| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QDD-400-CU0.5M | |
| 2 | Arista Networks | CAB-D-D-400G-0.5 | |
| 3 | Dell | DAC-Q56DD-400G-0.5M | |
| 4 | NVIDIA/Mellanox | MCP1660-W00AE30 | |
| 5 | H3C | QSFPDD-400G-D-CAB-0.5M | |
| 6 | Generic | QSFPDD-400G-CUxM |
| Cisco Compatible |
QDD-400-CU0.5M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP-DD to QSFP-DD | Max Data Rate | 400Gbps |
| Cable Length | 0.5m (1.67ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3cd, QSFP-DD MSA, CMIS 4.0 |
| Minimum Bend Radius | 35mm | Application | 400G Ethernet and InfiniBand EDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP-DD port must enable 400GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.sharp bends degrade 400G PAM4 signals and trigger link errors.
Port Installation Standard: Works only with standard QSFP-DD 400G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 400G QSFP-DD passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.







Q1: Will this Cisco compatible 400G passive copper twinax cable work on Nexus QSFP-DD switches? A1: Yes. This HYTOPTODEVICE cable is pre-coded to match Cisco QDD-400-CU0.5M, validated for Cisco Nexus QSFP-DD platforms. It establishes stable 400G PAM4 links out of the box with compatible NX-OS firmware.
Q2: Will deploying third-party 400G DAC cables void my Cisco network hardware warranty? A2: It will not automatically void your switch warranty. This HYTOPTODEVICE passive copper twinax cable follows MSA and IEEE 802.3ck specs. Cisco only denies warranty when cable defects directly cause permanent port damage.
Q3: Are these QSFP-DD twinax cables compliant with official industry standards? A3: Yes. Our HYTOPTODEVICE cable meets IEEE 802.3ck and SFF-8636 MSA standards. Every unit is tested for 400G signal integrity metrics before shipment.
Q4: What modulation technology does this 400G QSFP-DD passive copper twinax cable use? A4: It adopts PAM4 modulation. Each lane runs at 50Gbps PAM4, 8 lanes combine to deliver 400Gbps, which is the standard modulation scheme for QSFP-DD 400G passive copper twinax interconnects from HYTOPTODEVICE.
Q5: Is FEC required for stable 400G links over this short passive copper twinax cable? A5: FEC is not mandatory for this 0.5m ultra-short link. HYTOPTODEVICE’s cable retains ample signal margin for 400G PAM4 transmission; FEC can be enabled optionally for extra signal margin.
Q6: What latching mechanism is fitted on these QSFP-DD connectors? A6: They use standard bail-clasp pull-tab latches. This mainstream design for QSFP-DD connectors on HYTOPTODEVICE twinax cables supports easy, tool-free plugging and unplugging.
Q7: Can I use this 0.5m 400G passive copper twinax cable for cross-rack cabling? A7: Not recommended. Passive copper twinax has strict distance limits for 400G PAM4 signals. It is designed for ultra-short intra-rack jumpers; cross-rack 400G connections need AOC fiber cables.
Q8: Are these Cisco compatible 400G passive copper twinax cables hot-swappable? A8: Yes, they support hot swap. This HYTOPTODEVICE cable follows QSFP-DD hot-swap specifications. You can plug or unplug the cable while the switch powers on without harming ports.
Q9: What warranty coverage is provided for this 400G QSFP-DD DAC twinax cable? A9: HYTOPTODEVICE provides a 5-year warranty for this 400G passive copper twinax cable. The warranty covers manufacturing defects that impact link performance, connectors and shielding.
Q10: Can I request custom lengths or custom pin configurations for 400G fabric deployment? A10: Custom lengths are available for bulk orders. Custom pinouts require technical review first. HYTOPTODEVICE engineering team can provide OEM tailored cable solutions for system integrators.
Q11: Do these 400G QSFP-DD copper twinax cables satisfy global environmental compliance rules? A11: Yes. All HYTOPTODEVICE 400G passive copper twinax cables pass RoHS and REACH testing, with no restricted hazardous substances in jackets, conductors and shielding layers.
Q12: Can tight plastic zip ties be used for cable management of these 400G twinax cables? A12: Not recommended. Over-tight zip ties squeeze twinax pairs and alter impedance, triggering signal loss and link errors. Velcro straps are preferred for routing HYTOPTODEVICE high-speed passive copper twinax cables.
Q13: Can compressed air safely remove dust from QSFP-DD connector pins? A13: It can be used cautiously. Keep the can upright and maintain safe distance to avoid liquid propellant spray. HYTOPTODEVICE recommends dry fiber cleaning sticks as the primary cleaning method for QSFP-DD contacts.
Q14: What triggers port flapping on 400G passive copper twinax links? A14: Port flapping mainly arises from poor signal integrity, loose connector contact, over-bending, crushed twinax wiring, mismatched FEC settings or incorrect EEPROM coding. HYTOPTODEVICE strict factory testing reduces such risks.
Q15: Can a damaged 400G high-speed twinax cable be spliced or repaired? A15: No. Splicing destroys the precise controlled impedance of twinax pairs and breaks signal integrity. HYTOPTODEVICE advises direct replacement once shielding or conductors are damaged.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




