• hytoptodevice 200G QSFP56 to QSFP56 passive direct attach copper cable for data center
  • Bulk Wholesale 200G QSFP56 passive copper twinax cable for data center from HYTOPTODEVICE manufacturer
  • hytoptodevice low power consumption 200G QSFP56 dac cable for data center
  • Compatible 200G QSFP6 passive DAC twinax cable for data center from HYTOPTODEVICE
  • hytoptodevice 200G QSFP56 to QSFP56 passive direct attach copper cable for data center
  • Bulk Wholesale 200G QSFP56 passive copper twinax cable for data center from HYTOPTODEVICE manufacturer
  • hytoptodevice low power consumption 200G QSFP56 dac cable for data center
  • Compatible 200G QSFP6 passive DAC twinax cable for data center from HYTOPTODEVICE

Dell DAC-Q56-200G-0.5M Compatible 200G QSFP56 to QSFP56 PAM4 Passive Copper Twinax Cable 0.5m(1.67ft) | HYTOPTODEVICE

Source HYTOPTODEVICE 200G PAM4 QSFP56 passive copper twinax cable, 0.5m DAC-Q56-200G-0.5M equivalent, pre-coded EEPROM for Dell PowerSwitch OS. In stock for fast delivery, factory direct price, bulk purchase available for distributors, resellers and system integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco Q56-200-CU50CM
2 Arista Networks CAB-Q56-Q56-0.5M
3 Dell DAC-Q56-200G-0.5M
4 NVIDIA/Mellanox  MCP1650-V00AE30 
5 Generic QSFP56-200G-CUxM
Description

Dell DAC-Q56-200G-0.5M Compatible 200G QSFP56 to QSFP56 PAM4 Passive Copper Twinax Cable 0.5m(1.67ft) | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 0.5m 200G QSFP56 to QSFP56 PAM4 passive copper twinax cable is a direct drop-in replacement for Dell DAC-Q56-200G-0.5M. Built to SFF-8636 MSA and IEEE 802.3cd 200GBASE-CR4 standard, this passive twinax cable uses flexible 30AWG copper conductors, delivering full 200Gbps bandwidth over 4×50Gbps PAM4 lanes with zero power consumption. It is hot-swappable and pre-programmed with Dell validated EEPROM signature for smooth recognition on Dell PowerSwitch OS firmware. Compact and highly flexible, this cable is widely used for in-rack 200G short links, AI server to leaf switch direct connection, HPC rack internal interconnection, high-density data center fabric deployment. HYTOPTODEVICE supports spot purchase, bulk wholesale, OEM private labeling, custom EEPROM programming and custom length service for this 200G QSFP56 PAM4 passive copper twinax cable.

Key Technical Specifications

Dell  Compatible
DAC-Q56-200G-0.5M
Vendor Name HYTOPTODEVICE
Connector QSFP56 to QSFP56 Max Data Rate 200Gbps
Cable Length 0.5m (1.67ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.25W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols IEEE802.3cd, SFF-8436
Minimum Bend Radius 35mm Application 200G Ethernet and InfiniBand HDR

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Setting: Host QSFP56 port must enable 200GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.

  • Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.

  • Port Installation Standard: Works only with standard QSFP56 200G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.

  • Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Dell Hardware & Firmware

  • Dell PowerSwitch Z9664F-ON, S5648F-ON, Z9432F-ON, S5448F-ON series leaf-spine switches
  • Dell PowerEdge servers with 200G QSFP56 NIC adapters for AI and HPC workloads
  • Dell MX modular chassis platforms with QSFP56 fabric ports
  • Firmware: Dell OS10 10.5.0.0 and newer

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 200G QSFP56 passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 

• Short 0.5m in-rack 200G server-to-leaf switch direct links
• High-density AI compute rack internal interconnection
• HPC cluster local rack cabling for low latency workloads
• 200G leaf-spine fabric short-distance internal patch
• Data center high-speed network upgrade and hardware refresh
• Stock sourcing for distributors, resellers and system integrators


Connectivity Solutions(Applications) 

1. 200G to 200G Direct Link for Switch-Switch
HYTOPTODEVICE 200GBASE-CR4 passive copper twinax cable realize Native 200G PAM4 Transmission


2. 200G to 200G Direct Link for Switch-NIC
Factory wholesale compatible 200G QSFP56 passive copper twinax cable HYTOPTODEVICE



The Core Feature

1. Cost-Effective Ultra-Short Connectivity

Using twinax copper, the 200G passive copper cable replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

Short reach 200GBASE-CR4 QSFP56 passive DAC cable 0.5m for AI rack

2. Ultra-Low Power, Maximum Energy Efficiency

The 100g qsfp28 passive copper twinax cable draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 100G link for short-reach connections — within a rack or across adjacent racks.

