| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | Q56-200-CU1M | |
| 2 | Arista Networks | CAB-Q56-Q56-1M | |
| 3 | Dell | DAC-Q56-200G-1M | |
| 4 | NVIDIA/Mellanox | MCP1650-V001E30 | |
| 5 | H3C | QSFP56-200G-D-DAC-1M | |
| 6 | Huawei | QSFP-200G-CU1M | |
| 7 | Generic | QSFP56-200G-CUxM |
| Cisco Compatible |
Q56-200-CU1M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP56 to QSFP56 | Max Data Rate | 200Gbps |
| Cable Length | 1m (3ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE802.3cd, SFF-8436 |
| Minimum Bend Radius | 35mm | Application | 200G Ethernet and InfiniBand HDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP56 port must enable 200GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard QSFP56 200G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 200G QSFP56 passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: Do I need to enable specific port settings (bifurcation) on my switch to use this breakout cable? A1: This is a straight-through 200G QSFP56 to QSFP56 DAC cable, not a breakout variant. Bifurcation configuration is not required. You can directly connect two QSFP56 ports for 200G link negotiation. HYTOPTODEVICE provides matching coding to ensure smooth plug-and-play.
Q2: Can I connect this cable directly from a 200G switch port to standard 25G or 10G server ports? A2: No, this 200G direct attach copper cable does not natively support 25G or 10G speeds. Its electrical layout and EEPROM are tuned for 200G PAM4 signaling, so direct connection to 25G/10G ports will not establish a valid link.
Q3: Do I need to specify my switch brand when ordering? A3: Yes, you need to tell us your switch vendor before shipment. HYTOPTODEVICE programs the correct vendor EEPROM coding to guarantee plug-and-play recognition and avoid vendor lock or port error messages.
Q4: Will using a third-party DAC cable void my network hardware manufacturer's warranty? A4: It will not automatically void your hardware warranty. MSA-compliant third-party DACs like HYTOPTODEVICE 200G twinax cables follow industry specs, though you can confirm terms with your hardware vendor for full clarity.
Q5: Will auto-negotiation work out-of-the-box with this cable? A5: Auto-negotiation depends on your switch and NIC firmware. The passive DAC itself does not block negotiation, but proper vendor coding from HYTOPTODEVICE is a prerequisite for reliable auto-negotiation.
Q6: What is the maximum data rate supported per channel on a standard 4x50G breakout cable? A6: This is a straight 200G QSFP56 DAC instead of a breakout cable. It runs a full 200G PAM4 link across four 50G lanes, delivering an aggregate bandwidth of 200Gbps between two QSFP56 ports.
Q7: What is the maximum recommended cable length for passive 200G copper twinax cables? A7: Passive 200G DAC cables are limited to short distances due to high-frequency signal attenuation from PAM4 modulation, typically ranging from 0.5m to 3m. HYTOPTODEVICE strictly controls signal integrity to deliver stable links within this working range.
Q8: How does latency compare between 200G DAC cables and fiber optic solutions? A8: 200G passive DAC delivers lower latency than fiber. Copper twinax removes optical transceiver conversion delay, making HYTOPTODEVICE 200G DAC ideal for low-latency AI and HPC cluster workloads.
Q9: What wire gauge (AWG) is typically used for 200G twinax cables? A9: They commonly adopt 26AWG or 30AWG conductors. Thinner 30AWG delivers greater flexibility for tight routing, while thicker 26AWG is deployed to support the maximum passive reach for 200G PAM4 signals. HYTOPTODEVICE matches the AWG spec by cable length for optimized performance.
Q10: Are 200G PAM4 signals more sensitive to electromagnetic interference (EMI) than older 100G NRZ signals? A10: Yes, PAM4 signals are more susceptible to EMI. HYTOPTODEVICE’s twinax cables use full foil and braided shielding to suppress crosstalk and EMI and maintain stable signal integrity.
Q11: Can this cable handle heavy, continuous line-rate data traffic without dropping packets? A11: Yes, it supports sustained full line-rate traffic without packet loss. Every HYTOPTODEVICE 200G twinax cable passes insertion loss, return loss and eye diagram testing before delivery.
Q12: How flexible is a 200G copper twinax cable compared to a 100G cable? A12: 200G twinax cables are slightly stiffer than 100G NRZ DAC variants. Denser internal wiring and enhanced shielding requirements create this difference, so users must closely follow minimum bend radius guidelines during installation.
Q13: Can I run this cable between two different server racks? A13: No. Because passive copper DACs are restricted to very short distances (usually max 3 meters), they are strictly intended for intra-rack use. Cross-rack deployment will trigger severe signal attenuation and unstable links.
Q14: Will the weight of the cable put excessive physical strain on my switch ports? A14: Properly routed, it will not cause excessive strain. We recommend cable support brackets for heavier assemblies; our pull-tab design also reduces stress when plugging and unplugging.
Q15: What color options are available for the outer cable jacket? A15: Black is our standard jacket color. HYTOPTODEVICE supports custom jacket colors for bulk OEM orders, subject to minimum order quantity requirements.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




