Dell 470-ACEX Compatible 25G SFP28 Passive Copper Twinax Cable 1.5m (5ft) | 25GBASE-CR DAC Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE 1.5m
25G SFP28 passive copper twinax cable serves as a fully interchangeable substitute for Dell 470-ACEX. It complies strictly with 25GBASE-CR, SFF-8402 and IEEE 802.3by standards to deliver stable 25.78125Gbps mid-length intra-rack connections. This passive twinax DAC consumes no operating power and supports hot-swap operation. We preload Dell-specific EEPROM profiles to avoid unsupported transceiver alerts on Dell OS10 platforms. FEC is optional under normal operating conditions for this 1.5-meter copper link. Ready stock, sample validation and OEM branding are offered for distributors and enterprise project buyers.
Key Product Parameters
| Dell Compatible |
470-ACEX |
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP28 to SFP28 |
Max Data Rate |
25Gbps |
| Cable Length |
1.5m (5ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.5W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000 |
| Minimum Bend Radius |
21mm |
Application |
25G Ethernet, Data Center, 5G Wireless |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP28 25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated Dell Hardware & Firmware
- Dell PowerSwitch S5224F-ON, S5248F-ON, Z9264F-ON, S4100 series switches running OS10
- Dell PowerSwitch SN2410, SN2720, SN4700 leaf-spine switch platforms
- Dell PowerEdge R640, R650, R660, C4140, C6600 server series with SFP28 NIC ports
- Dell MX5108n blade switches for PowerEdge MX7000 chassis
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this 25G SFP28 DAC cable can interoperate with mainstream network brands including Cisco, Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
- Intra-rack ToR leaf-to-server connections for Dell OS10 leaf-spine fabrics
- Low-latency NVMe over Fabrics storage cluster interlinks
- Virtualization, KVM and VMware hypervisor host networking
- HPC cluster short-range node interconnections
- Server rack local backup and replication networking
- Cost-saving direct replacement for original Dell 470-ACEX 25G twinax DAC cabling
- High-density rack cabinet internal switch stacking links
- Dell PowerEdge blade chassis internal fabric interconnection
Connectivity Solutions(Applications)
1. 25G to 25G Direct Link for Switch-Switch
2. 25G to 25G Direct Link for Switch-NIC
The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the 25gb SFP28 Passive DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive 25g SFP28 passive DAC cable draws lower power consumption, reducing heat and energy costs in dense racks, while delivering a cost-effective, high-speed and low-latency 25G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP28 passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Will this Dell-compatible 25G SFP28 passive copper twinax cable trigger transceiver alarms on Dell OS10?
A: It will not trigger default transceiver alerts on Dell OS10. This HYTOPTODEVICE 25G SFP28 passive copper twinax cable ships with Dell 470-ACEX matching EEPROM, pre-verified on PowerSwitch OS10 to skip unsupported transceiver warnings.
Q2: Can this 25G twinax DAC link Dell PowerSwitch leaf switches to PowerEdge rack servers?
A: This point-to-point connection works reliably with matched 25GBASE-CR settings. HYTOPTODEVICE 25G SFP28 passive copper twinax cable is validated for Dell OS10 switches and PowerEdge SFP28 server NICs for stable intra-rack connectivity.
Q3: What risk exists if untested generic 25G DAC cables are deployed in Dell OS10 fabrics?
A: Unvalidated generic DACs commonly cause OS10 log warnings, random link flaps and silent CRC errors. Every HYTOPTODEVICE 25G SFP28 passive copper twinax cable goes through OS10 platform validation before shipment to reduce fabric downtime.
