• Cisco ONS-SI-155-I1 Compatible  OC-3/STM-1 IR-1 SFP Transceiver Module | 1310nm 15km SMF LC Bulk Wholesale | HYTOPTODEVICE
  • Cisco ONS-SI-155-I1 Compatible  OC-3/STM-1 IR-1 SFP Transceiver Module | 1310nm 15km SMF LC Bulk Wholesale | HYTOPTODEVICE
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Extreme Compatible 100M SFP Fiber transceiver Module
  • Cisco ONS-SI-155-I1 Compatible  OC-3/STM-1 IR-1 SFP Transceiver Module | 1310nm 15km SMF LC Bulk Wholesale | HYTOPTODEVICE
  • Cisco ONS-SI-155-I1 Compatible  OC-3/STM-1 IR-1 SFP Transceiver Module | 1310nm 15km SMF LC Bulk Wholesale | HYTOPTODEVICE
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Extreme Compatible 100M SFP Fiber transceiver Module

Cisco ONS-SI-155-I1 Compatible OC-3/STM-1 IR-1 SFP Transceiver Module | 1310nm 15km SMF LC Bulk Wholesale | HYTOPTODEVICE

Cisco ONS-SI-155-I1 compatible SFP transceiver, OC-3/STM-1 IR-1 rated, 155Mbps speed, 1310nm wavelength, 15km single-mode transmission with LC duplex interface. DDM-enabled, zero-alarm Cisco compliant optic for carrier-grade networking, available for bulk wholesale. Bulk wholesale, private label and custom EEPROM programming are available for global importers, distributors and system integrators.  
NO. Brand  Compatible P/N Remarks
1 Cisco  ONS-SI-155-I1
2 Alcatel-Lucent  3HE00035AA 
3 Avago  AFCT-5760APZ 
4 HPE  JD120A
5 Juniper  SFP-1OC3-IR
6 Foundry Networks  E1MG-100FX-IR 
Description

Cisco ONS-SI-155-I1 Compatible OC-3/STM-1 IR-1 SFP Transceiver Module | 1310nm 15km SMF LC Bulk Wholesale | HYTOPTODEVICE

Product Overview

The Cisco ONS-SI-155-I1 compatible SFP transceiver delivers high-performance, cost-effective optical connectivity for SONET OC-3 and SDH STM-1 networks. Meeting and exceeding OEM specifications, this hot-swappable SFP module offers plug-and-play, alarm-free compatibility with Cisco ONS optical transport platforms for simple network upgrades and module replacements.
Operating at 155 Mbps over single-mode fiber, this IR-1 transceiver features a 1310nm FP laser and supports up to 15km transmission. Equipped with a duplex LC connector and built-in DDM/DOM real-time monitoring, it complies with SFP MSA, ITU-T G.957 and Telcordia GR-253-CORE standards, ensuring reliable, long-term carrier-grade operation.

Key Technical Specifications

Cisco Compatible    ONS-SI-155-I1 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 155Mbps
Wavelength 1310nm Max  Distance 15KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type SMF Receiver Type PIN
TX Power -14~-8dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols  MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard G.652.D duplex single-mode fiber (SMF) with LC-PC/UPC connectors. Multimode fiber is not supported and will fail to reach 10km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 18dB link budget for 15km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. Keep away from extreme heat, moisture, and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Bulk Deployment

    Standardize fiber types and port settings across enterprise LAN or ISP deployments for consistent performance.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware

This ONS-SI-155-I1 compatible SFP module adopts original factory-level firmware calibration, achieving zero-alarm and zero-log recognition on Cisco ONS series optical transmission platforms. It fully matches the official OC-3/STM-1 IR-1 industrial standards, supporting hot swap and plug-and-play operation without CLI configuration, perfectly suitable for equipment replacement, capacity expansion and batch upgrade of Cisco carrier networks.
  • Compatible Core Platforms: Cisco ONS 15454, ONS 15310 series optical transmission devices
  • Standard Adaptation: Strictly compliant with Cisco IR-1 intermediate reach specifications, matching 15km carrier transmission link requirements
  • System Compatibility: Fully compatible with Cisco IOS and optical transport system software, no unrecognized transceiver alarms

2. Multi-Brand Cross Compatibility

This SFP Module complies with universal MSA standards for stable multi-brand interoperation. Custom firmware is available for mixed-vendor network SFP Module bulk deployment and procurement

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp modules  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Carrier SDH/SONET Transmission: Professional OC-3/STM-1 IR-1 links for telecom operator access and backbone transmission networks
  • Cisco ONS Platform Upgrade & Replacement: Direct replacement for original ONS-SI-155-I1 modules for network renovation and capacity expansion
  • Enterprise Private Long-Distance Networking: Stable 15km long-haul interconnection for enterprise cross-region branch private networks
  • Industrial Stable Data Transmission: Reliable 155Mbps high-stability transmission for industrial monitoring and dedicated communication links

Connectivity Solutions(Applications)

Deploy paired HPE(H3C) compatible SFP Module with G.652.D single-mode fiber to establish stable 10km 100Mbps point-to-point links for campus and enterprise network construction.

100M FAST ETHERNET COMPATIBLE optical module

The Core Feature

1. Low-Power Data Center Efficient Connectivity

With ultra-low power consumption below 1W, this 100BASE SFP provides stable, cost-effective Fast Ethernet connectivity. It is an economical solution for data center, campus and enterprise low-speed access networking.

