• HYTOPTODEVICE compatible 40G QSFP+ SR4 transceiver 850nm 150m MPO MMF
  • HYTOPTODEVICE 40GBASE‑SR4 VCSEL QSFP+ module MPO‑12 connector for  data‑center multi‑mode transmission
  • HYTOPTODEVICE zero‑alarm plug‑and‑play  qsfp+ sr4  replacement 40G SR4 optical transceiver
  • HYTOPTODEVICE zero‑alarm plug‑and‑play   qsfp+ 40g  replacement 40G SR4 optical module
  • HYTOPTODEVICE compatible 40G QSFP+ SR4 transceiver 850nm 150m MPO MMF
  • HYTOPTODEVICE 40GBASE‑SR4 VCSEL QSFP+ module MPO‑12 connector for  data‑center multi‑mode transmission
  • HYTOPTODEVICE zero‑alarm plug‑and‑play  qsfp+ sr4  replacement 40G SR4 optical transceiver
  • HYTOPTODEVICE zero‑alarm plug‑and‑play   qsfp+ 40g  replacement 40G SR4 optical module

Cisco QSFP-40G-CSR4 Compatible QSFP+ 40G SR4 Transceiver Module | 40GBASE‑CSR4 850nm 400m MPO Support 4x10G Breakout Connectivity Bulk Wholesale

Factory direct Cisco QSFP-40G-CSR4 compatible QSFP+ 40G SR4 transceiver, 40GBASE-CSR4 850nm, 300m OM3/400m OM4 MMF with MPO connector. Support 4x10G breakout connectivity, pre-flashed EEPROM for Cisco switches, fix QSFP+ 40G SR4 link flapping & unsupported errors. Bulk wholesale & custom EEPROM service for data center upgrades.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QSFP-40G-CSR4
2 Alcatel-Lucent  QSFP-4X10G-SR 
3 Arista  QSFP-40G-XSR4
4 Dell 0MV31 
5 H3C  QSFP-40G-CSR4-MM850
6 HPE Aruba  JH233A
7 HPE H3C  JG709A
8 Huawei  QSFP-40G-eSR4 
9 Juniper  QFX-QSFP-40G-ESR4
10 NVIDIA(Mellanox)  MC2210411-SR4E



Description

Cisco QSFP-40G-CSR4 Compatible QSFP+ 40G SR4 Transceiver Module | 40GBASE‑CSR4 850nm 400m MPO Support 4x10G Breakout Connectivity Bulk Wholesale

Product Overview

HYTOPTODEVICE 40G QSFP+ SR4 serves as drop-in replacement for Juniper QSFPP-40GBASE-SR4. It complies with 40GBASE-SR4 standard at 850nm wavelength, reaching 100m over OM3 and 150m over OM4 multimode fiber with MPO-12 connector. Pre-programmed EEPROM supports alarm-free hot swap and DOM monitoring. Suitable for data center leaf-spine and rack-to-rack 40G short-reach links. As the manufacturer, HYTOPTODEVICE provides bulk wholesale, custom EEPROM and private label services for system integrators, distributors, wholesaler and enterprise buyers.

Key Technical Specifications 

Cisco Compatible QSFP-40G-CSR4 Vendor Name HYTOPTODEVICE
Form Factor QSFP+ Max Data Rate 42Gbps (4x 10.5Gbps)
Wavelength 850nm Max Distance 300m@OM4/400m@OM3
Connector MTP/MPO Transmitter Type VCSEL 850nm
Cable Type MMF Receiver Type PIN
TX Power -8.0~2.0dBm Receiver Sensitivity < -13dBm
Power Consumption ≤1.5W Modulation NRZ
Protocols 40G Ethernet, SATA/SAS3, IEEE 802.3ba, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)


For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Choice: Only compatible with OM3 / OM4 multi‑mode MPO‑12 trunk cabling; single‑mode fiber cannot facilitate 850 nm SR4 operation and will produce link failure.

  • Distance Limit: 100‑metre maximum operating reach on OM3, 150‑metre maximum on OM4; excessive splice joints, dirty connector end‑faces or sharp fiber bends degrade practical transmission distances.

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Installation Specification: Hot‑plug supported; keep MPO connector end‑faces clean, observe minimum fiber‑bend radius requirements.

  • Port Configuration: Confirm host ports are set to 40G SR4 mode; do not mix SR4 with other 40G optical standards on the same link.
  • Operating Environment: Designed for commercial‑grade 0°C‑70°C ambient conditions; maintain adequate cabinet‑level airflow to prevent excessive module temperature build‑up.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices 

1. Supported Hardware & Firmware

Pre-configured Juniper optimized EEPROM delivers stable plug-and-play performance for Juniper switching and routing platforms. Each transceiver goes through real machine verification to prevent link instability and unsupported transceiver warnings.
Validated Juniper Platforms:
• QFX5100, QFX5120, QFX10000 series data center switches
• EX4600, EX9200 series enterprise core switches
• MX10003, MX10008, MX204 universal routing platforms
• All Juniper hardware fitted with native QSFP+ 40GBASE-SR4 ports

2. Multi-Brand Cross Compatibility

Built to open MSA mechanical and electrical standards, these compatible 40G QSFP+ SR4 transceivers support multi-vendor interoperation. They run steadily on Arista, Cisco, HPE H3C, Dell and other mainstream network gear, enabling mixed-brand fabric architecture and phased data center upgrade projects.