Q4: Can I order custom EEPROM coding if I mix Dell and other vendor hardware in one fabric?
A: Custom mixed-vendor EEPROM programming is available on request. HYTOPTODEVICE can tailor the signature of this 25G SFP28 passive copper twinax cable to suit multi-vendor Dell-based data center deployments.
Q5: How does Dell OS10 handle FEC negotiation for passive 25G SFP28 DAC links?
A: 25GBASE-CR passive DAC links do not support auto FEC negotiation on OS10. You must manually set identical RS-FEC or BASE-R FEC on peer ports; HYTOPTODEVICE 25G SFP28 passive copper twinax cable supports both FEC modes.
Q6: Can mismatched FEC settings on Dell OS10 ports create hidden packet loss without showing a down link?
A: Yes, FEC mismatch can cause invisible packet loss while the interface status remains up. Always align FEC configuration on both sides when deploying HYTOPTODEVICE 25G SFP28 passive copper twinax cable on Dell switches.
Q7: Why cannot passive 25G SFP28 twinax DAC support runs longer than 5 meters?
A: 25G electrical twinax signals suffer fast insertion loss over copper conductors. Beyond 5m, attenuation exceeds IEEE 25GBASE-CR limits; HYTOPTODEVICE supplies passive 25G SFP28 passive copper twinax cable in lengths from 0.5m to 5m.
Q8: What practical difference will I see between 30AWG and 24AWG 25G DAC for Dell dense racks?
A: 30AWG delivers sufficient signal performance and better flexibility for tight Dell rack layouts, while 24AWG has lower loss but much stiffer routing. HYTOPTODEVICE selects 30AWG twinax for this 1.5m 25G SFP28 passive copper twinax cable.
Q9: What cable routing challenges do thick 24AWG 25G DAC cables bring to Dell PowerSwitch cabinets?
A: Rigid 24AWG cables are hard to route inside compact Dell leaf racks and put mechanical stress on SFP28 ports. HYTOPTODEVICE’s 30AWG 25G SFP28 passive copper twinax cable eases cable management in high-density Dell chassis.
Q10: When should I pick 25G AOC instead of passive 25G SFP28 twinax DAC for Dell fabrics?
A: Select 25G AOC for cross-row links or distances over 5 meters. HYTOPTODEVICE passive 25G SFP28 passive copper twinax cable is the cost-effective zero-power choice for Dell same-rack connections under 5m.
Q11: How much latency reduction can passive 25G DAC deliver compared with fiber transceivers in Dell HPC clusters?
A: Passive 25G DAC cuts roughly 30–60ns latency by removing optical-electrical conversion. HYTOPTODEVICE 25G SFP28 passive copper twinax cable fits Dell low-latency HPC, NVMe storage and trading workloads.
Q12: Can this 25G SFP28 DAC run at full 25G speed when plugged into Dell legacy SFP+ 10G ports?
A: Full 25G operation is impossible on SFP+ interfaces. Electrical signaling and pinout standards differ, both ends must use native SFP28 ports to run this HYTOPTODEVICE 25G SFP28 passive copper twinax cable at 25G.
Q13: What firmware prerequisites apply for QSFP28 breakout 4x25G DAC on Dell OS10 switches?
A: Breakout functionality relies on OS10 firmware version and port split license. Breakout DAC is a separate product category from this fixed point-to-point HYTOPTODEVICE 25G SFP28 passive copper twinax cable.
Q14: Why do Intel E810 NICs paired with Dell OS10 sometimes fail link-up with cheap generic 25G DAC?
A: Link failures usually stem from incomplete or invalid EEPROM identity data. HYTOPTODEVICE validates this 25G SFP28 passive copper twinax cable on Intel E810 and Mellanox NICs to resolve handshake issues in Dell server environments.
Q15: What cycle testing does HYTOPTODEVICE complete on SFP28 pull tabs before shipping these Dell-compatible DACs?
A: Our SFP28 latch and pull-tab assembly passes 500+ plug-and-extract durability tests. Reinforced plastic pull tabs are fitted to this 25G SFP28 passive copper twinax cable to reduce breakage during frequent Dell data center re-cabling.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration


