| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-25G-iER-S | |
| 2 | Cisco | SFP-25G-iER-S-I | |
| 3 | Arista Networks | SFP-25G-ER-Lite | |
| 4 | Arista Networks | SFP-25G-ER-Lite-I | |
| 5 | Brocade | 25G-SFP28-ER-Lite | |
| 6 | Brocade | 25G-SFP28-ER-Lite-I | |
| 7 | NVIDIA(Mellanox) | SFP28-25GER-31 |
| Cisco Compatible | SFP-25G-iER-S-I | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP28 | Max Data Rate | 25Gbps |
| Wavelength | 1310nm | Max Distance | 30km |
| Connector | Duplex LC | Transmitter Type | DML 1310nm |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | 0~+6dBm | Receiver Sensitivity | < -19dBm |
| Max. Power Consumption | ≤2.2W | Receiver Overload | -4dBm |
| Protocols | MSA Compliant, CPRI, eCPRI | Operation Temperature | -40 to 85°C (-40 to 185°F) |
Usage Guidelines & Best Practices
Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.
Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade 25GBASE-ER 30KM module performance.
Distance & Link Budget: Supports up to a 30 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.
Port Compatibility Check: This optic only works on native 25G SFP28 ports. It can physically insert into SFP+ slots but will not negotiate 25G speed. Confirm your hardware or multi-vendor switch supports 25GBASE-LR standard before plugging in
Optical Attenuator Required for Short Links: For testing or short‑distance connections (<20km), connect a 10dB–15dB optical attenuator to the RX port to prevent damaging the receiver.(20KM<Distance<30km,connect 5‑10dB optical attenuator)
Industrial Temperature Handling: This industrial-grade module supports -40℃ ~ +85℃ wide-temperature operation. Ensure the cabinet ventilation and heat dissipation are maintained in field deployments; avoid direct exposure to sunlight, moisture, dust or corrosive gas to extend service life.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1.Validated Cisco Hardware & Firmware
This industrial 25G SFP28 ER Lite 30km optical transceiver adopts Cisco customized EEPROM coding, ensuring trouble-free plug-and-play identification and eliminating third-party optic alert messages under Cisco IOS / NX-OS firmware. Every finished unit undergoes strict burn-in and multi-temperature stability testing before shipment to guarantee full compatibility with Cisco industrial platforms:
2.Multi‑Brand Cross Interoperability
Built with open MSA specifications, this rugged optic supports error-free signal transmission and complete CLI identification across Arista, Brocade, NVIDIA Mellanox, Juniper and other mainstream network hardware, offering system integrators flexible multi-vendor deployment options.
3.Free Value-Added Services
Custom EEPROM programming for multi-platform compatibility
Pre-bulk sample testing for project validation
Private label customization and deployment guides
Strict batch quality control
EEPROM configuration for legacy network environments
Free EEPROM recoding plus 24/7 technical support
Primary Application Scenarios
• Industrial Metro Fiber Backbone: Designed for 30km long-span single-mode fiber interconnections for industrial and metropolitan carrier network nodes.
• 5G Radio Fronthaul & Midhaul: Provides high-density, low-latency 25G optical links to carry CPRI/eCPRI traffic for outdoor 5G base station infrastructure.
• Industrial Data Center Inter-Switch Uplink: Ideal for long-distance rack uplink, cross-site interconnection and leaf-spine industrial data center architecture.
• Smart Factory & Smart City Optical Infrastructure: Supports fiber trunk upgrades for factory automation, municipal surveillance and campus wide-area industrial networking.
• Telecom Wholesale & OEM Sourcing: Stable bulk supply solution for telecom distributors, value-added resellers and industrial system integration projects.



The Core Features
1. Low Power & High Port Density

2. Host Validated for Reliable Interoperability
Pre-flashed EEPROM matching industrial SFP28 25G ER specs, plug-and-play without transceiver warning messages and cuts down on-site troubleshooting work for industrial deployments. Specific Compatibility Video available upon request.