Low Power 100BASE-LX SFP Transceiver for Data Center and ISP Network


2.
Verified Host Interoperability for Devices

Pre-flashed EEPROM supports hot-swap plug-and-play. The module is fully recognized by mainstream HPE(H3C) devices without alarms or configuration adjustments, enabling seamless network replacement and upgrade.
HYTOPTODEVICE Zero Alarm Plug and Play Cisco Compatible 100M SFP Fiber Module

3.Rigorous Testing, Uncompromising Reliability

Each SFP undergoes wavelength calibration, power testing, 72-hour aging and 10km link testing. Full quality inspection ensures stable batch performance and long-term reliable operation for engineering projects.

HYTOPTODEVICE MSA Compliant Replacement Optical Transceiver Full Tested


FAQ
Q1: What firmware issues cause JD120B third-party SFP Module unrecognized on HPE switches?
A: Most unrecognized faults stem from mismatched EEPROM vendor codes and protocol signatures that do not conform to HPE JD120B official standards. Our custom-programmed SFP Module adopts HPE-specific firmware, achieving zero-alarm plug-and-play without manual command activation or port unlocking.

Q2: Can JD120B 100BASE-LX SFP Module support 15km extended transmission distance?
A: The standard specification of JD120B SFP Module is 10km transmission. Though its optical power margin can support short 15km links in low-loss fiber environments, long-term 15km operation may cause unstable BER and packet loss. For 15km+ scenarios, dedicated long-reach optical modules are recommended.

Q3: Why does my JD120B SFP Module show normal optical power but no link up?
A: This issue is usually caused by mismatched port rate negotiation, incorrect duplex mode settings, or non-standard fiber connector polishing. Verify switch port 100Mbps fixed rate configuration and use UPC fiber cables to match the SFP Module optical interface standards.

Q4: Is it necessary to disable HPE transceiver security check for third-party JD120B SFP Module?
A: No manual security check disabling is required. Our JD120B compatible SFP Module simulates official factory data, which can pass HPE default transceiver authentication mechanisms, avoiding configuration modifications and device security risks.

Q5: What causes intermittent link flapping of 10km JD120B SFP Module fiber links?
A: Common triggers include dirty LC connector end faces, excessive fiber bending radius, loose fiber splicing points, and ambient temperature fluctuations exceeding the module’s optimal range. Regular cleaning and standardized cabling can solve most flapping problems.

Q6: Can JD120B 100BASE-LX SFP Module be paired with third-party 100BASE-FX modules?
A: Cross pairing is not recommended. JD120B is a single-mode 100BASE-LX SFP Module, while 100BASE-FX is mostly multimode. Mismatched fiber medium and optical design will lead to serious power deviation and complete link failure.

Q7: What temperature environment is suitable for long-term operation of JD120B SFP Module?
A: This commercial-grade SFP Module supports stable operation at 0°C to 70°C. Long-term operation in high-temperature (>60°C) or humid environments will accelerate laser aging and shorten service life; constant temperature and dry cabinet deployment is recommended.

Q8: Does JD120B SFP Module support port speed locking on H3C fixed-rate ports?
A: Yes. This JD120B SFP Module supports both auto-negotiation and manual 100Mbps speed locking on H3C and HPE dual-rate ports, maintaining stable rate output without speed drift or downgrade failure.

Q9: How to distinguish genuine and high-quality compatible JD120B SFP Module?
A: Reliable compatible SFP Module must have standard -15~-8dBm transmit power and -32dBm high sensitivity, complete DDM monitoring functions, and zero-alarm recognition on HPE/H3C devices. Our modules pass full optical testing and aging screening to ensure original-level performance.

Q10: Will mixed deployment of OEM and compatible JD120B SFP Module affect network stability?
A: No negative impact. Our compatible JD120B SFP Module fully conforms to official optical parameters and protocol standards, supporting mixed networking with original OEM modules without link conflict or performance difference.

Q11: What DDM data should I monitor daily for JD120B SFP Module maintenance?
A: Focus on real-time transmit/receive optical power, operating temperature and supply voltage. Abnormal power attenuation or over-temperature alerts are early warning signs of SFP Module aging or fiber link faults.

Q12: Can JD120B SFP Module work normally after long-distance fiber splicing?
A: Yes. This SFP Module reserves sufficient optical power budget to tolerate normal splicing and connector loss. Excessive repeated splicing will cause cumulative loss; professional fiber fusion and testing are required for multi-section fiber links.

Q13: What are the differences between JD120B 100M LX and ordinary gigabit LX SFP Module?
A: JD120B is dedicated 100Mbps Fast Ethernet SFP Module with fixed 100BASE-LX protocol, while gigabit LX modules focus on 1000Mbps transmission. The two have different rate protocols and cannot be universally replaced on fixed-rate ports.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • Cisco ONS-SI-155-I1 Compatible  OC-3/STM-1 IR-1 SFP Transceiver Module | 1310nm 15km SMF LC Bulk Wholesale | HYTOPTODEVICE
  • Cisco ONS-SI-155-I1 Compatible  OC-3/STM-1 IR-1 SFP Transceiver Module | 1310nm 15km SMF LC Bulk Wholesale | HYTOPTODEVICE
  • Bulk Wholesale 10km 100BASE-LX SFP Transceiver with DDM Monitoring
  • Zero Alarm Plug and Play Extreme Compatible 100M SFP Fiber transceiver Module
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download