| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QDD-400-CU3M | |
| 2 | Arista Networks | CAB-D-D-400G-3M | |
| 3 | Dell | DAC-Q56DD-400G-3M | |
| 4 | Juniper | QDD-400G-DAC-3M | |
| 5 | NVIDIA/Mellanox | MCP1660-W003E26 |
| Cisco Compatible |
QDD-400-CU3M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP-DD to QSFP-DD | Max Data Rate | 400Gbps |
| Cable Length | 3m (10ft) | Wire AWG | AWG 27 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3cd, QSFP-DD MSA, CMIS 4.0 |
| Minimum Bend Radius | 35mm | Application | 400G Ethernet and InfiniBand EDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP-DD port must enable 400GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.sharp bends degrade 400G PAM4 signals and trigger link errors.
Port Installation Standard: Works only with standard QSFP-DD 400G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 400G QSFP-DD passive cable can interoperate with mainstream network brands including Arista, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion..







Q1: Can this Cisco coded 3m 400G QSFP-DD passive cable work smoothly when connecting Cisco hardware to other vendor switches? A1: Compatibility depends on EEPROM programming. As a professional 400g passive cable supplier, HYTOPTODEVICE provides single or dual-vendor coding options. With matched coding, it works seamlessly on most MSA-compliant QSFP-DD platforms.
Q2: Is a QSFP-DD cable backward compatible with older QSFP28 (100G) or QSFP56 (200G) ports? A2: Physically, QSFP-DD ports are designed to accept older QSFP28 or QSFP56 modules with some physical and software limitations. However, this 400G QSFP-DD DAC cannot operate when inserted into legacy 100G/200G ports because of mismatched form factor and electrical lane definition.
Q3: Does using this third-party Cisco compatible 400G passive cable void the original Cisco hardware warranty? A3: It will not automatically void your Cisco switch or NIC warranty. Our HYTOPTODEVICE passive DAC cable complies with MSA and IEEE 802.3ck standards. Hardware vendors only deny warranty claims when cable defects directly cause permanent port damage.
Q4: Can I connect different brands of network interface cards (NICs) on each end of the cable? A4: Yes, provided each end is correctly coded or compatible with the respective hardware requirements of the connected servers or switches. HYTOPTODEVICE offers dual-sided custom EEPROM coding service to support mixed-brand NIC interconnection for bulk deployments.
Q5: Will this 3m Cisco compatible 400G QSFP-DD passive cable support auto-negotiation on Cisco switch ports? A5: Yes. This HYTOPTODEVICE passive DAC cable supports IEEE auto-negotiation. The negotiation function is managed by the switch or NIC firmware instead of the passive copper cable itself.
Q6: What is the maximum supported length for passive 400G copper twinax cables we supply? A6: Our maximum supported length for passive 400G QSFP-DD copper twinax is 3 meters. HYTOPTODEVICE supplies 0.5m, 1m, 2m and 3m variants; passive copper cannot preserve 400G PAM4 signal integrity beyond 3m.
Q7: What latency differences can I expect between this 400G passive twinax cable and fiber optic links for Cisco fabric? A7: 400G copper DAC delivers lower latency than fiber links. Electrical signals travel faster in copper than light through glass fiber, and DAC removes extra transceiver chip latency. Our product from this 400g passive cable supplier fits latency-sensitive AI and switching workloads.
Q8: What wire gauge (AWG) is typically used in 400G QSFP-DD cables? A8: Short lengths including 0.5m and 1m use 30AWG for better flexibility. 2m and 3m versions adopt 28AWG to minimize signal attenuation. HYTOPTODEVICE matches the proper AWG for every length to stabilize 400G PAM4 signal transmission.
Q9: Can this 3m Cisco 400G QSFP-DD passive cable sustain continuous full line-rate traffic in a busy data center? A9: Yes, within rated length and proper operating environment. Every HYTOPTODEVICE passive DAC cable passes line-rate burn-in testing, supporting sustained 400G line-rate traffic with zero packet loss.
Q10: Can this Cisco compatible 400G passive cable be reprogrammed to support InfiniBand NDR besides Ethernet? A10: It relies on EEPROM setup and host configuration. HYTOPTODEVICE can program this 400G QSFP-DD DAC for Ethernet or InfiniBand NDR; kindly specify your transmission mode when placing bulk orders.
Q11: What kind of pull-tab latch comes on the QSFP-DD connectors of this 3m Cisco passive cable? A11: It uses standard bail-clasp pull-tab latches. This mainstream design from HYTOPTODEVICE enables easy, tool-free plugging and unplugging without scratching or damaging switch ports.
Q12: Am I able to use this 3m passive 400G cable for cross-rack connections between separate cabinets? A12: Not recommended for regular cross-rack deployment. Our passive 400G twinax max reach is 3m, only suitable for adjacent racks. Longer cross-rack connections need 400G AOC fiber cables.
Q13: Can I get custom colored cable jackets for bulk orders placed with this 400g passive cable supplier? A13: Standard jacket color is black. HYTOPTODEVICE supports custom jacket colors for bulk OEM orders, you can submit color requirements alongside EEPROM coding requests before production.
Q14: What should I check first if this 3m Cisco QSFP-DD passive cable fails to bring up link on Nexus switches? A14: The link will stay down and IOS-XE may log link failure alerts. Check connector seating, confirm EEPROM coding matches your Cisco hardware, and inspect for over-bending. HYTOPTODEVICE technical team can assist with link debugging.
Q15: Why choose passive 400G twinax cables instead of fiber for short intra-rack Cisco deployments? A15: Passive DAC contains no laser chips, photodiodes or optical components. As a trusted 400g passive cable supplier, HYTOPTODEVICE builds these cables with copper and shielding materials, cutting hardware cost compared to optical modules.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




