• source third-party compatible QSFP-40G-LR4 replacement module from hytoptodevice
  • 40GBASE-LR4 10km duplex LC SMF transceiver from hytoptodevice
  • hytoptodevice compatible 40GBASE-LR4 10km duplex LC SMF transceiver module
  • Custom CWDM4 QSFP+ 40G LR4 optical module manufacturer for data center project procurement
  • source third-party compatible QSFP-40G-LR4 replacement module from hytoptodevice
  • 40GBASE-LR4 10km duplex LC SMF transceiver from hytoptodevice
  • hytoptodevice compatible 40GBASE-LR4 10km duplex LC SMF transceiver module
  • Custom CWDM4 QSFP+ 40G LR4 optical module manufacturer for data center project procurement

D-Link DEM-QX10Q-LR4 Compatible QSFP+ 40G LR4 Module | 40GBASE-LR4 1310nm(CWDM4)10km Duplex LC SMF Bulk Wholesale

Buy D-Link DEM-QX10Q-LR4 compatible QSFP+ 40G LR4 transceiver from HYTOPTODEVICE manufacturer. This 40GBASE-LR4 CWDM4 optic transmits up to 10km over OS2 single mode fiber with duplex LC. Bulk wholesale available, custom EEPROM coding for D-Link enterprise and data center switches.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QSFP-40G-LR4
2 APRESIA  H-LR4-QSFP+
3 Alcatel-Lucent  QSFP-40G-LR 
4 Arista Networks  QSFP-40G-LR4
5 Brocade  40G-QSFP-LR4 
6 Cisco Meraki  MA-QSFP-40G-LR4
7 D-Link  DEM-QX10Q-LR4 
8 DELL  QSFP-40G-LR4
9 Extreme  10320
10 Gigamon  QSF-503 





Description

 D-Link DEM-QX10Q-LR4 Compatible QSFP+ 40G LR4 Module | 40GBASE-LR4 1310nm(CWDM4)10km Duplex LC SMF Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE manufactures and supplies D-Link DEM-QX10Q-LR4 compatible QSFP+ 40G LR4 optical transceivers. Built to 40GBASE-LR4 CWDM4 standard at 1310nm wavelength band, this duplex LC module delivers stable 10km transmission over OS2 single-mode fiber. It serves network resellers, system integrators and bulk purchasers for enterprise core backbone and inter-building fiber links. Preloaded D-Link optimized EEPROM profiles eliminate vendor lock transceiver alerts. It supports real-time DDM diagnostic monitoring and hot-swap operation. Flexible MOQ and custom EEPROM programming services are offered for bulk orders.

Key Technical Specifications 

 D-Link Compatible DEM-QX10Q-LR4 Vendor Name HYTOPTODEVICE
Form Factor QSFP+ Max Data Rate 44.6Gbps (4x 11.2Gbps)
Wavelength 1310nm Max Distance 10km
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type PIN
TX Power -7.0~2.3dBm Receiver Sensitivity < -13.7dBm
Power Consumption ≤3.5W Modulation NRZ
Protocols OTN OTU3, 40G Ethernet, Fiber Channel, SATA/SAS3, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)


For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm CWDM4 module.

  • Distance Specification:Max 10km (OS2 SMF). Dirty end faces, excessive splicing and sharp bending reduce actual transmission distance.

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.

  • Mode Setting: Configure 40G port speed via switch CLI. This LR4 module does not support breakout to 4×10G.
  • Operating Environment: 0°C–70°C commercial temperature range. Ensure cabinet ventilation to avoid optical power attenuation from overheating.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices 

1. Supported Hardware & Firmware

Pre-configured D-Link specific EEPROM coding enables seamless plug-and-play operation and prevents transceiver warning alarms. All modules pass real-machine burn-in and temperature cycling testing for D-Link switch firmware.
Validated Platforms:
  • D-Link DXS-3610, DXS-3130 series data center core switches
  • D-Link DGS-3630 series enterprise layer3 managed switches
  • All D-Link network hardware equipped with native 40GBASE-LR4 QSFP+ ports

2. Multi-Brand Cross Compatibility

Designed to open MSA mechanical and electrical specifications, this 40GBASE-LR4 transceiver supports multi-vendor interoperability. It works stably with Arista, Cisco, Juniper, NVIDIA, Palo Alto, H3C and other mainstream brands for hybrid data center fabric and cross-site network upgrade projects.