3. Free Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility
  • Sample testing available before bulk orders for project validation
  • Private label customization and professional deployment guides
  • Rigorous batch quality consistency control
  • Custom EEPROM configuration for special and legacy network setups
  • Free EEPROM recoding with 24/7 technical support

Primary Application Scenarios

  • Short-distance leaf-spine fabric interconnection for Juniper data center network architecture
  • 40G high-bandwidth trunk expansion for large enterprise and IDC core aggregation layer networks
  • Top-of-Rack 40G high-speed uplinks connecting Juniper switches to virtualization and server compute clusters
  • Short-range rack-to-rack multi-mode fiber interconnection inside server rooms and data center cabinets
  • Legacy Juniper network infrastructure renovation, bandwidth upgrade and modernization projects
  • Multi-vendor hybrid fabric deployment for cloud computing and virtualized workload scenarios

Connectivity Solutions(Applications) 

1.40GbE Switch-to-Switch Connectivity
HYTOPTODEVICE 40G‑to‑40G switch‑to‑switch interconnection short‑reach SR4  module for core trunk links

2.40GbE Structured Cabling Interconnect

HYTOPTODEVICE 40G high‑speed stacking module for  enterprise campus network upgrade

3.40GbE Switch-to-NIC Interconnection

HYTOPTODEVICE 40G switch‑to‑server NIC high‑speed uplink module for server cluster connections

4.Leaf-Spine Architecture
HYTOPTODEVICE 40G SR4 multi‑mode module for leaf‑spine data‑center deployment



The Core Feature

1. 40G Connectivity for Data Center

High speed, low overhead. The QSFP+ 40G module brings gigabit-class throughput to dense data center racks while drawing less power and taking up less space.


HYTOPTODEVICE 40G SR4 QSFP+ module helps reduce CAPEX for data‑center upgrade projects


2.
100% Compatibility-Tested for Reliable Deployment

Deploy with confidence: every 40G QSFP+ module is rigorously tested for compatibility in the target switch environment — no surprises, no downtime. Not sure it fits? Get our Compatibility Video on request.


HYTOPTODEVICE QSFP‑40G‑SR4 compatible transceiver with verified multi‑generation switch interoperability

3. 100% Individually Tested for Peak Performance

Every unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE 40G SR4 QSFP+ module comprehensive factory testing stable performance for various platforms bulk wholesale orders


FAQ 

Q1: What if my switch shows "unsupported transceiver" after installation?

A: This transceiver warning can be fully eliminated via professional EEPROM recoding. The error is triggered by mismatched vendor coding between the module and Juniper switch lock mechanism. HYTOPTODEVICE preflashes precise platform-specific codes for Juniper QSFPP-40GBASE-SR4 modules to ensure alarm-free recognition; persistent issues are fixable via port configuration adjustment, firmware update or our free recoding service.

Q2: Can I mix a third-party module at one end and an OEM module at the other for my 40G SR4 fiber link?

A: Mixed OEM and third-party module deployment is fully supported for 40G SR4 links. 40GBASE-SR4 is a universal MSA-standardized physical layer specification with unified transmission parameters. HYTOPTODEVICE certified 40G QSFP+ SR4 modules achieve stable interoperation with original OEM modules as long as both ends adopt OM3/OM4 multimode fiber and standard MPO cabling.

Q3: Does the module support the switch's DDM/DOM alarm thresholds for real-time optical monitoring?

A: This module fully supports standard DDM/DOM real-time monitoring and threshold identification. It complies with SFF-8436 DOM protocol to accurately read module temperature, operating voltage, TX/RX optical power and factory alarm thresholds. All HYTOPTODEVICE 40G SR4 transceivers retain complete digital monitoring functions for real-time link status diagnosis.

Q4: What are the insertion loss and link budget requirements for 40GBASE-SR4 cabling?

A: The 40G SR4 link requires total insertion loss controlled within 1.9 dB for stable operation. The official IEEE 40GBASE-SR4 standard defines a maximum 1.9 dB channel loss including connectors, splices and patch panels. Always test on-site cable plant loss before deploying HYTOPTODEVICE modules to avoid packet loss and link dropping.

Q5: Is the QSFP+ 40G SR4 transceiver hot-swappable during live network operation?

A: This QSFP+ transceiver supports safe hot-swap operation without powering down devices. It strictly follows QSFP+ MSA hot-plug electrical and mechanical design specifications. HYTOPTODEVICE modules feature built-in ESD protection, allowing convenient online replacement and maintenance for live Juniper network environments.

