Cisco DWDM-SFP10G-36.61 Compatible 10G DWDM SFP 80km Transceiver | 1536.61nm C51 100GHz, Single Mode, APD Receiver, DOM MonitoringProduct Overview
HYTOPTODEVICE Cisco DWDM-SFP10G-36.61 Compatible 10G DWDM SFP 80km Transceiver is a carrier-grade, long-reach optical module engineered for Cisco metro backbones, OTN transport, and enterprise long-span DWDM networks. Compliant with SFP+ MSA and ITU-T G.694.1 standards, this transceiver operates on the 1536.61nm wavelength (C-Band, CH51) with 100GHz channel spacing, delivering stable 10.3125Gbps full-duplex data transmission up to 80km over single-mode fiber (G.652/G.655).
Pre-flashed with dedicated Cisco adaptive EEPROM firmware, it guarantees seamless, zero-alarm plug-and-play interoperability across all Cisco IOS and IOS-XE platforms. Featuring an industrial-grade EML laser, fast-response TEC cooling, and a high-gain APD receiver, the module delivers outstanding wavelength locking precision, exceptional weak-signal sensitivity, and robust anti-interference performance. Each unit undergoes 100% wavelength calibration, thermal aging, and real-switch testing to provide a cost-effective, reliable long-haul solution for large-scale, multi-channel DWDM multiplexing projects.
Key Technical Specifications
Designed for seamless integration and carrier-grade reliability, our 10G DWDM SFP 80km Transceiver undergoes 100% factory testing to guarantee zero-error transmission. The following technical specification table outlines the detailed hardware parameters, optical characteristics, and regulatory compliances for the 1536.61nm (CH51) transceiver.
| Cisco Compatible |
DWDM-SFP10G-36.61 |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
11.0957Gbps |
| Wavelength |
1536.61nm |
Max Distance |
80km |
| Connector |
Simplex LC |
Transmitter Type |
DWDM EML |
| Cable Type |
SMF |
Receiver Type |
APD |
| TX Power |
-1~+5.0dBm |
Receiver Sensitivity |
< -23dBm |
| Max. Power Consumption |
≤1.7W |
DOM/DDM |
Fully Supported |
| Protocols |
SFP+ MSA, SFF-8472, IEEE 802.3ae, RoHS Compliant |
Operation Temperature |
0 to 70°C (32 to 158°F) |
Usage Guidelines & Laser Safety
Operators must wear ESD anti-static wrist straps during 10G DWDM SFP+ Transceiver installation to avoid static damage to internal optical chips and circuits. Never observe powered LC ports directly, as invisible infrared laser may cause permanent eye injury. For testing distances below 10km, install 15–20dB optical attenuators to prevent APD receiver saturation and signal distortion. Clean fiber end faces thoroughly before docking to reduce insertion loss. Reserve sufficient cabinet airflow for densely deployed 10G DWDM SFP+ Transceivers to avoid thermal accumulation and wavelength drift. Regularly check DOM monitoring data for proactive network maintenance.
When the Cisco compatible 10G DWDM SFP+ transceiver is used in short distance transmission, please match it with the appropriate attenuator according to the table.
Full Compatibility List & Supported Network Hardware
1.Native Cisco Platform Compatibility
HYTOPTODEVICE Cisco DWDM-SFP10G-50.12 compatible 10G DWDM SFP+ Transceiver features pre-flashed official Cisco adaptive firmware, completely eliminating gbic-invalid and unsupported transceiver alarms. It supports full DOM data identification and zero-packet-loss operation without manual configuration, achieving seamless compatibility with mainstream Cisco network hardware.
