• HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center
  • HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center

Cisco CWDM-SFP-1570-120 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1570nm 120km Bulk Wholesale | HYTOPTODEVICE

Factory direct Cisco CWDM-SFP-1570-120 compatible 1.25G CWDM SFP module. High-performance 1570nm ultra-low-loss wavelength supports 120km passive long-haul transmission over G.652.D OS2 fiber. Zero-alarm multi-brand compatibility, full DDM monitoring, low power consumption. Bulk wholesale & custom firmware service for ISP backbone and enterprise CWDM ring network projects. 
NO. Brand  Compatible P/N Remarks
1 Cisco CWDM-SFP-1470-120
2 Cisco CWDM-SFP-1490-120
3 Cisco CWDM-SFP-1510-120
4 Cisco CWDM-SFP-1530-120
5 Cisco CWDM-SFP-1550-120
6 Cisco CWDM-SFP-1570-120
7 Cisco CWDM-SFP-1590-120
8 Cisco CWDM-SFP-1610-120




Description

Cisco CWDM-SFP-1570-120 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1570nm 120km Bulk Factory Wholesale

Product Overview
      This 1.25G 1570nm 120km CWDM SFP is fully pin-to-pin compatible with Cisco CWDM-SFP-1570-120 original modules. Compliant with 1000BASE-CWDM and universal SFP MSA standards, it delivers stable 120km passive transmission over standard OS2/G.652.D single-mode fiber, ideal for long-haul trunk and multi-service CWDM networking.
      Featuring ultra-low fiber attenuation and minimal chromatic dispersion. It outperforms other CWDM bands in ultra-long-distance stability, perfectly matching 1470–1610nm full-spectrum channels for complete CWDM ring network construction and fiber capacity upgrade projects.
      Pre-calibrated professional firmware ensures zero-alarm plug-and-play operation on Cisco and mainstream multi-brand devices. Supporting hot-swap and full SFF-8472 DDM real-time monitoring, our factory provides bulk wholesale, OEM logo customization, dedicated firmware modification and neutral export packaging for global system integrators and ISP operators.

Key Technical Specifications
 
Cisco Compatible CWDM-SFP-1570-120 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1570nm Max  Distance 120KM
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type APD
TX Power 0~+5dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤1W Receiver Overload -3.0dBm
Protocols IEEE 802.3z, SFF‑8472, SFP MSA, RoHS‑6, Class 1 Laser Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber Matching: Use OS2 9/125μm single-mode fiber (up to 120km). Use standard LC-UPC connectors only; LC-APC connectors are strictly prohibited.

  • Optical Attenuation (Crucial): Never direct-connect short links (<20km). If received power exceeds -3 dBm, add an inline optical attenuator (5–10 dB) at the Rx port to prevent receiver burnout.

  • Connection & Rx/Tx Check: Ensure correct Tx/Rx fiber pairing. Keep LC connector end-faces clean to avoid extra insertion loss and bit errors.

  • Link Budget: Account for total optical loss (splices, adapters, fiber distance) before deployment to stay within the 24 dB link budget.

  • Thermal Management: Operating temp: 0°C to 70°C. Avoid dense stacking of high-power 80km SFPs to prevent overheating.

  • Hot-Swapping: Supports hot-plugging. Gently insert/pull using the bail latch to protect port pins.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
Custom Cisco-matched EEPROM signature ensures zero alarms, no port blocking and no system log errors. No manual configuration or firmware upgrade required, supporting true plug-and-play deployment for all compatible Cisco network devices.

Fully Compatible Cisco Platforms:
  • Cisco Catalyst 2960, 3560, 3750, 3850, 9200, 9300 Enterprise Switches
  • Cisco ISR 4000/4300/4400 Series Enterprise Branch Routers
  • Cisco ASR 1000 Series Aggregation Service Backbone Routers
  • Cisco Firepower Security Firewall & Access Gateway Devices
  • All Cisco devices supporting original CWDM-SFP-1570-120 transceiver modules

2. Multi-Brand Cross Compatibility

This module follows universal SFP MSA norms. It works smoothly with Huawei, H3C, Arista, Juniper, HPE, Ruijie and ZTE devices. We provide free firmware customization for mixed-brand network environments.