Q1: Can this module auto-negotiate or manually fall back to 10G SFP+ LR rates? A: NO. This HYTOPTODEVICE 25G SFP28 ER Lite transceiver is fixed at 25G rate and cannot auto-negotiate or drop down to 10G SFP+ LR speed. It is designed for 25GBASE-ER Lite links only and will not establish stable 10G connections.
Q2: Will short patch cables (e.g., test bench testing) burn out the receiver APD photodiode? A: NO. It will not permanently burn hardware. Max Tx power is 0~+6 dBm and receiver overload = -4 dBm. Direct short jumper without attenuator may cause optical saturation, signal distortion and link flap. We recommend using an optical attenuator during bench testing to avoid saturation.
Q3: Is the transmitter eye diagram compliant with IEEE 802.3cc mask requirements with sufficient margin? A: YES. The transmitter eye diagram of this HYTOPTODEVICE industrial 25G SFP28 ER Lite meets IEEE 802.3cc mask requirements with adequate margin. Every unit is inspected during production to guarantee signal integrity for 30km single-mode fiber transmission.
Q4: Is the module built with native I-Temp components or just bin-tested C-Temp silicon? A: YES. This module uses native I-Temp grade optical and electronic components, not merely screened commercial C-Temp chips. Native wide-temperature components deliver stable performance from -40°C to +85°C for harsh industrial environments.
Q5: Can the transceiver power on and establish a link immediately at −40∘C? A: YES. This HYTOPTODEVICE industrial optic can power up and build stable link at -40°C. All optical and electrical sub-assemblies are selected and validated for cold-start operation in extreme low-temperature industrial scenarios.
Q6: How does laser efficiency degrade near the upper thermal limit of +85∘C? A: YES. Laser efficiency slightly drops at +85°C, but our DML laser is calibrated to maintain transmit power within the specified 0~+6dBm window. The optical budget still meets requirements for full 30km transmission at maximum rated temperature.
Q7: How does the module handle rapid ambient temperature swings? A: YES. This industrial SFP28 transceiver tolerates fast temperature fluctuations. The internal optical assembly and sealed housing reduce thermal stress, preventing sudden link dropouts during rapid temperature changes in factory or outdoor sites.
Q8: Has each batch undergone 100% full-temperature cycle burn-in testing prior to shipping? A: YES. Every production batch of HYTOPTODEVICE 25G SFP28 ER Lite modules runs 100% full temperature cycle burn-in test before shipment. The 3-temperature screening filters out early failures for industrial long-term deployments.
Q9: Does live insertion cause high electrical inrush current that triggers host power supply resets? A: NO. Hot-swap protection circuit is integrated. Live insertion will not generate excessive inrush current to trigger host power reset. This design supports safe hot-plugging on Cisco industrial switches without equipment reboot.
Q10: Are the lasers and ROSA components sourced from Tier-1 optical chip manufacturers? A: YES. Lasers and ROSA sub-assemblies for this HYTOPTODEVICE industrial transceiver are sourced from tier-one optical chip vendors. Premium components ensure consistent optical performance and long service life in industrial networks.
Q11: Is there a guaranteed supply chain pipeline for long-term project deployments? A: YES. HYTOPTODEVICE maintains stable raw material stock and controlled production pipeline. We can support long-term industrial project rollouts with consistent lead time and reserved capacity for bulk buyers and system integrators.
Q12: Does the supplier provide advance replacement options for defective units in remote areas? A: YES. HYTOPTODEVICE offers advance replacement service for confirmed faulty modules for qualified bulk buyers. This service helps remote industrial sites minimize network downtime and simplifies after-sales support for integrators.
Q13: How can buyers verify that optics are genuine industrial-grade rather than relabeled commercial stock? A: YES. Buyers can verify by reviewing our full temperature test reports and DOM log data. Each unit has unique serial number tied to 3-temperature test records, proving genuine I-temp hardware instead of relabeled commercial modules.
Q14: Why does the unit cost vary significantly between low-tier vendors and tier-1 optics suppliers? A: YES. The price gap mainly comes from component grade, temperature screening and burn-in test. Low-cost vendors use commercial grade chips without full thermal cycling. HYTOPTODEVICE uses native I-Temp parts and full batch burn-in for industrial reliability.
Q15: Is the bail latch designed to withstand multiple insertion/extraction cycles in dense panel layouts? A: YES. The bail latch of this SFP28 module is reinforced for repeated plug and pull. It maintains mechanical integrity for many insertion cycles, ideal for dense switch panel deployment in industrial and data center racks.
Q16: What is the shelf life and storage temperature range for spare inventory? A: YES. The shelf life of this industrial transceiver is 5 years under proper storage. Recommended storage temperature is -40°C ~ +85°C, with low humidity control to protect optical and electronic components for spare stock management.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






