| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-4SFP10G-CU50CM | |
| 2 | Arista Networks | CAB-Q-S-0.5M | |
| 3 | Juniper | QFX-QSFP-DACBO-50CM | |
| 4 | Brocade | 40G-QSFP-4SFP-C-0105 | |
| 5 | Dell | 332-1365 | |
| 6 | Intel | X4DACBL50 | |
| 7 | NVIDIA/Mellanox | MC2609130-050 | |
| 8 | IBM | BN-QS-SP-CBL-50CM |
| Cisco Compatible |
QSFP-4SFP10G-CU50CM
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP+ to 4 x SFP+ | Max Data Rate | 40Gbps |
| Cable Length | 0.5m (1.6ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | SFF-8436, SFF-8431 and QSFP+ MSA |
| Minimum Bend Radius | 21mm | Application | 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel |
Usage Guidelines & Best Practices
Mandatory Port Breakout Configuration: Ensure the host QSFP+ port supports channelization. Enable breakout mode (4x10G) via the switch CLI before connecting the cable.
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Do not mix this breakout DAC with straight QSFP+ to QSFP+ DAC configuration.
Hot‑swap rule:Never pull or tug directly on the individual breakout legs. Always use the integrated pull-tab or bale latch when inserting or removing connectors.
Operating Environment: 0‑70℃, indoor cabinet deployment only.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 40G QSFP+ to 4 x 10G SFP+ passive breakout DAC cable can interoperate with mainstream network brands including Arista, Intel, Juniper, Dell, NVIDIA Mellanox and IBM, for mixed-vendor rack stacking and server fabric expansion.




Q1: Will this Cisco breakout DAC create four independent 10G links on a Cisco Nexus QSFP+ port? A: Yes, this HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC supports four separate 10G lanes. It is pre-flashed with Cisco EEPROM and validated for NX-OS breakout mode to deliver four isolated 10GBASE-CR connections.
Q2: Why does my Cisco Nexus still show transceiver unsupported warnings after installing this fan-out DAC? A: The alert appears when the switch signature check fails without correct EEPROM data. HYTOPTODEVICE preloads Cisco-specific breakout profiles for this 40G QSFP+ to 4x10G SFP+ breakout DAC to reduce warning logs on NX-OS.
Q3: Are MSA-compliant breakout DACs guaranteed to work on all white-box open switches with breakout ports? A: No. While MSA compliance ensures physical and electrical fit, compatibility is not 100% guaranteed on all white-box open switches. Stable operation depends on two factors: the switch NOS such as SONiC or Cumulus must support channelization and be manually configured via CLI into 4×10G mode, and the OS must properly parse the cable’s SFF-8436 EEPROM map. HYTOPTODEVICE validates our breakout DACs against popular open NOS platforms for smoother deployment.
Q4: What is the key difference between a breakout fan-out DAC and a straight QSFP+ to QSFP+ DAC? A: A straight DAC carries one full 40G end-to-end link; this HYTOPTODEVICE breakout DAC splits one 40G port into four individual 10G SFP+ ports, designed for 40G-to-10G migration in Cisco data center racks.
Q5: Can I run only one or two of the four 10G lanes and leave the remaining SFP+ connectors unconnected? A: Yes, unused branches can stay idle without breaking the other active lanes. This HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC supports partial lane utilization for phased server deployment.
Q6: When should I choose a breakout DAC instead of using four separate 10G SFP+ DAC cables? A: Breakout DAC saves QSFP+ port slots and reduces cable clutter. Our 40G QSFP+ to 4x10G SFP+ breakout DAC is ideal when you have limited 40G uplink ports and many 10G servers to connect.
Q7: What is the maximum reliable reach you can get with passive 40G QSFP+ twinax copper? A: The reliable upper limit for passive 40G QSFP+ twinax is 5–7 meters. This 0.5m HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC is ideal for ultra-short rack internal 40GBASE Ethernet with minimal signal attenuation.
Q8: How do different AWG ratings change signal loss for 40G twinax DAC on Cisco racks? A: Thicker wires (lower AWG numbers like 24AWG) experience lower signal attenuation over longer runs (5m–7m), whereas thinner wires (30AWG) are better suited for short, flexible runs (0.5m–2m). This 30AWG HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC balances flexible routing and steady signal integrity for short 40GBASE Ethernet links.
Q9: Which AWG grade works best for dense cable management with 40G QSFP+ DAC assemblies? A: Yes. 24AWG cables are thick, heavy, and rigid. They require careful bend radius management to prevent putting excessive mechanical strain on switch port cages. 30AWG twinax offers superior flexibility for dense layouts. This HYTOPTODEVICE 0.5-2m breakout DAC uses 30AWG, making routing easier on high-density Cisco patch panels and cable arms.
Q10: Can I route this breakout DAC through cable trays outside the server rack? A: No, passive twinax breakout DAC is built only for indoor cabinet use. It has no outdoor-rated jacket, so this 40G QSFP+ to 4x10G SFP+ breakout DAC must remain inside data racks.
Q11: What cable solution replaces passive breakout DAC if my 10G links need to run longer than 7 meters? A: Breakout AOC is the proper upgrade for longer fan-out links. This HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC delivers zero-power, low-cost connections for short rack-local 40G-to-10G fan-out.
Q12: How does total cost compare between breakout DAC and deploying four individual 10G SFP+ DAC cables? A: Breakout DAC cuts hardware and cable management costs by consolidating four 10G links into one QSFP+ port. This HYTOPTODEVICE breakout DAC reduces investment for Cisco 40G leaf to 10G server deployments.
Q13: Will adjacent power cables trigger EMI and cause lane flapping on this 4-lane breakout DAC? A: Shielded twinax suppresses EMI but each 10G lane is sensitive to noise. HYTOPTODEVICE applies full shielding on this 40G QSFP+ to 4x10G SFP+ breakout DAC to keep all four lanes stable near rack power cabling.
Q14: Can I plug the four SFP+ tails of this breakout DAC into 25G SFP28 ports? A: Yes, in most cases, but the connection will operate at 10G speeds, not 25G. SFP28 ports (25G) are backwards compatible with standard SFP+ connectors and 10G signals. When you plug a 10G SFP+ tail into an SFP28 port, the host switch/NIC will automatically run that interface at 10Gbps.
Q15: Can this Cisco compatible breakout DAC connect a Cisco Nexus 40G port to four Dell 10G SFP+ server NICs? A: No, a standard single-brand Cisco-compatible breakout DAC will not link up out of the box. The QSFP+ end carries Cisco EEPROM and works fine on Cisco Nexus, but Dell NICs enforce vendor lock-in and require Dell-coded EEPROM on SFP+ ends. You will see unsupported transceiver alerts and link blockage. HYTOPTODEVICE can supply split-coded versions with Cisco coding on the QSFP+ port and Dell coding for all four SFP+ tails to support this topology.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