3. Free Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility
  • Sample testing available before bulk orders for project validation
  • Private label customization and professional deployment guides
  • Rigorous batch quality consistency control
  • Custom EEPROM configuration for special and legacy network setups
  • Free EEPROM recoding with 24/7 technical support


Primary Application Scenarios

  • Enterprise inter-building 40G backbone: Stable 10km single-mode fiber links connecting separate office buildings.
  • Data center core uplink: 40G fiber interconnection between core switches and leaf switches within leaf-spine architecture.
  • Metropolitan network access: Long-distance 40G fiber links for ISP and enterprise campus networking.
  • D-Link network hardware upgrade: Direct drop-in replacement for aging DEM-QX10Q-LR4 optical transceivers.
  • Multi-vendor network mass rollout: Large-scale deployment for system integrators and wholesale infrastructure projects.

Connectivity Solutions(Applications) 

1.40GbE Switch-to-Switch Connectivity
hytoptodevice 40g qsfp+ lr4 transceiver module for switch to switch

2.40GbE Structured Cabling Interconnect

HYTOPTODEVICE compatible QSFP-40G-LR4 QSFP+ 40G LR4 optical transceiver for bulk data center projects

3.40GbE Switch-to-NIC Interconnection

40GBASE-LR4 QSFP+ 40G LR4 transceiver 1310nm CWDM4 duplex LC single mode fiber for switch

4.Leaf-Spine Architecture

leaf-spine architecture for 40g qsfp+ LR4 10KM TRANSCEIVER MODULE



The Core Feature

1. 40G QSFP+ Connectivity for High-Density Data Centers

Speed without the overhead. The QSFP+ 40G 10KM transceiver delivers full 40G throughput into dense data center racks — drawing less power and occupying less space than you'd expect. High speed, high density, without the trade-offs.

HYTOPTODEVICE 40GBASE-LR4 replacement transceiver for enterprise buyer, reseller stock replenishment


2.
100% Compatibility Verified. Zero-Risk Deployment.

Deploy with total confidence — every 40G QSFP+ LR4 module is rigorously compatibility-tested in the target switch environment before it ships, so your link-up is clean on the first try. No surprises. No downtime. Not sure it fits your switch? Watch our Compatibility Video.

HYTOPTODEVICE 100% COMPATIBLE 40G LR4 single mode optic

3.No Sampling. No Shortcuts. Every Unit Tested

While others rely on batch sampling, we test every single unit. Each QSFP+ LR4 transceiver is individually verified for optical compliance and continuous operational stability before it ships — so performance isn't a gamble, it's a guarantee. See the process yourself: take a virtual tour of our Test Center.

HYTOPTODEVICE 40G LR4 QSFP+ module comprehensive factory testing stable performance for various platforms bulk wholesale orders


FAQ 

Q1: Can HYTOPTODEVICE QSFP+ 40G LR4 optic work with D-Link and other mainstream switch brands including Cisco, Arista, Juniper and Huawei?
A: Yes, if the module carries the correct EEPROM coding customized for your target switch brand. Please send us your exact switch model and firmware version, and our technical team will verify interoperability fully before shipment to avoid unexpected transceiver warnings.
Q2: Can this D-Link compatible QSFP+ 40G LR4 transceiver run inside a QSFP28 100G switch port?
A: In most cases it works when the QSFP28 port supports 40G speed negotiation. This compatibility differs by hardware platform, so you should confirm port speed capability with your switch vendor before placing purchase orders.
Q3: Is it possible to pair this QSFP+ 40G LR4 module with IR4 or ER4 optical modules at the opposite fiber end?
A: LR4 can interoperate with IR4, but the maximum link length will be limited to 2 km determined by the shorter reach IR4 module. It can also connect to ER4 optics only when total fiber loss and link distance fit within ER4 optical power budget. Always validate specs at both ends before mixing different transceiver models.
Q4: What maximum fiber transmission distance can network engineers achieve with HYTOPTODEVICE QSFP+ 40G LR4 optical transceiver?
A: It delivers up to 10 km stable transmission over standard OS2 single-mode fiber following 40GBASE-LR4 specifications. If your required link length is only 2 km, IR4 modules offer a more economical option. For 40km long-distance transmission, ER4 transceivers will be required instead.
Q5: What laser wavelength channels are integrated inside this D-Link compatible QSFP+ 40G LR4 transceiver?
A: It contains four independent CWDM signal lanes at 1271 nm, 1291 nm, 1311 nm, and 1331 nm. Each lane transmits a 10 Gbps data stream, and these four channels combine to deliver total 40 Gbps bandwidth for your fiber link.
Q6: Can network installers split this HYTOPTODEVICE QSFP+ 40G LR4 transceiver into four separate 10G network links?
A: It cannot achieve passive breakout. Each lane uses a unique wavelength on the same duplex fiber pair, so breakout deployment needs external CWDM mux/demux hardware. Unlike SR4 transceivers, LR4 cannot directly fan out to multiple 10G ports without extra optical equipment.
Q7: What fiber connector type is equipped on this QSFP+ 40G LR4 compatible transceiver?
A: This optical transceiver adopts duplex LC connectors for two single-mode fibers and does not use MPO connectors. The simple LC design greatly simplifies on-site fiber termination and cabling work compared with SR4 modules requiring MPO trunk cables.
Q8: What should network technicians know about fiber polarity when deploying duplex LC QSFP+ 40G LR4 transceivers?
A: Duplex LC cables use simple A-to-B keying, so polarity issues rarely happen in normal deployments. The most common mistake is swapping TX and RX fiber cores on one end of the fiber link. Always check fiber orientation carefully during installation to prevent link dropouts.
Q9: Which fiber polishing finish should be selected to match HYTOPTODEVICE 40G LR4 transceiver, UPC or APC?
A: LR4 optical modules follow industry standards and use UPC polish by default. All connected patch cables and patch panels must also use UPC end finish. Mixing UPC and APC connectors will create strong light reflection and extra optical loss, which may break the fiber link.
Q10: Is this D-Link DEM-QX10Q-LR4 replacement transceiver genuine OEM optic or MSA-standard compatible module?
A: OEM branded transceivers carry the original vendor logo with a much higher price tag. Our compatible LR4 modules are built fully to MSA standards and provide identical core functionality. They typically cost 60–80% less than OEM alternatives and are covered under HYTOPTODEVICE’s dedicated product warranty.
Q11: What quality testing workflow does HYTOPTODEVICE perform on every QSFP+ 40G LR4 transceiver before delivery?
A: Every single module undergoes 100% full performance testing. We validate TX output power and RX sensitivity across all four CWDM lanes, plus cross-brand interoperability testing on mainstream switch hardware. Test reports can be supplied upon client request for project documentation.
Q12: Does QSFP+ 40G LR4 transceiver suffer obvious performance degradation after long continuous runtime inside enterprise racks?
A: Slow, gradual aging on individual lanes is normal and can be tracked continuously via DDM monitoring. Sudden performance drops or module failures are rarely caused by natural aging; they are usually triggered by fiber end contamination, excessive cabinet temperature or ESD damage during handling.
Q13: Why is HYTOPTODEVICE’s QSFP+ 40G LR4 transceiver cheaper than official D-Link OEM optical transceivers?
A: We supply directly from factory without OEM brand licensing fee or multi-layer channel markup. The optical performance for standard 40G links remains fully equivalent. When purchasing OEM products, buyers mainly pay for brand license rather than the core optical hardware.
Q14: What lead time can bulk purchasers expect, and do you maintain ready stock for these QSFP+ 40G LR4 modules?
A: Our standard popular QSFP+ 40G LR4 models are kept in stock with fast 24–72 hour dispatch. Custom coded and industrial-grade variants require 5–8 working days of production lead time for bulk orders.
Q15: Does HYTOPTODEVICE provide sample testing support and discounted samples for pre-project compatibility validation?
A: HYTOPTODEVICE fully supports customer sample testing and makes every effort to satisfy pre-project verification demands with competitive sample pricing. All sample fees can be deducted from your first bulk order, making it a perfect way to validate compatibility before large-scale network deployment.

Packaging & Custom OEM Solutions

Every 40G QSFP+ LR4 module leaves our warehouse in sealed ESD-safe packaging, dispatched the same day your order is confirmed. For bulk orders, we tailor the full OEM package — logo printing and private labeling — built for network wholesaler,distributors, integrators, and enterprise deployments.
hytoptodevice cost‑effective 40G QSFP+ LR4 optical module with custom package


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • source third-party compatible QSFP-40G-LR4 replacement module from hytoptodevice
  • 40GBASE-LR4 10km duplex LC SMF transceiver from hytoptodevice
  • hytoptodevice compatible 40GBASE-LR4 10km duplex LC SMF transceiver module
  • Custom CWDM4 QSFP+ 40G LR4 optical module manufacturer for data center project procurement

Download