Connectivity Solutions(Applications):
Scenarios 1:25G-to-25G Link for Switch-to-Switch

Scenarios 2:25G-to-25G Link for Switch-to-Server

FAQ for Cisco SFP-H25G-CU1.5M Compatible DAC SFP28 25G Cable
Q1:Is this 25G SFP28 cable natively backward compatible with 10G SFP+ ports? A:Although SFP28 and SFP+ connectors are physically identical, standard SFP28 25G DAC is programmed as high-speed devices. Most ports that support only 10G cannot recognize 25G-coded cables due to a mismatch in EEPROM identifiers. Most Dell S-Series 25G ports support dual-speed operation at 10G and 25G.
Q2:How far can I run a SFP28 25G DAC cable?A:Because DAC cables are made of dual-core copper wire, they are relatively heavy and experience signal attenuation at a faster rate than fiber optic cables; therefore, the actual transmission distance for SFP28 25G DAC cable is limited to 7 meters or less.
Q3:What is the power consumption of this passive SFP28 25G DAC compared to 25G SR optics? A: HYTOPTODEVICE passive 25G DAC consumes near zero power (≤0.5W) and generates no heat. By comparison, a pair of 25G SR fiber optical transceivers consumes approximately 1.5W to 2.0W of power. For a rack containing 48 servers, switching to the HYTOPTODEVICE 25G DAC can save nearly 100W of power and significantly reduce the cooling load.
Q4:Will this 25G cable cause an "Unsupported Transceiver" error in HPE switches?A:No. DAC Manufacturer China HYTOPTODEVICE uses precise HPE EEPROM coding. Your device will recognize this 25g sfp28 cable as a genuine HPE 844471-B21, ensuring 100% compatibility.
Q5:Does 25G SFP28 DAC use Multi-mode or Single-mode fiber?A:Neither. The DAC(Direct-Attach Copper) is a copper cable. using a twinaxial copper architecture (Twinax) to transmit electrical signals directly, no light signals.There are not lasers or optical glass in DAC cable, it is much cheaper than fiber optics.
Q6:Will this cable trigger "Unsupported Transceiver" alarms in Junos?A:No. HYTOPTODEVICE cables are pre-programmed and feature a genuine Juniper-specific EEPROM signature. Your switch will recognize the cable as a genuine Juniper JNP-25G-DAC-1M, ensuring zero CLI warnings and full diagnostic support.
Q7:Is 25G SFP28 DAC hot-swappable?A:HYTOPTODEVICE SFP28 25G DAC is hot-pluggable, hot Pluggable SFP28 Compliant.you can plug or unplug the passive DAC, while the device is powered on without damaging the hardware.
Q8:who makes the best 25G SFP28 DAC cable?A: Transceiver Manufacturer China HYTOPTODEVICE is the excellent provider.Sorce factory,reliable quality, 100% compatibiltiy.fast delivery and quick response.HYTOPTODEVICE send a tool that allows you to re-program the compatibility of your cables yourself.
Q9:Is 30AWG wire gauge enough for 25G at 1 meter?A: Yes,That is absolutely correct. For a transmission distance of 1 meter, 30 AWG cable strikes the optimal balance between flexibility (for easy cabling within Juniper racks) and signal integrity, exceeding the requirements for 25GbE copper links specified in the IEEE 802.3by standard.
Q10:What is the difference between "Passive" and "Active" DAC?There are distinct differences between Passive and Active DAC.The Passive DAC has no signal amplification. its lengths is under 7m. With zero power consumptions,it cost is cheaper. The Active DAC contains a chip to boost the signal. Used for slightly longer copper runs (up to 10m-15m) and is generally thinner/more flexible.
Q11:Can I plug a 25G DAC into a 10G SFP port?A:No. SFP28 (25G) ports can often accept 10G transceivers, but a 10G SFP port cannot scale up to recognize a 25G DAC cable. You should Make sure the cable speed matches the port with the lowest rated speed.
Quality Assurance:Your Trusted Optical Transceiver Source
HYTOPTODEVICE is a vertically integrated manufacturer of high-performance optical transceivers. By controlling core materials at the source, we ensure every SFP module meets the highest standards of reliability and customization.
-
Vertical Integration: In-house core material production ensures a stable, self-sufficient supply chain for all optical modules.
-
Total Traceability: End-to-end oversight from raw components to final transceiver assembly guarantees 100% controllability.
-
Bespoke Solutions: Expert-led R&D provides customized SFP transceiver designs tailored to your specific technical needs.
-
24-Hour Response: Our technical team guarantees a primary response to any inquiry or quality concern within 24 hours.
Carrier-Grade Quality. Factory-Direct Control. Rapid Response.
Quality Certification & Compliance:
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing:

100% 3rd Party Compatible:

Partial Test Demonstration:

Others:



