| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-4SFP25-CU3M | |
| 2 | Arista Networks | CAB-Q28-S28-3M | |
| 3 | Brocade | 100G-Q28-S28-C-0301 | |
| 4 | Huawei | QSFP-4SFP25G-CU3M | |
| 5 | Juniper | QFX-Q-S-DAC-3M | |
| 6 | Dell | DAC-Q28-4SFP28-25G-3M |
| Dell Compatible |
DAC-Q28-4SFP28-25G-3M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP28+ to 4 x SFP28 | Max Data Rate | 100Gbps |
| Cable Length | 3m (10ft) | Wire AWG | AWG 26 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3, QSFP28 MSA, SFF-8665 |
| Minimum Bend Radius | 50mm | Application | 100G to 2x 25G Ethernet, Data Centers |
Usage Guidelines & Best Practices
Mandatory Port Breakout Configuration: Ensure the host QSFP28 port supports channelization. Enable breakout mode (4x25G) via the switch CLI before connecting the cable.
Cabling Requirements: Do not exceed the minimum 50mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Do not mix this breakout DAC with straight QSFP28 to QSFP28 DAC configuration.
Hot‑swap rule:Never pull or tug directly on the individual breakout legs. Always use the integrated pull-tab or bale latch when inserting or removing connectors.
Operating Environment: 0‑70℃, indoor cabinet deployment only.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 100G QSFP28 to 4 x 25G SFP28 passive DAC breakout cable can interoperate with mainstream network brands including Arista, Intel, Juniper, Dell, NVIDIA Mellanox and IBM, for mixed-vendor rack stacking and server fabric expansion.





Q1: Can this Dell compatible 100G breakout DAC work in mixed vendor data center fabrics? A1: Yes, it supports multi-vendor fabrics with breakout-capable switches. HYTOPTODEVICE preloads custom EEPROM signatures on this passive direct attach copper breakout cable to avoid transceiver alarms on Dell, Cisco and Juniper platforms.
Q2: Can I plug this 100G QSFP28 breakout cable into legacy QSFP+ ports? A2: No, this passive direct attach copper breakout cable is built exclusively for QSFP28 interfaces. QSFP+ has different electrical specs and pin definition and cannot establish stable 25G breakout links.
Q3: Is it possible to split this 100G breakout cable for connection to 10G server adapters? A3: No, each breakout pigtail is locked at native 25G speed. This passive direct attach copper breakout cable requires 25G SFP28 ports and cannot downshift to 10G for older NIC hardware.
Q4: Do Dell locked OS10 switches require vendor-specific coded breakout DAC cables? A4: Yes, Dell OS10 validates transceiver EEPROM data by default. HYTOPTODEVICE programs each passive direct attach copper breakout cable with Dell-compatible codes to skip unsupported-transceiver warnings.
Q5: Can different brands of 25G SFP28 NICs run together on the four breakout legs? A5: Yes, mixed-brand NICs are allowed if they comply with MSA 25GBASE-CR standards. HYTOPTODEVICE carries out cross-NIC compatibility testing to guarantee stable performance of this passive direct attach copper breakout cable.
Q6: What line rate will each of the four SFP28 breakout ports deliver? A6: Each breakout leg delivers a fixed 25Gbps line rate. This passive direct attach copper breakout cable evenly divides the 100G QSFP28 bandwidth across four independent 25G channels.
Q7: What is the maximum reliable run length for passive 25G twinax breakout cables? A7: The stable transmission limit for passive 25G twinax breakout design is 5 meters. HYTOPTODEVICE stocks this passive direct attach copper breakout cable in 0.5m,1m,3m and 5m standard lengths.
Q8: How much latency will this 25G breakout DAC add in Dell HPC clusters? A8: Typical copper twinax latency is roughly 0.6 ns per meter. This passive direct attach copper breakout cable has no signal amplifier chips, delivering ultra-low latency ideal for Dell AI and HPC workloads.
Q9: What wire gauge (AWG) is used in this cable, and does it affect flexibility? A9: Common gauges range from 26AWG to 30AWG. Thinner gauges such as 30AWG deliver better flexibility for dense cable management, while 26AWG supports runs up to 3 meters, and 24AWG is required for stable 5-meter passive links. HYTOPTODEVICE supplies the correct AWG for every passive direct attach copper breakout cable length you order.
Q10: Will 25GBASE-CR passive breakout DAC automatically negotiate speed with connected devices? A10: No, passive 25GBASE-CR twinax does not support auto-negotiation. You need to manually set both ends to fixed 25G speed before activating this HYTOPTODEVICE breakout cable.
Q11: What bend rules apply when routing this breakout cable inside dense Dell server racks? A11: Moderate routing flexibility is available, yet sharp bends are prohibited. Maintain the 55mm minimum bend radius to protect internal twinax conductors of this passive direct attach copper breakout cable.
Q12: Does each SFP28 pigtail have clear lane marking for easy cabling troubleshooting? A12: Yes, every SFP28 pigtail has permanent laser marking for Lane 1 to Lane 4. HYTOPTODEVICE marks each tail of this passive direct attach copper breakout cable to simplify cabling audit and fault tracing.
Q13: Can this 3m breakout DAC span between separate server racks in the Dell fabric? A13: It works for short adjacent rack links within its 3-meter total length. This passive direct attach copper breakout cable is designed for in-row rack connections instead of long cross-room cabling.
Q14: Can I get custom jacket colors for bulk orders of this Dell breakout DAC? A14: Black jacket is the standard stock option. HYTOPTODEVICE supports custom jacket colors for bulk purchases of this passive direct attach copper breakout cable to match your site’s color coding policy.
Q15: Can HYTOPTODEVICE produce non-standard custom lengths for this 100G to 4x25G breakout cable? A15: Custom non-standard lengths are available on bulk orders. Contact HYTOPTODEVICE sales team for quotation and lead time of custom-length passive direct attach copper breakout cable.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