Supported Cisco Hardware Models:
- Cisco Catalyst 3650 Series Switches
- Cisco Catalyst 3850 Series Switches
- Cisco Catalyst 9200/9300 Series Switches
- Cisco ISR 4000/4300/4400 Enterprise Routers
- Cisco ASR 1000 Series Aggregation Routers
- Cisco Nexus 7000/9000 Data Center Core Switches
- Cisco OTN/ONS DWDM Service Platforms
2.Multi-Brand Cross Compatibility
This 10G DWDM SFP+ Transceiver covers two full compatibility categories to match nearly all mainstream network hardware on the market: Open-Brand Compatibility and Locked-Brand Compatibility. Open-Brand series includes MikroTik, Ubiquiti, TP-Link, D-Link, Zyxel, Fortinet, Ruijie and other universal SFP slot devices, which realize plug-and-play running without any firmware rewriting. Locked-Brand series covers Cisco, Arista, Juniper, H3C, Huawei, HP/Aruba, Dell, Brocade, Intel and other vendor-locked switches and routers, which require customized professional firmware adaptation to complete stable identification and normal service operation. At HYTOPTODEVICE, we build an independent professional compatibility testing laboratory, where more than 150 types of mainstream brand switches, routers and optical transport equipment run continuous cyclic compatibility tests all year round. We can provide official compatibility test videos and full verification reports to fully guarantee stable multi-brand hybrid networking performance of our 10G DWDM SFP+ Transceiver.
3. Free Custom EEPROM & Bulk OEM Service
We offer free Cisco firmware optimization, precise wavelength offset calibration and dual-vendor coding for bulk orders of 10G DWDM SFP+ Transceivers. Support private label printing, personalized parameter tuning and tiered bulk discounts, serving global optical module distributors, system integrators and telecom engineering purchasers.
Primary Application Scenarios
This 1550.12nm C34-channel 10G DWDM SFP+ Transceiver is specialized for long-span multi-wavelength DWDM transmission, widely deployed in carrier and enterprise Cisco network infrastructure:
1. Cross-city Metro DWDM Backbone Trunks: Realize high-efficiency multi-wavelength multiplexing with this 10G DWDM SFP+ Transceiver to save fiber resources and stabilize long-distance trunk transmission.
2. Data Center Cross-region Interconnection: This 10G DWDM SFP+ Transceiver supports 80km low-latency private line transmission for data synchronization and cross-base disaster recovery backup.
3. Enterprise Cross-park Long-distance Uplinks: Deploy high-stability 10G DWDM SFP+ Transceiver to solve long-span transmission bottlenecks for multi-branch enterprise core networks.
4. Remote Broadband Backhaul Networks: Utilize DWDM wavelength division technology of the 10G DWDM SFP+ Transceiver to expand long-distance broadband coverage with limited fiber resources.
5. Carrier OTN & Smart City Aggregation Links: This carrier-grade 10G DWDM SFP+ Transceiver provides reliable high-speed 10G transmission for OTN equipment and remote monitoring aggregation nodes.
Connectivity Solutions(Applications)
1.80km Long-haul 10G DWDM Transmission for OTN Platform
Deploy paired Cisco-compatible 1550.12nm 10G DWDM SFP+ Transceivers on standard OTN chassis. Leverage the module’s high-gain APD receiver and abundant power budget margin to achieve stable 80km long-distance 10G signal transmission, ideal for carrier-grade cross-city metropolitan backbone network construction.
2. 100GHz Grid Multi-channel DWDM Mux Demux Networking
Match this C34 100GHz fixed-grid 10G DWDM SFP+ Transceiver with standard passive MUX/DEMUX devices. Multiple 10G service signals are multiplexed on a single fiber for simultaneous transmission, greatly improving fiber utilization and reducing long-haul network deployment and operation costs.
Features
1. High Capacity Long-haul DWDM Transmission
This high-quality 10G DWDM SFP+ Transceiver is precisely tuned for the 1550.92nm C34 channel, supporting stable multi-wavelength DWDM multiplexing up to 80km. With excellent chromatic dispersion tolerance and low signal distortion, the 10G DWDM SFP+ Transceiver minimizes bit error rates on long single-mode fiber spans, maximizing existing fiber utilization for cross-city metro backbone and carrier OTN transmission networks.
