rollout.
Q14: What support is available if compatibility issues appear after receiving Dell compatible 400G DAC cable? A: If our technical validation confirms the issue stems from cable compatibility, HYTOPTODEVICE supports product replacement or return. Please share your Dell switch model, OS10 firmware version and link error logs for fast troubleshooting.
Q15: Do these Dell compatible 400G DAC cables satisfy global environmental safety and hazardous substance regulations? A: Yes. All our Dell compatible 400G QSFP-DD DAC cables meet RoHS and REACH requirements, free from restricted hazardous materials, suitable for enterprise, ISP and AI data center deployment around the world.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