Q6: Do I need a breakout cable to connect this 40G SR4 module to existing 10G SFP+ network devices?

A: This specific 40G QSFP+ SR4 module does not support breakout functionality for 10G connection scenarios. Although 40G-to-10G networking requires breakout cables, this standard SR4 model only supports native 40G parallel transmission. To connect 10G SFP+ devices, you must replace it with a dedicated breakout-enabled QSFP+ 40G SR module; HYTOPTODEVICE can provide matched alternative models.

Q7: How important is MPO connector cleanliness for stable 40G SR4 link performance?

A: MPO connector cleanliness is decisive for long-term stable 40G SR4 link transmission. Statistics show contaminated ferrules account for the majority of 40G multimode link failures and may cause irreversible VCSEL laser damage. Always inspect and clean MPO ports before installing HYTOPTODEVICE 40G SR4 modules to guarantee zero-error operation.

Q8: What bend radius should I maintain on multimode fiber for 40G SR4 links?

A: Fiber cables must maintain a standard minimum bend radius during deployment. The universal industry standard requires approximately 10× cable diameter as the minimum bending range. Excessively sharp bends will increase transmission loss and gradually damage fiber cores, affecting the long-term stability of HYTOPTODEVICE 40G SR4 optical links.

Q9: What warranty do you offer for bulk purchased 40G QSFP+ SR4 modules, and how do I claim it?

A: We provide exclusive 5-year official warranty and standardized RMA service for all wholesale customers. All HYTOPTODEVICE bulk 40G QSFP+ SR4 modules undergo strict factory testing and quality screening. Customers can follow our standardized RMA process including problem feedback, product return and official replacement/repair services; detailed warranty rules are published on our official website.

Q10: What is the expected lifespan / MTBF of factory-grade 40GBASE-SR4 optical modules?

A: Industrial-grade structural design ensures ultra-long service life for our 40G SR4 modules. Qualified modules achieve MTBF ratings of several million hours under normal operating conditions. HYTOPTODEVICE adopts premium VCSEL laser arrays and core chips with gradual and stable aging characteristics to support years of continuous operation.

Q11: Will optical performance of the 40G SR4 transceiver degrade over long running time?

A: No obvious performance degradation occurs during long-term normal operation of our modules. Slight laser aging is a physical normal phenomenon and can be tracked in real time via DDM data. HYTOPTODEVICE precise component calibration and aging testing ensure consistent link stability; sudden failures are caused by external factors instead of natural aging.

Q12: What if my 40G SR4 module arrives DOA (dead on arrival) after shipment?

A: HYTOPTODEVICE strictly regards product quality as enterprise core competitiveness and guarantees zero-DOA delivery for qualified orders. We implement a 30-day free replacement and return policy for all standard products. Once DOA situations occur, we provide fast free replacement services to fully protect customers’ normal network deployment and operation.

Q13: How do I install the 40G QSFP+ SR4 module correctly into switch ports?

A: Standard aligned gentle insertion ensures safe and correct module installation. Operate by aligning the module keyway with the port slot, inserting smoothly and locking in place. Forcing misaligned insertion will bend internal gold pins and damage both the module and Juniper switch port; follow standard steps when deploying HYTOPTODEVICE transceivers.

Q14: What cleaning tools do I need to maintain MPO connectors for 40G SR4 links?

A: Professional dedicated fiber tools are required for daily MPO connector maintenance. Standard tool sets include an MPO inspection scope, professional cleaning sticks and one-click fiber cleaners. Thoroughly clean both module ferrules and cable connectors before each connection to eliminate contamination risks for HYTOPTODEVICE 40G SR4 links.

Q15: Do you provide technical documentation and support for 40G SR4 module deployment projects?

A: We provide complete one-stop technical documents and full-cycle technical support for all clients. Support materials include official datasheets, compatibility lists and quick installation guides. HYTOPTODEVICE professional technical team provides pre-sales selection guidance and after-sales deployment troubleshooting to support bulk project implementation.


Packaging & Custom OEM Solutions

Every 40G QSFP+ SR4 module ships in sealed ESD-safe packaging, ready for same-day dispatch. Bulk orders offer OEM customization—logo printing and private labeling—tailored for network distributors, integrators, and enterprise deployments.

cost‑effective 40G short‑reach optical module with custom package


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • HYTOPTODEVICE compatible 40G QSFP+ SR4 transceiver 850nm 150m MPO MMF
  • HYTOPTODEVICE 40GBASE‑SR4 VCSEL QSFP+ module MPO‑12 connector for  data‑center multi‑mode transmission
  • HYTOPTODEVICE zero‑alarm plug‑and‑play  qsfp+ sr4  replacement 40G SR4 optical transceiver
  • HYTOPTODEVICE zero‑alarm plug‑and‑play   qsfp+ 40g  replacement 40G SR4 optical module

Download