3. Free Value-Added Services

HYTOPTODEVICE offers competitive bulk pricing for resellers, system integrators and data center contractors. We provide free special compatible EEPROM reprogramming for all bulk orders.
Available options include private label printing, custom packaging and deployment consulting. All modules pass optical calibration, temperature cycling and 72-hour full-traffic burn-in. Large-volume orders enjoy tiered discounts to reduce project CAPEX.

Primary Application Scenarios

  • 120km cross-city ultra-long trunk links for ISP and telecom backbone networks
  • 1570nm core stable channel for full-band CWDM ring network expansion and upgrade
  • Long-distance cross-branch enterprise campus and park core data transmission
  • Remote base station, industrial monitoring and outdoor long-distance network extension
  • Legacy single-fiber network capacity upgrade for multi-wavelength multiplexing service expansion
Connectivity Solutions(Applications)

1.
1G Long-Haul CWDM Direct Connection with Network Switches
Supports independent passive point-to-point fiber transmission without CWDM multiplexers. Simplifies network structure, reduces equipment investment and maintenance costs, perfectly suited for 120km cross-station long-haul trunk link deployment.

1570nm 120km ultra-long point-to-point trunk link for cross-city ISP network

2. 1G CWDM Direct Connection with Mux/Demux

Fully compatible with standard CWDM MUX/DEMUX passive devices. As the core high-stability long-wave channel, 1570nm cooperates with 1470–1610nm full-band wavelengths to maximize single-fiber bandwidth and realize large-scale CWDM spectrum network expansion.

1570nm initial CWDM channel for full-band multi-wavelength network expansion


The Core Feature

1. Low Power & Cost-Effective Single-Fiber CWDM Solution

Adopting ultra-low-power chip design, the module power consumption is less than 1W, effectively reducing long-term network operation power costs. It supports high-efficiency single-fiber multiplexing transmission without additional EDFA amplifiers, greatly lowering the overall investment of 120km long-haul trunk projects.

1510nm low-loss initial band CWDM SFP Cisco plug and play zero-error module


2.
Verified Host Interoperability for Huawei Devices

Professionally calibrated firmware realizes zero-alarm plug-and-play recognition for Cisco devices. All modules pass strict compatibility tests with Huawei, H3C, Juniper, MikroTik and other mainstream brands, ensuring stable and error-free operation in hybrid network environments.
1.25G 120km ultra-long reach CWDM transceiver with intelligent DDM diagnosis

3.Rigorous Testing, Uncompromising Reliability

Every batch of modules undergoes rigorous standardized tests, including high and low temperature cycling aging, 120km long-link stability test, optical power calibration and full DDM function verification. Strict quality control ensures consistent batch performance and long-term stable operation.
HYTOPTODEVICE 1.25g sfp module cwdm 120km smf for comprehensive test


FAQ

Q1: What risks do high-power 120km CWDM SFPs face regarding receiver damage?
A: 120km-class CWDM transceivers feature elevated transmit power to support ultra-long fiber spans. When deployed in short-reach links under 10km without proper attenuation, excessive incoming optical power oversaturates the receiver diode. This causes signal clipping, continuous CRC errors, and permanent receiver burnout. Always apply matched attenuation for short-distance onsite or lab testing.

Q2: What attenuation is mandatory during lab bench testing for 120km CWDM modules?
A: Due to the high Tx power rating of 120km CWDM modules, testers must install a fixed optical attenuator between Tx and Rx ports during bench validation. A 20dB to 25dB attenuation value is required to simulate real long-span fiber loss, protect the sensitive receiver component, and avoid irreversible module damage during loopback testing.