200G QSFP56 to QSFP56 passive twinax DAC for data center switch

3.Host-Device Tested for Proven Interoperability

Every 100g passive copper twinax cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits? Compatibility Video available upon request.

hytoptodevice wholesale 200G QSFP56 twinax cable for data center

4. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  QSFP56  to QSFP56 200g qsfp56 dac cable for switches

FAQ

Q1: Will this 200G breakout cable work with my Cisco, Arista, or Juniper switches? A1: This straight 200G QSFP56 DAC cable works on MSA-compliant QSFP56 ports of Cisco, Arista and Juniper switches. HYTOPTODEVICE pre-writes matched EEPROM for Dell OS10, delivering stable cross-brand interoperability for your multi-vendor data center fabric.

Q2: Is this 200G QSFP56 cable backward compatible with older 40G or 100G QSFP ports? A2: It is not natively backward compatible. QSFP56 uses 50G PAM4 per lane while QSFP+/QSFP28 use NRZ signaling, and electrical pinout differs. You may reconfigure port speed only if your Dell switch hardware supports rate adaptation.

Q3: Will using a third-party DAC cable void my network hardware manufacturer's warranty? A3: Properly qualified third-party DAC cables generally do not void OEM hardware warranty. All HYTOPTODEVICE 200G QSFP56 twinax cables pass strict signal tests and follow MSA standards to reduce compatibility risks for Dell PowerSwitch deployments.

Q4: Will this cable support standard Digital Diagnostic Monitoring (DDM/DOM)? A4: Yes, this Dell compatible 200G QSFP56 DAC supports standard DDM/DOM readout. The pre-programmed EEPROM reserves DDM registers, letting you monitor link status directly on Dell OS10.

Q5: Are these cables compliant with industry standards? A5: Yes, our 200G QSFP56 passive copper twinax cables comply with MSA, IEEE 802.3cd, RoHS and REACH. HYTOPTODEVICE runs batch verification to keep every shipment aligned with global data center cabling requirements.

Q6: What modulation technology does a 200G QSFP56 DAC cable use? A6: It adopts PAM4 4-level pulse amplitude modulation. This HYTOPTODEVICE 200GBASE-CR4 cable aggregates four 50G PAM4 lanes to hit 200Gbps, offering higher bandwidth density than traditional NRZ signaling.

Q7: What is the maximum recommended cable length for passive 200G copper twinax cables? A7: The reliable maximum length for passive 200GBASE-CR4 twinax is 3 meters. PAM4 has tighter signal margin, so we supply 0.5m, 1m, 1.5m, 2m and 3m standard lengths for in-rack AI and HPC connections.

Q8: How does latency compare between 200G DAC cables and fiber optic solutions? A8: 200G passive DAC has lower latency than fiber. Copper twinax avoids optical conversion delay, making this HYTOPTODEVICE 200G QSFP56 cable ideal for low-latency AI training and high-frequency trading workloads.

Q9: What wire gauge (AWG) is typically used for 200G twinax cables? A9: 30AWG and 26AWG are common for 200G twinax. This 0.5m Dell compatible DAC uses 30AWG for superior flexibility; 26AWG is reserved for longer passive runs up to 3m with less signal attenuation.

Q10: Can this cable handle heavy, continuous line-rate data traffic without dropping packets? A10: Yes, it supports sustained line-rate 200G traffic without packet loss. Every HYTOPTODEVICE 200G QSFP56 DAC undergoes eye diagram testing to guarantee signal integrity under full load.

Q11: How flexible is a 200G copper twinax cable compared to a 100G cable? A11: 200G PAM4 twinax is slightly less tolerant of sharp bends than 100G NRZ DAC. Our 30AWG 200G cable still offers good flexibility for dense racks, but must follow the 35mm minimum bend radius rule.

Q12: What kind of latching mechanism do these connectors use? A12: These QSFP56 connectors adopt standard pull-tab latching design. The pull tab on this HYTOPTODEVICE 200G DAC enables easy, safe hot swap without damaging Dell switch ports during cabling maintenance.

Q13: Can I run this cable between two different server racks? A13: No, this 0.5m short passive twinax is designed only for in-rack links. It cannot reach across separate racks; select active optical cables (AOC) if you need inter-rack 200G connections.

Q14: What color options are available for the outer cable jacket? A14: Black is our standard jacket color for this Dell DAC-Q56-200G-0.5M compatible DAC. HYTOPTODEVICE supports custom jacket color requests for bulk orders and OEM projects.

Q15: What kind of warranty comes with these cables? A15: This 200G QSFP56 passive copper twinax cable carries our standard multi-year product warranty. HYTOPTODEVICE provides responsive RMA support for wholesale buyers and system integrators.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • hytoptodevice 200G QSFP56 to QSFP56 passive direct attach copper cable for data center
  • Bulk Wholesale 200G QSFP56 passive copper twinax cable for data center from HYTOPTODEVICE manufacturer
  • hytoptodevice low power consumption 200G QSFP56 dac cable for data center
  • Compatible 200G QSFP6 passive DAC twinax cable for data center from HYTOPTODEVICE
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download