2.Stable 10G Connectivity for Data Center
Equipped with upgraded high-gain APD receiver chips, this bulk deployable long-haul 10G DWDM SFP+ Transceiver delivers superior weak signal capture capability compared with ordinary PIN modules. It effectively identifies severely attenuated optical signals after 80km transmission, eliminating link flapping and intermittent disconnections. This feature ensures stable 10G service continuity for long-span, high-loss fiber networking environments inside large-scale data center clusters.
3. Powered by MACOM Core Architecture
At the heart of our 10G SFP+ DWDM transceiver lies the industry-leading MACOM chipset. This premium internal architecture delivers exceptional signal integrity and high-speed data processing capabilities. By integrating MACOM’s advanced silicon technology, the module ensures ultra-low jitter, optimal power efficiency, and rock-solid performance even in high-density, continuous-load network environments.
4. Full Cisco Zero-alarm Interoperability
Factory pre-flashed with authentic Cisco native firmware, the C34 channel 10G DWDM SFP+ optical transceiver maintains zero alarms and error-free transmission when deployed on all mainstream Cisco switching and routing platforms. Complimentary bespoke dual-vendor EEPROM coding services are included for bulk purchases, delivering adaptive device recognition compatibility with a full spectrum of popular open-standard and vendor-locked network hardware.
Our proprietary independent compatibility laboratory executes long-duration cyclic reliability testing across 150+ mainstream network equipment variants. Authorized compatibility test videos and official validation reports can be supplied to satisfy project assessment and customer audit requirements, fully accommodating multi-brand hybrid network architectures and large-scale batch rollout applications.
5.Strict Quality Screening with Complete Test Records
All third-party compatible 10G DWDM SFP+ Transceivers undergo multi-stage rigorous reliability testing, including high-precision wavelength calibration, professional photoelectric performance inspection, and high-low temperature cycle aging and real-machine compatibility verification. Each finished 10G DWDM transciver module comes with complete standardized qualified test records. For bulk order customers, we can provide detailed official product shipment quality reports to support project filing, quality inspection and engineering acceptance.
FAQ
Q1: What laser hardware does HYTOPTODEVICE integrate into 10G DWDM SFP+ Transceiver to secure stable long-distance fiber transport?
A1: Our HYTOPTODEVICE 1550.12nm C34 10G DWDM SFP+ Transceiver adopts industrial EML laser as its core light-emitting component. Combined with high-precision factory wavelength tuning and built-in TEC constant temperature locking modules, this laser maintains ultra-narrow spectral width and mild power fluctuation. It delivers steady optical signals to realize error-free 80km single-mode fiber transmission, eliminating the need for extra dispersion compensation equipment for metro DWDM backbone links.
Q2: What reserved optical power budget margin is built into this C34 channel 10G DWDM SFP+ Transceiver to adapt to various on-site fiber loss conditions?
A2: HYTOPTODEVICE’s technical team reserves sufficient professionally calibrated optical power budget headroom during the design of this 1550.12nm C34 10G DWDM SFP+ Transceiver. This extra buffer counteracts natural fiber attenuation, splicing point loss and insertion loss from LC connectors, sustaining stable 80km transmission performance even on aged, high-loss field fiber without standalone optical amplifiers.
Q3: What ultra-low Bit Error Rate standard can this telecom-grade 10G DWDM SFP+ Transceiver maintain under continuous full-load working mode?
A3: This 1550.12nm C34 10G DWDM SFP+ Transceiver achieves industry-leading ultra-low BER up to 10^-12 under full-load continuous operation, fully meeting strict telecom transmission standards. Rigorous factory photoelectric parameter calibration suppresses signal noise and external interference, realizing lossless and stable 10G data transmission for long-distance cross-city DWDM core trunk networks.