Q3: What laser chip technology powers 1.25G 120km CWDM SFP modules?
A: Our 1570nm long-haul CWDM SFPs utilize industrial-grade DFB (Distributed Feedback) laser chips. Compared with conventional FP lasers, DFB technology delivers tighter wavelength tolerance, lower dispersion drift, and higher output stability. This ensures clean error-free transmission even under full-load 120km long-span operating conditions.

Q4: Why must 120km CWDM deployments use G.652.D fiber instead of older G.652.A/B?
A: Legacy G.652.A/B fiber exhibits higher intrinsic attenuation and inconsistent dispersion performance over ultra-long distances. At 120km spans, cumulative loss exhausts the module’s power budget, triggering unstable links and random packet loss. G.652.D low-loss single-mode fiber provides optimized loss characteristics and uniform signal propagation, fully compliant for reliable 120km passive CWDM operation.

Q5: Are 1.25G 120km CWDM SFPs universally compatible with standard SFP slots?
A: Yes. These gigabit CWDM transceivers strictly follow global SFP MSA mechanical and electrical specifications. They feature standard pinout dimensions, hot-swap circuitry, and industry-standard power profiles, allowing universal insertion into any native SFP port without port restrictions, configuration changes, or hardware modifications.

Q6: Do 120km CWDM modules support multi-brand compatibility across Cisco, Huawei, Juniper, MikroTik?
A: Fully cross-brand compatible. Each module is pre-flashed with brand-specific calibrated firmware to match mainstream vendor platforms. The customized EEPROM signature eliminates compatibility errors, system alarms, and port lockdown issues. All units undergo real-device verification on Cisco, Huawei, Juniper, and MikroTik equipment for stable mixed-network operation.

Q7: What is the actual power draw of a 1.25G 120km CWDM SFP transceiver?
A: Designed with energy-efficient chip architecture, these long-reach CWDM modules maintain ultra-low power consumption below 1W per unit. The optimized circuit design reduces continuous heat generation and long-term power expenditures, making them ideal for large-scale ISP backbone and enterprise CWDM ring deployments requiring 24/7 uptime.

Q8: How does rising ambient temperature affect CWDM laser wavelength performance?
A: Operating temperature fluctuations directly influence laser cavity wavelength stability. High ambient heat causes minor wavelength shifting, which can degrade channel isolation in dense CWDM multiplexing environments. Our modules undergo rigorous thermal aging and wavelength calibration during production to minimize drift, sustaining precise 1570nm channel accuracy across varying temperature conditions.

Q9: Why do OTDR scans detect unexpected high-loss points on long CWDM fiber spans?
A: Sporadic high-loss markers on OTDR traces typically stem from imperfect field construction quality, including misaligned fiber splices, contaminated end faces, loose connector couplings, or aged fiber segments. These discrete loss points gradually consume the link’s power budget, creating instability, latency spikes, or intermittent downtime on 120km CWDM trunk links.

Q10: Can standard EDFA amplifiers extend the reach of 120km CWDM modules?
A: No, standard EDFA amplification cannot extend general CWDM wavelength coverage. Traditional EDFAs only amplify the narrow C-band spectrum between 1530nm and 1565nm and cannot boost outer CWDM channels such as 1470nm or 1610nm. To surpass 120km transmission distances, network designers must adopt professional DWDM infrastructure. Our 1570nm high-power CWDM modules deliver stable, clean, amplifier-free passive 120km transmission for maximum link reliability.
Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  • HYTOPTODEVICE 1.25G CWDM SFP transceiver module  120km smf for Internet Service Provider (ISP) Gigabit Ethernet communication links,
  • hytoptodevice 1G CWDM SFP TRANsceiver 120km smf for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • cisco compatible 1.25G 1000BASE-CWDM sfp optical transceiver bulk supply for Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceiver modules for ISP, data center
使用HTML,JS,CSS制作页面模块,让你的网站变得更受欢迎

Download