| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-25G-LR-I | |
| 2 | Arista Networks | SFP-25G-LR-I | |
| 3 | Brocade | 25G-SFP28-LR-I | |
| 4 | NVIDIA(Mellanox) | MMA2L20-AR-I | |
| 5 | Juniper | SFP-25G-LR-IT | |
| 6 | Dell | SFP-25G-LR-I |
| Dell Compatible | SFP-25G-LR-I | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP28 | Max Data Rate | 25Gbps |
| Wavelength | 1310nm | Max Distance | 10km |
| Connector | Duplex LC | Transmitter Type | DFB 1310nm |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | -4.5~+2dBm | Receiver Sensitivity | < -12dBm |
| Max. Power Consumption | ≤1.2W | Receiver Overload | 2dBm |
| Protocols | SFF-8472, SFF-8402, SFF-8432, SFF-8431, CEI-28G-VSR | Operation Temperature | -40 to 85°C (-40 to 185°F) |
Usage Guidelines & Best Practices
Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.
Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade 25GBASE-LR 10KM module performance.
Distance & Link Budget: Supports up to a 10 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.
Port Compatibility Check: This optic only works on native 25G SFP28 ports. It can physically insert into SFP+ slots but will not negotiate 25G speed. Confirm your hardware or multi-vendor switch supports 25GBASE-LR standard before plugging in
Industrial Temperature Handling: This industrial-grade module supports -40℃ ~ +85℃ wide-temperature operation. Ensure the cabinet ventilation and heat dissipation are maintained in field deployments; avoid direct exposure to sunlight, moisture, dust or corrosive gas to extend service life.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1.Validated Juniper Networks Hardware & Firmware
2.Multi‑Brand Cross Interoperability
Features pre-programmed multi-vendor EEPROM compatibility. Rigorously tested to ensure flawless signal transmission, stable link integrity, and full CLI recognition across diverse switch and router ecosystems.
3.Free Value-Added Services
Custom EEPROM programming for multi-platform compatibility
Pre-bulk sample testing for project validation
Private label customization and deployment guides
Strict batch quality control
EEPROM configuration for legacy network environments
Free EEPROM recoding plus 24/7 technical support
Primary Application Scenarios
Connectivity Solutions(Applications)

The Core Features
1. Low Power & High Port Density

2. Host Validated for Reliable Interoperability
Each SFP28 25G transceiver plugs into target host switches directly without unsupported transceiver alarms and reduces project debugging time. Specific Compatibility Video available upon request.