Q4: Is HYTOPTODEVICE 10G DWDM SFP+ Transceiver fully compatible with mainstream fixed-wavelength DWDM multiplexer and demultiplexer passive rack devices?
A4: This 1550.12nm C34 10G DWDM SFP+ Transceiver strictly complies with ITU-T 100GHz grid wavelength specifications, supporting plug-and-play matching with all mainstream fixed-wavelength Mux/Demux units on the market. Each transceiver undergoes independent channel matching verification before delivery, with accurate wavelength positioning to avoid extra signal attenuation and cross-channel crosstalk during multi-wavelength multiplexing, adapting to all traditional fixed-grid DWDM network topologies.
Q5: Will mainstream switch operating systems pop up "Unsupported Transceiver" warning prompts when identifying this third-party 10G DWDM SFP+ Transceiver?
A5: All HYTOPTODEVICE 1550.12nm C34 10G DWDM SFP+ Transceivers are pre-flashed with customized EEPROM firmware adapted to major switch brands. Optimized chip identification data completely removes the "Unsupported Transceiver" alert on Cisco and other brand switch OS, enabling full hardware recognition and complete function activation without manual terminal configuration.
Q6: How accurate are the real-time monitoring data collected by DDMI and DOM digital diagnostic functions of this 10G DWDM SFP+ Transceiver?
A6: The built-in DDMI/DOM monitoring chip of this 1550.12nm C34 10G DWDM SFP+ Transceiver undergoes precise factory calibration for all monitoring indicators including transmit/receive optical power, internal operating temperature and laser bias current. The deviation of all real-time detection data is controlled within industrial standard allowable range, providing highly credible reference basis for daily network monitoring and early fault troubleshooting.
Q7: How will the running status of this 10G DWDM SFP+ Transceiver change during the switch firmware upgrade process?
A7: The 1550.12nm C34 10G DWDM SFP+ Transceiver owns stable hot-swap and reliable hardware identification logic. When the switch executes firmware upgrade tasks, the transceiver will temporarily pause data transmission without abnormal crash or permanent locking failure. After the upgrade completes, the switch will automatically re-identify the optical module and restore full 10G transmission capacity without manual re-plugging operation.
Q8: Will this 10G DWDM SFP+ Transceiver suffer from overheating failure after being installed in fully loaded 48-port switch racks?
A8: Equipped with independent TEC active heat dissipation and intelligent over-temperature protection circuit, this 1550.12nm C34 10G DWDM SFP+ Transceiver perfectly adapts to dense full-population 48-port rack deployment scenarios. Once the cabinet temperature rises sharply, the transceiver will automatically reduce laser operating power to lower heat generation, preventing burnout of internal optical chips and supporting long-term stable operation in poorly ventilated cabinet environments.
Q9: Will long-term high-temperature operation inside the cabinet shorten the overall service cycle of this long-reach 10G DWDM SFP+ Transceiver?
A9: Our 1550.12nm C34 10G DWDM SFP+ Transceiver adopts upgraded heat-conducting shell and wide-temperature resistant internal electronic components. The intelligent thermal protection system avoids long-term high-temperature aging of laser chips and circuit boards. Even under uninterrupted operation in high-temperature racks, it can maintain complete performance and extend the whole service cycle without premature failure.
Q10: What complete standardized reliability inspection processes will each 10G DWDM SFP+ Transceiver pass before factory delivery?
A10: Every HYTOPTODEVICE 1550.12nm C34 10G DWDM SFP+ Transceiver goes through a full set of multi-stage strict standardized testing flows before leaving the factory, covering wavelength calibration, BER performance testing, high-low temperature cycle aging, 80km link simulation, repeated plug durability test and cross-brand equipment compatibility verification. We retain complete standardized test records for every single product and can provide official Product Quality Reports for all bulk order customers.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.
Rigorous Industrial Product Testing
100% 3rd Party Compatible
Partial Test Demonstration
Others
