• hytoptodevice 200G QSFP56 to QSFP56 passive direct attach copper cable for data center
  • Bulk Wholesale 200G QSFP56 passive copper twinax cable for data center from HYTOPTODEVICE manufacturer
  • hytoptodevice low power consumption 200G QSFP56 dac cable for data center
  • Compatible 200G QSFP6 passive DAC twinax cable for data center from HYTOPTODEVICE
  • hytoptodevice 200G QSFP56 to QSFP56 passive direct attach copper cable for data center
  • Bulk Wholesale 200G QSFP56 passive copper twinax cable for data center from HYTOPTODEVICE manufacturer
  • hytoptodevice low power consumption 200G QSFP56 dac cable for data center
  • Compatible 200G QSFP6 passive DAC twinax cable for data center from HYTOPTODEVICE

Cisco Q56-200-CU50CM Compatible 200G QSFP56 to QSFP56 PAM4 Passive Copper Twinax Cable 0.5m(1.67ft) | HYTOPTODEVICE

Buy HYTOPTODEVICE 200G QSFP56 passive copper twinax cable, 0.5m Q56-200-CU50CM equivalent, pre-coded EEPROM for Cisco IOS-XE / NX-OS. In stock for fast shipment, factory direct price, bulk purchase available for distributors, resellers and system integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco Q56-200-CU50CM
2 Arista Networks CAB-Q56-Q56-0.5M
3 Dell DAC-Q56-200G-0.5M
4 NVIDIA/Mellanox  MCP1650-V00AE30 
5 Generic QSFP56-200G-CUxM
Description

Cisco Q56-200-CU50CM Compatible 200G QSFP56 to QSFP56 PAM4 Passive Copper Twinax Cable 0.5m(1.67ft) | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 0.5m 200G QSFP56 to QSFP56 passive copper twinax cable is a direct drop-in replacement for Cisco Q56-200-CU50CM. Built to SFF-8636 MSA and IEEE 802.3cd 200GBASE-CR4 standard, this passive twinax cable uses flexible 30AWG copper conductors, delivering full 200Gbps bandwidth over 4×50Gbps PAM4 lanes with zero power consumption. It is hot-swappable and pre-programmed with Cisco validated EEPROM signature for smooth recognition on Cisco IOS-XE and NX-OS firmware. Compact and highly flexible, this cable is widely used for in-rack 200G short links, AI server to leaf switch direct connection, HPC rack internal interconnection, high-density data center fabric deployment. HYTOPTODEVICE supports spot purchase, bulk wholesale, OEM private labeling, custom EEPROM programming and custom length service for this 200G QSFP56 passive copper twinax cable.

Key Technical Specifications

Cisco Compatible
Q56-200-CU50CM
Vendor Name HYTOPTODEVICE
Connector QSFP56 to QSFP56 Max Data Rate 200Gbps
Cable Length 0.5m (1.67ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.25W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols IEEE802.3cd, SFF-8436
Minimum Bend Radius 35mm Application 200G Ethernet and InfiniBand HDR

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Setting: Host QSFP56 port must enable 200GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.

  • Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.

  • Port Installation Standard: Works only with standard QSFP56 200G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.

  • Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Cisco Hardware & Firmware

  • Cisco Nexus 9364C, Nexus 9332D, Nexus 93180YC-FX3, Nexus 9800 series leaf-spine switches
  • Cisco UCS C220, C240, C245 M5/M6 servers with 200G QSFP56 NIC adapters
  • Cisco 8000 series routing platforms with QSFP56 ports
  • Firmware: NX-OS 9.3(8)+, IOS-XE 17.4.1+

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 200G QSFP56 passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 

• Short 0.5m in-rack 200G server-to-leaf switch direct links
• High-density AI compute rack internal interconnection
• HPC cluster local rack cabling for low latency workloads
• 200G leaf-spine fabric short-distance internal patch
• Data center high-speed network upgrade and hardware refresh
• Stock sourcing for distributors, resellers and system integrators

Connectivity Solutions(Applications) 

1. 200G to 200G Direct Link for Switch-Switch
HYTOPTODEVICE 200GBASE-CR4 passive copper twinax cable realize Native 200G PAM4 Transmission


2. 200G to 200G Direct Link for Switch-NIC
Factory wholesale compatible 200G QSFP56 passive copper twinax cable HYTOPTODEVICE



The Core Feature

1. Cost-Effective Ultra-Short Connectivity

Using twinax copper, the 200G passive copper cable replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

Short reach 200GBASE-CR4 QSFP56 passive DAC cable 0.5m for AI rack

2. Ultra-Low Power, Maximum Energy Efficiency

The 200g qsfp28 passive copper twinax cable draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 200G link for short-reach connections — within a rack or across adjacent racks.