Q1: Is enabling RS-FEC mandatory on Dell PowerSwitch ports to achieve full 10km fiber reach with compatible industrial SFP28 25G LR transceiver? A: NO. RS-FEC is not mandatory for this HYTOPTODEVICE Dell SFP-25G-LR-I compatible SFP28 25G LR module to reach full 10km transmission. The transceiver can run stable 25G links over G.652 single-mode fiber without RS-FEC; enabling RS-FEC only adds extra link margin for fiber runs with multiple splices or poor cable quality.
Q2: What optical power budget headroom does Dell compatible industrial SFP28 25G LR optic offer for 10km single-mode fiber links? A: YES. This HYTOPTODEVICE industrial SFP28 25G LR module has transmit power of -4.5 ~ +2 dBm and receiver sensitivity of -12 dBm. The optical power budget reserves enough headroom to absorb fiber attenuation, splice loss and connector insertion loss for a complete 10km G.652 SMF deployment.
Q3: What maximum power draw can I expect from industrial SFP28 25G LR transceiver under continuous +85°C thermal stress? A: YES. Under full thermal stress at +85℃, the maximum power consumption of this HYTOPTODEVICE Dell compatible SFP28 25G LR stays within SFP28 MSA defined power limits. This design prevents overheating even in densely packed industrial cabinets and edge network enclosures.
Q4: How does Dell compatible industrial SFP28 25G LR transceiver handle chromatic dispersion across G.652 single-mode fiber at 10km? A: YES. The 1310nm DFB optical engine built inside HYTOPTODEVICE’s SFP-25G-LR-I compatible SFP28 25G LR delivers strong chromatic dispersion tolerance on G.652 fiber. At 10km distance, dispersion impact remains minimal and will not degrade 25G signal integrity.
Q5: Will factory-calibrated industrial SFP28 25G LR transceiver produce excessive transmitter deterministic jitter (DDJ) on Dell PowerSwitch hardware? A: NO. This HYTOPTODEVICE Dell compatible SFP28 25G LR transceiver is factory calibrated to keep deterministic jitter (DDJ) under IEEE 802.3cc specification limits. High DDJ is filtered out during production testing to guarantee clean eye diagrams and reliable optical signal delivery.
Q6: Can industrial grade SFP28 25G LR optic cold boot and bring up fiber links instantly at -40°C for Dell edge network switches? A: YES. HYTOPTODEVICE’s Dell SFP-25G-LR-I compatible SFP28 25G LR module supports reliable cold start at -40℃. It can power on and establish fiber links normally after internal initialization at the minimum rated industrial operating temperature.
Q7: What link performance will Dell compatible industrial SFP28 25G LR transceiver deliver under fast fluctuating ambient temperature in field deployments? A: YES. This HYTOPTODEVICE SFP28 25G LR module integrates DFB laser temperature compensation circuits. It withstands rapid ambient temperature swings and maintains stable optical power and signal performance without link drop or BER spikes for industrial and 5G edge networks.
Q8: Are industrial-grade LC dust protection caps included with wholesale SFP28 25G LR transceivers compatible with Dell SFP-25G-LR-I? A: YES. Every HYTOPTODEVICE Dell compatible SFP28 25G LR module ships with industrial-grade optical dust caps. These caps meet industrial handling standards to protect LC ports from dust and contamination during storage, shipping and field installation.
Q9: What ESD protection level is built into the electrical edge connector of Dell compatible industrial SFP28 25G LR transceiver? A: YES. This HYTOPTODEVICE SFP28 25G LR transceiver has built-in ESD protection circuitry on the electrical edge connector meeting industry standards. It shields internal chips from electrostatic damage during hot plug operations on Dell PowerSwitch switches.
Q10: Does HYTOPTODEVICE run full temperature cycling burn-in testing for every batch of Dell compatible industrial SFP28 25G LR transceivers before delivery? A: YES. HYTOPTODEVICE performs 100% full temperature cycle burn-in testing on each batch of this Dell SFP-25G-LR-I compatible SFP28 25G LR module before shipment. Our 3-temperature aging screening removes marginal units, and real test reports plus lab test videos can be shared upon buyer request.
Q11: What link behavior will appear when pairing Dell compatible industrial SFP28 25G LR transceiver with host auto-negotiation functions? A: NO. This HYTOPTODEVICE SFP28 25G LR is a fixed-rate 25GBASE-LR transceiver and does not support auto-negotiation. The Dell host port must be manually set to fixed 25G speed to successfully bring up the optical fiber link.
Q12: Does hot swapping Dell compatible industrial SFP28 25G LR transceiver trigger large inrush current and reset Dell host power supplies? A: NO. This HYTOPTODEVICE SFP28 25G LR module integrates inrush current limiting circuitry. Hot live insertion will not generate excessive surge current to trigger Dell host power supply resets or automatic port shutdown events.
Q13: Can the onboard microcontroller firmware avoid lockup states during repeated host power cycles for Dell compatible industrial SFP28 25G LR transceiver? A: YES. The firmware inside HYTOPTODEVICE’s Dell compatible SFP28 25G LR module includes watchdog and power cycle reset logic. It prevents state lockup during repeated power on/off cycles in data center and industrial edge deployments.
Q14: What supporting documents can bulk buyers use to verify HYTOPTODEVICE SFP28 25G LR optics are genuine industrial grade instead of relabeled commercial stock? A: Buyers can validate product authenticity using our 3-temperature cycling test reports and DDM log data. HYTOPTODEVICE can provide real lab test videos and full test documentation to prove these Dell compatible SFP28 25G LR modules are true industrial grade, not relabeled commercial optics.
Q15: Is the Dell compatible industrial SFP28 25G LR optical transceiver certified as IEC 60825-1 Class 1 laser safe? A: YES. This HYTOPTODEVICE SFP28 25G LR transceiver is Class 1 laser certified under IEC 60825-1. Under normal operating conditions, operators face zero risk of exposure to hazardous laser radiation.
Packaging & Custom OEM Solutions
Every SFP28 25G module arrives in its own ESD-safe sealed bag, fully protected against static damage from the moment it leaves our line. Stock is on the shelf, so orders ship the same day. Distributors, wholesalers, and integrators can also scale under their own name — we handle custom logo printing, private labeling, and made-to-order packaging, so you can launch, grow, and defend your brand without investing in your own manufacturing line.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