200G QSFP56 to QSFP56 passive twinax DAC for data center switch

3.Host-Device Tested for Proven Interoperability

Every 200g passive copper twinax cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits? Compatibility Video available upon request.

hytoptodevice wholesale 200G QSFP56 twinax cable for data center

4. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  QSFP56  to QSFP56 200g qsfp56 dac cable for switches

FAQ

Q1: Can I purchase this Cisco compatible 200G QSFP56 twinax cable for mixed-vendor data center fabrics? A1: Yes, it works on MSA-compliant QSFP56 ports. HYTOPTODEVICE custom programs EEPROM on this passive copper twinax cable to eliminate transceiver alerts for multi-brand deployments.

Q2: Can this 200G QSFP56 DAC be plugged into older QSFP28 switch ports? A2: No, QSFP56 uses 50G PAM4 per lane, while QSFP28 is 25G NRZ. Electrical and signal standards differ and cannot establish reliable 200G links.

Q3: If I order this 0.5m 200G twinax cable, can I lock it down to 100G speed on the Cisco port? A3: Yes, many Cisco QSFP56 ports support speed reconfiguration. HYTOPTODEVICE can provide configuration notes to help buyers lock to 100G when needed.

Q4: Does Cisco NX-OS require specially coded EEPROM for this 200G passive twinax cable to pass transceiver checks? A4: Yes, NX-OS validates transceiver EEPROM signatures by default. HYTOPTODEVICE preloads Cisco matching codes on this twinax cable you purchase to skip unsupported transceiver warnings.

Q5: When I place bulk orders, can I pair this 200G QSFP56 DAC with third-party 200G NICs? A5: Yes, third-party NICs are acceptable if they follow MSA 200GBASE-CR4 standards. HYTOPTODEVICE runs cross-hardware compatibility testing to guarantee stable performance for wholesale buyers.

Q6: What is PAM4 signaling for 200G QSFP56 DAC cable? A6: PAM4 is 4-level pulse amplitude modulation. It carries 2 bits per symbol, doubling bandwidth vs NRZ at the same baud rate. This HYTOPTODEVICE 200G QSFP56 passive twinax cable uses 4×50G PAM4 lanes to hit 200Gbps, so it requires careful cable routing to preserve signal integrity.

Q7: What is the maximum reliable length for passive 200G QSFP56 twinax DAC cables I can source? A7: The stable transmission limit for passive 200GBASE-CR4 twinax design is 2 meters. HYTOPTODEVICE stocks this 200G QSFP56 cable in 0.5m,1m,1.5m and 2m standard lengths for your selection.

Q8: What latency performance will this 0.5m short 200G twinax cable bring to AI and HPC clusters? A8: Typical copper twinax latency is roughly 0.55 ns per meter. This passive DAC has no signal amplification chips, ideal for ultra-low-latency AI training workloads.

Q9: What wire gauge (AWG) is used in this cable, and does it affect flexibility? A9: Common gauges range from 30AWG to 26AWG. Thinner 30AWG delivers superior flexibility for dense in-rack routing, while 26AWG supports longer passive 200G links up to 2m. HYTOPTODEVICE supplies the correct AWG for every 200G QSFP56 twinax cable length you order.

Q10: Will this 200GBASE-CR4 passive twinax DAC automatically negotiate speed with connected devices? A10: No, passive 200GBASE-CR4 twinax does not support auto-negotiation. You need to manually lock both link ends to fixed 200G speed after receiving and installing this HYTOPTODEVICE DAC.

Q11: Why is PAM4 more sensitive to cable bending than 25G NRZ DAC? A11: PAM4 has narrower noise margin. Even minor deformation will trigger PAM4 bit errors, so this 200G passive DAC must follow the 35mm minimum bend radius we specified.

Q12: Are the two QSFP56 ends marked clearly so my cabling team can identify the cable specification easily? A12: Yes, each QSFP56 connector shell carries permanent laser marking. HYTOPTODEVICE marks every end of this passive twinax cable to simplify cabling audit and fault diagnosis.

Q13: Can this 0.5m Cisco 200G twinax DAC connect network devices housed in two separate server racks? A13: No, 0.5m is designed purely for in-rack local connections. This passive twinax cable is built for short patch links within the same cabinet, not inter-rack cabling.

Q14: Can bulk customers request custom jacket colors for this Cisco Q56-200-CU50CM compatible 200G DAC? A14: Black jacket is our standard stock version. HYTOPTODEVICE accepts custom color requests on bulk orders of this 200G QSFP56 twinax cable to match your site’s color coding rules.

Q15: Can I request non-standard custom lengths if standard 0.5/1/1.5/2m sizes do not match my rack layout? A15: Custom non-standard lengths are available for bulk procurement. Contact the HYTOPTODEVICE sales team for quotation and lead time when you buy custom-length 200G QSFP56 twinax cable.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • hytoptodevice 200G QSFP56 to QSFP56 passive direct attach copper cable for data center
  • Bulk Wholesale 200G QSFP56 passive copper twinax cable for data center from HYTOPTODEVICE manufacturer
  • hytoptodevice low power consumption 200G QSFP56 dac cable for data center
  • Compatible 200G QSFP6 passive DAC twinax cable for data center from HYTOPTODEVICE
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download